Unique Top-selling C_IBP_2202 Exams - New 2023 SAP Pratice Exam
SAP Certified Application Associate Dumps C_IBP_2202 Exam for Full Questions - Exam Study Guide
NEW QUESTION 28
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them?
Note: There are 2 correct Answers to this question.
- A. SAP IBP for sales and operations
- B. SAP IBP for demand
- C. DDMRP
- D. SAP IBP for response and supply
Answer: A,D
NEW QUESTION 29
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: There are 3 correct Answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. These filters are always applied based on the values stored in the database.
- C. You can add (or delete) planning objects to a planning view after these filters are applied.
- D. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- E. You can only apply one value-based filter per planning view.
Answer: B,D,E
NEW QUESTION 30
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints?
Note: There are 2 correct Answers to this question.
- A. Enter transportation lead times.
- B. Create product substitutions.
- C. Set minimum and maximum lot sizes.
- D. Model adjusted transport receipts.
Answer: A,D
NEW QUESTION 31
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario?
Note: There are 2 correct Answers to this question.
- A. Excess stock can be generated and will need to be staged in an overflow warehouse.
- B. Enough demands can be pulled forward and pull production will occur.
- C. Capacity leveling will be possible for production and storage resources.
- D. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
Answer: B,D
NEW QUESTION 32
The Analytics Advanced app allows you to work with different types of charts. What can be the origin of the charts you can work with?
- A. Custom Alerts
- B. Dashboards Advanced
- C. Process Templates
- D. SAP IBP VBA Add-in template
Answer: D
NEW QUESTION 33
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check.
Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Add a new time profile level to the time profile.
- B. Change the description of the attributes in the time profile.
- C. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
- D. Change the past and future horizon of the levels in the time profile.
Answer: B,D
NEW QUESTION 34
Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.
- A. To filter attributes based on specific values
- B. To filter data in an Application Job template
- C. To filter using attributes that have a large number of values
- D. To filter attributes based on other attribute filters
Answer: C,D
NEW QUESTION 35
Which features apply to quota violations modeled with the optimizer?
- A. Quotas can be modeled for sourcing location, production, and consensus demand.
- B. Quotas require sourcing ratios to be maintained.
- C. Min and Max Quotas have to be the same as sourcing ratios.
- D. Quota violation cost is maintained as an attribute as a key figure.
Answer: B
NEW QUESTION 36
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Selecting by attribute with option 'contain' is possible.
- B. Specifying target key figure that is time independent is possible.
- C. Specifying source key figure is mandatory.
- D. Specifying target key figure is mandatory.
Answer: C,D
NEW QUESTION 37
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?
- A. Capacity expansion with additional costs
- B. Production source validity at the start of seasonal peak
- C. Incremental production values
- D. Adjusted production interactive values
Answer: A
NEW QUESTION 38
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on?
Note: There are 2 correct Answers to this question.
- A. Number of analytics charts displaying key figures' values
- B. Number of local members and complexity of calculations
- C. Excessive IBP formatting in Excel UI
- D. Complex calculation graphs for key figures
Answer: C,D
NEW QUESTION 39
How can you make charts and dashboards private?
- A. Choose only relevant key figures and filters in the Analytics Advanced application.
- B. Enable the relevant settings in the global configuration parameters.
- C. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
- D. Set restrictions for charts in the Permission filter application.
Answer: B
NEW QUESTION 40
Which conditions are prerequisites for key figure disaggregation?
- A. The key figure is set to Not Editable.
- B. The key figure is calculated and editable.
- C. The key figure is calculated and aggregation mode is selected.
- D. The key figure is stored and editable.
Answer: D
NEW QUESTION 41
How can you check if key figure is editable or non-editable?
- A. Using the Edit View and then the Edit Planning View option
- B. Using the Web-based Planning app when selecting key figures
- C. Using the Key Figure Calculations app
- D. Using the Analytics Advanced app when selecting key figures
Answer: B
NEW QUESTION 42
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by an integer and profiles by an alphanumeric prefix.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by a start and end date and profiles by an integer.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
Answer: C
NEW QUESTION 43
Which of the following settings can you use in your supply planning background job triggered from Excel?
Note: There are 2 correct Answers to this question.
- A. Planning unit
- B. Target currency
- C. Type of algorithm to use
- D. UOM to ID
Answer: C,D
NEW QUESTION 44
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. By restricting data input in the Key Figure Configuration app
- B. Select Protect Active Worksheet in the About section of SAP IBP tab
- C. IBP -> Data Validation in IBP Formatting Sheet tab
- D. IBP -> Lock Selected cells in IBP Formatting Sheet tab
Answer: A
NEW QUESTION 45
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed? Note: There are 2 correct Answers to this question.
- A. Finite heuristics can achieve demand prioritization and pegging.
- B. Push and Pull production models are used by the optimizer.
- C. Planning results can be generated faster by the optimizer.
- D. Prioritization of demand elements one by one is achieved by heuristics.
Answer: A,B
NEW QUESTION 46
Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct Answers to this question.
- A. The total value can be added before or after the selected attribute.
- B. The total number of attributes that can use subtotals in the planning view can be restricted.
- C. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- D. Only attribute-based totals can be added to the planning view.
Answer: A,B
NEW QUESTION 47
You want to set up demand sensing to analyze demand changes in execution or close to execution windows.
Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. The result generates sensed demand data at the monthly time granularity for the full time horizon
- B. Set up the forecast model to be executed at product-location level.
- C. It is mandatory to load historical lag-based snapshot data.
- D. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
Answer: C,D
NEW QUESTION 48
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. New instances of templates allow for re-use of the same processes again.
- B. Each step depicted in the template can have tasks associated with it.
- C. The number of steps in a process template is the same for all implementations.
- D. All process templates are assigned to dashboards.
Answer: B,D
NEW QUESTION 49
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process?
Note: There are 2 correct Answers to this question.
- A. You can choose to import only some of the items that were exported.
- B. You can move a transported item from one collection to another.
- C. You can export from a planning area that is on a different release.
- D. You can create a collection of items and export it.
Answer: B,C
NEW QUESTION 50
......
SAP C_IBP_2202 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Best way to practice test for SAP C_IBP_2202: https://www.torrentvce.com/C_IBP_2202-valid-vce-collection.html