Get Special Discount Offer of SCP-NPM Certification Exam Sample Questions and Answers
New SCP-NPM Dumps For Preparing SolarWinds Certified Professional Certified SolarWinds Exam Well
NEW QUESTION # 15
You inherit an environment with NPM and begin to receive High Traffic Utilization alerts from interfaces. When you view the alert, the issue is resolved. How do you modify NPM to receive fewer false alerts?
- A. Increase the statistics polling frequency on the problematic interfaces
- B. Configure the alert so that it resets only when traffic utilization remains high for a sustained period
- C. Increase the status polling frequency on the problematic interfaces
- D. Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
Answer: A
NEW QUESTION # 16
You need to implement service level agreement (SLA) reporting for a new hosted data center service. Which SLA performance metric should you track?
- A. Interface discards
- B. Memory utilization
- C. Response time
- D. CPU utilization
Answer: D
NEW QUESTION # 17
You deploy a new router on your network. What should you do to ensure NPM correctly interprets SNMP traps from the device?
- A. Update the MIB database
- B. Review your firewall rules to ensure the traps are not blocked
- C. Verify that NPM is using the correct SNMP community strings
- D. Contact the router vendor fora firmware update
Answer: C
NEW QUESTION # 18
How many days of data must your database contain in order to see Capacity Forecast Charts in NPM?
- A. 7 Days
- B. 3 Days
- C. 1 Day
- D. 5 Days
Answer: A
NEW QUESTION # 19
Capacity planning is available for which metrics?
- A. Response Time, Interface, and Volume Utilization
- B. Hardware Health
- C. Up/Down, Packet Loss, and Latency
- D. CPU, Memory, and Interface
Answer: A
NEW QUESTION # 20
Status, Average Response Time, and Packet Loss are the only node details data you can view for your switch A device. The node details of your identical switch B device show Status, Average Response Time, and Packet Loss and other statistics. How can you monitor the other statistics on switch A and not lose any historical data?
- A. Add switch A again without deleting it first, and this time choose "Most Devices: SNMP and ICMP" as the polling method
- B. Edit the node properties of switch A and change the polling method to "Status Only: ICMP"
- C. Edit the node properties of switch B and change the polling method to "Status Only: ICMP"
- D. Delete switch A, and then add it again and this time choose "Most Devices: SNMP and ICMP" as the polling method
- E. Edit the node properties of switch A and change the polling method to "Most Devices: SNMP and ICMP"
Answer: A
NEW QUESTION # 21
In which scenario is an agent the best solution?
- A. If hosts in distributed networks have overlapping IP addresses
- B. If the WMI ports are already in use on Linux
- C. If you cannot allow ICMP polling on your routers
- D. If Native GLX log file monitoring is required
Answer: D
NEW QUESTION # 22
What is required of your nodes to detect duplex mismatches? (Choose all that apply.)
- A. The nodes must support topology and be interconnected
- B. Ensure corresponding values for each interface are different
- C. Unify the duplex mode configuration on neighboring interfaces
- D. Duplex of both devices must be identified as full or half
Answer: B,D
NEW QUESTION # 23
You created a Universal Device Poller (UnDP) but cannot find an OID in the MIB tree. How do you resolve this issue?
- A. Update the MIB database
- B. Add the node to NPM for monitoring
- C. Restart the Universal Device Poller
- D. Rediscover the node via Network Sonar Discovery
Answer: A
NEW QUESTION # 24
After you create an NPM report with custom charts for availability and response time metrics, you schedule the report and add an action to export it. But you cannot export it as an Excel file. What is the likely reason?
- A. The custom charts only support a PDF export
- B. Excel file formats are not supported
- C. You must link the report with a URL in an email action to run live in the web console
- D. You do not have the permissions to export the report
Answer: B
NEW QUESTION # 25
You need to build an Orion Map to show the relationships and connections between your Cloud servers and on premise infrastructure. You add the nodes but discover that the Orion Platform is not automatically mapping the connection between your cloud server and on premise router. You have verified that layer 2 and layer 3 topologies are being polled on the devices. How do you resolve this issue?
- A. You need to turn off layer 2 and layer 3 topology polling for cloud monitoring
- B. You need to open the topology ports in your firewall between the on premise node and the cloud node
- C. You cannot monitor the connection between on premise and off premise devices
- D. You need to configure a custom connection between the cloud node and the on premise node
Answer: D
NEW QUESTION # 26
You run ten reports on three assorted weekly schedules and send the results to the network operations distribution list. The email address for the distribution list changed, and you must update the new email address to send the reports. How do you implement this update?
- A. Make a copy of each report, edit the action to change the email address
- B. Use the Schedule Manager to edit each action on each report schedule, and change the email address
- C. Use the Action Manager to edit each action on each report schedule, and change the email address
- D. Edit each action on each report schedule, and change the email address
Answer: D
NEW QUESTION # 27
You configured devices to send SNMP traps to NPM, but do not see the messages in the Orion Web Console. You verified that the firewall ports are open and the devices are correctly configured.
What can you verify to troubleshoot the cause?
- A. Verify you use Log Analyzer to view traps
- B. Verify you configured the SNMP Traps view in the Orion Web Console
- C. Verify the SNMP trap service is running
- D. Verify that you have the SNMP Trap module installed for NPM
Answer: C
NEW QUESTION # 28
Which is not true for Device Studio Poller?
- A. Can perform logical operations or transformations on the polled data
- B. Collects data from Orion Failover Engine or Hot Standby Engines
- C. Polled values are displayed in existing resources
- D. Can poll multiple OIDs for a given technology
Answer: C
NEW QUESTION # 29
How does NPM calculate capacity usage trends?
- A. Historical data
- B. Capacity forecasting widget
- C. Volume capacity
- D. Average calculation
Answer: A
NEW QUESTION # 30
You want to create a custom poller for a device. When you select the OID you get an "OID not supported" error. What does this mean?
- A. Your firewall is blocking SNMP requests
- B. The SNMP agent on the device does not report on this OID
- C. This OID requires the read/write community string
- D. The SNMP string that you used is incorrect
Answer: B
NEW QUESTION # 31
What is the average resource consumption of an agent?
- A. Less than 1% CPU, no storage because the agent is 1% in memory for faster access
- B. Less than 1% CPU, max 1 MB of memory, 1 MB storage
- C. Agents run as a virtual process and do not require local resources
- D. Between 1-2% CPU if the bandwidth is less than 8 KB/s
Answer: B
NEW QUESTION # 32
Your team member cannot see any reports in the Orion Console. What can cause this issue?
- A. The No Reports limitation is applied to the user account
- B. The Report Writer is not installed
- C. The reports are configured with more than one limitation category
- D. The SQL server is on a different system than the SolarWinds server
Answer: A
NEW QUESTION # 33
You receive traps from your network devices and want to alert on a select message. How do you accomplish this?
- A. Go to the Traps view and configure a new Log Viewer rule
- B. Configure Syslog alert actions on the Alert Actions tab
- C. You cannot alert on traps through the Orion Platform
- D. Use Traps in Orion Alerts to configure the default trap alert to fire on the trap message you select to alert on
Answer: D
NEW QUESTION # 34
Your network has critical devices on the opposite side of a WAN link from you SolarWinds server. You do not want alerts about the devices if the router (name = "target") that connects your SolarWinds server to the remote site is down. How do you configure Alert Suppression?
- A. Suppress alert when all of the following apply: Node Name is equal to "target" / Node Status is equal ta "Down"
- B. Suppress alert when any of the following apply: Node Name is equal to "target" / Node Status is equal to "Warning"
- C. Suppress alert when all of the following apply: Node Name is equal to "target" / Interface Status is equal to "Warning"
- D. Suppress alert when any of the following apply: Node Name is equal to "target" / Interface Status is equal to "Down"
Answer: D
NEW QUESTION # 35
How do you assign users access to select reports?
- A. Create the reports while logged in as each user and set permissions
- B. Use custom properties and account limitations to control report access
- C. Save the reports in different sub-directories and set the permissions for each user
- D. Configure the report and add a Report Limitation. Assign the limitation to users who need access to the report
Answer: D
NEW QUESTION # 36
Half of your objects in a nested map are down, but the top level map is up. What is the cause?
- A. You set map status thresholds to above 50%
- B. You set availability thresholds for devices to above 50%
- C. You set availability thresholds for devices to below 50%
- D. You set map status thresholds to below 50%
Answer: D
NEW QUESTION # 37
You created a Universal Device Poller. You want to create an alert based on this custom poller. When you create the alert, you select "I want to alert on: Custom Poller." How would you identify the custom poller within the trigger condition?
- A. Using the MIB used in your UnDP
- B. Using the enabled status
- C. Using the SNMP get type
- D. Using the Unique Name of your UnDP
Answer: D
NEW QUESTION # 38
......
IT professionals who pass the SolarWinds SCP-NPM Exam demonstrate a deep understanding of network performance monitoring concepts and best practices. They are skilled in using SolarWinds NPM to optimize network performance and ensure high availability of critical applications and services. SolarWinds Network Performance Monitor (NPM) Exam certification also validates their ability to troubleshoot complex network issues and provide effective solutions that meet the needs of their organization.
Updated SCP-NPM Dumps Questions Are Available For Passing SolarWinds Exam: https://www.torrentvce.com/SCP-NPM-valid-vce-collection.html
Free UPDATED SolarWinds SCP-NPM Certification Exam Dumps is Online: https://drive.google.com/open?id=1YxFeEbUL1tYNbxgzKOVXP87Nf5yCsH__