Get The Most Updated SCP-NPM Dumps To SolarWinds Certified Professional Certification
SolarWinds Certified SCP-NPM Dumps Questions Valid SCP-NPM Materials
SolarWinds SCP-NPM (SolarWinds Network Performance Monitor) exam is a certification that is designed for IT professionals who are looking to validate their skills and knowledge in network performance monitoring. SCP-NPM exam is conducted by SolarWinds, a leading provider of network management and monitoring software. SolarWinds Network Performance Monitor (NPM) Exam certification is widely recognized in the industry and is considered to be an important credential for IT professionals who specialize in network performance monitoring.
The SCP-NPM certification exam is an essential credential for network professionals who use SolarWinds Network Performance Monitor. It validates the practical skills and knowledge of network administrators in using the software to monitor, troubleshoot, and optimize network performance. SolarWinds Network Performance Monitor (NPM) Exam certification is widely recognized in the industry and can help professionals advance their careers by demonstrating their proficiency in using the SolarWinds NPM software.
NEW QUESTION # 28
How does NPM calculate capacity usage trends?
- A. Volume capacity
- B. Capacity forecasting widget
- C. Average calculation
- D. Historical data
Answer: D
NEW QUESTION # 29
NetPath can analyze paths to which network segments?
- A. Hybrid Networks
- B. Cloud Networks
- C. On-premise networks
- D. All of the above
Answer: D
NEW QUESTION # 30
Retention policies require you to keep Syslog messages in the database for 9 days before you can discard them. Syslog messages from 8 days ago are missing.
What is likely the issue?
- A. Default Syslog web filter is seven days
- B. Default Syslog retention period is seven days
- C. Detailed records are summarized after seven days
- D. Database compaction runs weekly
Answer: B
NEW QUESTION # 31
When you configure a report, you can limit access to specific users.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 32
The finance department asks to view select reports from NPM. Because of compliance policies, you cannot create accounts in the Web Console for users outside of the IT department. How do you allow the finance department to view reports without a user account?
- A. Enable the Link only option on the report
- B. Create a service account for Finance
- C. Create a DirectLink account in the Web Console
- D. Enable the Guest account
Answer: B
NEW QUESTION # 33
You add several nodes for monitoring and can see detailed information on those nodes in the Orion Web Console. However, when you look at the nodes in Orion Maps, the connections between the nodes are not showing. What is a likely reason?
- A. You did not enable Layer 2 and Layer 3 topology polling on those nodes
- B. You did not enable SNMP polling
- C. You did not add the node topology OIDs to the MIB database
- D. A firewall is blocking polling between the nodes and the Orion server
Answer: A
NEW QUESTION # 34
How are Orion agents licensed?
- A. Agents requite the SolarWinds Agent Provisioning module SAP
- B. Only Windows agents need to be licensed, Linux is free
- C. Licenses are available in a set of one upon request
- D. No separate license is required
Answer: B
NEW QUESTION # 35
You start a new job where NPM is already in use. As soon as you are added to the alert list, you begin receiving "high traffic utilization" alerts from a handful of interfaces.
When you check the alert, the traffic spike has ended. Your new colleagues advise you to ignore these alerts because the spikes rarely last for more than a couple of minutes and are only a concern if they last longer.
How should NPM be modified so you receive fewer false alerts?
- A. Increase the statistics polling frequency on the problematic interfaces
- B. Increase the status polling frequency on the problematic interfaces
- C. Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
- D. Configure the alert so that it resets only when traffic utilization remains high fora sustained period
Answer: C
NEW QUESTION # 36
You have two groups of users - one in Sydney and one in Perth. How do you limit the users within the Orion Platform so they only have access to the devices in their location?
- A. Configure the Orion Web Console settings to show only devices in the user's geographical location
- B. Configure Network Atlas to show only devices in their geographical location
- C. Group devices into geographical Orion groups and use single group Account limitations to limit user access
- D. Use the Orion Service Manager to limit user access to nodes only in their location
Answer: C
NEW QUESTION # 37
You use NPM to monitor a set of physical servers. The server team decides to virtualize these servers using VMware. Which part of your virtual infrastructure will NPM no longer be able to monitor?
- A. Virtualization environment tree
- B. VM sprawl monitoring
- C. Virtualization host hardware health
- D. Virtualization host and VM performance metrics
Answer: C
NEW QUESTION # 38
Network performance over an inter-campus Ethernet link is slow. One side of the connection is experiencing a high number of packet drops. What information in NPM can you review to help discover the cause of the issue?
- A. MTU of each side of the link
- B. Packet loss on the nodes on either side of the connection
- C. Routing tables on each side of the link
- D. Possible Duplex Mismatches
Answer: D
NEW QUESTION # 39
Your network includes the headquarters and three remote sites. Users from remote site A complain they do not have access to the company's accounting server. Users from remote site B and C have access to the accounting server. How can you find the source of the issue?
- A. Use NetPath to see if there are problem areas between remote site A and the headquarters
- B. Use NetPath to see if there are problem areas between remote site A and remote sites B and C
- C. Verify that the accounting servers' CPU utilization are not abnormally high
- D. Verify that the accounting servers are up
Answer: A
NEW QUESTION # 40
You run a Network Discovery and discover devices that you do not want to monitor. What feature can you use to exclude those devices from future discoveries?
- A. Discovery Trash List
- B. Discovery Ignore List
- C. Discovery White List
- D. Discovery Watch List
Answer: B
NEW QUESTION # 41
You want to create a custom poller for a device. When you select the OID you get an "OID not supported" error. What does this mean?
- A. Your firewall is blocking SNMP requests
- B. This OID requires the read/write community string
- C. The SNMP agent on the device does not report on this OID
- D. The SNMP string that you used is incorrect
Answer: C
NEW QUESTION # 42
You need to change the polling method from ICMP to SNMP on 200 nodes you monitor with Orion. How would you best accomplish this?
- A. Use the Orion Polling Configuration tool to change polling methods
- B. Unmanage all the nodes and remanage them choosing SNMP as the polling method
- C. Bulk select nodes in Manage Nodes and change the polling method
- D. Edit each individual node and change the polling method
Answer: A
NEW QUESTION # 43
Your network has critical devices on the opposite side of a WAN link from you SolarWinds server. You do not want alerts about the devices if the router (name = "target") that connects your SolarWinds server to the remote site is down. How do you configure Alert Suppression?
- A. Suppress alert when any of the following apply: Node Name is equal to "target" / Node Status is equal to "Warning"
- B. Suppress alert when all of the following apply: Node Name is equal to "target" / Interface Status is equal to "Warning"
- C. Suppress alert when any of the following apply: Node Name is equal to "target" / Interface Status is equal to "Down"
- D. Suppress alert when all of the following apply: Node Name is equal to "target" / Node Status is equal ta "Down"
Answer: C
NEW QUESTION # 44
The Universal Device Poller retrieves management data in which format?
- A. OID
- B. XML
- C. WMI
- D. ANSI 1
Answer: A
NEW QUESTION # 45
Which metrics can NPM monitor on an Ethernet switch? (Choose all that apply.)
- A. CPU utilization
- B. Buffer misses
- C. Duplex mismatches
- D. Configuration changes
Answer: B,C,D
NEW QUESTION # 46
How do you assign users access to select reports?
- A. Configure the report and add a Report Limitation. Assign the limitation to users who need access to the report
- B. Create the reports while logged in as each user and set permissions
- C. Use custom properties and account limitations to control report access
- D. Save the reports in different sub-directories and set the permissions for each user
Answer: A
NEW QUESTION # 47
......
SolarWinds SCP-NPM (SolarWinds Network Performance Monitor) Certification Exam is designed for network professionals who want to validate their skills in using the SolarWinds Network Performance Monitor (NPM) software. SCP-NPM exam tests your knowledge of network monitoring, troubleshooting, and performance analysis using NPM. SolarWinds Network Performance Monitor (NPM) Exam certification is recognized by industry professionals as a standard for network management expertise.
SCP-NPM Premium PDF & Test Engine Files with 77 Questions & Answers: https://www.torrentvce.com/SCP-NPM-valid-vce-collection.html
Current SCP-NPM Exam Dumps [2023] Complete SolarWinds Exam Smoothly: https://drive.google.com/open?id=1FXj2CCd0qODF8nlYhGlKrjNEczkhlm9O