Ultimate Guide to Prepare AZ-600 Certification Exam for Azure Stack Hub Operator Associate in 2021
Use Real AZ-600 Dumps - Microsoft Correct Answers updated on 2021
NEW QUESTION 45
You need to identify the PEP information for the integrated system in Chicago. The solution must meet the technical requirements.
What should you use?
- A. the Help + support blade of the administrator portal
- B. Properties on the Region management blade of the administrator portal
- C. the HLH configuration file
- D. the Get-AzsRegistrationToken cmdlet
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-privileged-endpoint?view=azs-2008
NEW QUESTION 46
You and a Microsoft Support Engineer are troubleshooting an Azure Stack Hub integrated system. The security team at your company requires an audit trail whenever management actions are performed on the integrated system.
You unlock the privileged endpoint (PEP) and perform several troubleshooting tasks that resolve the issue.
Which cmdlet should you run next?
- A. Invoke-AzureStackOnDemandLog
- B. Exit-PSSession
- C. Get-AzureStackLog
- D. Close-PrivilegedEndpoint
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-privileged-endpoint?view=azs-2008
NEW QUESTION 47
You have an Azure Stack Hub integrated system.
A scale unit node has a hardware failure.
You replace the physical server based on the field replacement unit (FRU) documentation of the OEM hardware vendor.
You need to reintroduce the node to the scale unit.
Which PowerShell cmdlet should you run?
- A. Enable-AzsScaleUnitNode
- B. Restart-AzsInfrastructureRole
- C. Add-AzsScaleUnitNode
- D. Start-AzsScaleUnitNode
- E. Repair-AzsScaleUnitNode
Answer: E
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-node-actions?view=azs-
2008&tabs=az1#repair
NEW QUESTION 48
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Stack Hub integrated system that connects to the Internet.
You need to update the Azure Event Hubs service.
Solution: From a privileged endpoint (PEP) session, you run the Install-AzsUpdatecmdlet.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-update-monitor?view=azs-2008 Implement Data Center Integration Question Set 1
NEW QUESTION 49
You plan to deploy two Azure Stack Hub integrated systems named AZStack1 and AZStack2.
AZStack1 must meet the following requirements:
* Connect to the Internet.
* Have minimal capital expenditures.
* Use the minimum number of on-premises servers for identity.
* Have no existing licenses for Windows virtual machines deployed.
AZStack2 must meet the following requirements:
* Be disconnected from the Internet.
* Use the minimum number of on-premises servers for identity.
* Support the syndication of Azure Stack Hub Marketplace items.
Which identity provider and licensing model should you use for each integrated system? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-connected-deployment?view=azs-2008
NEW QUESTION 50
You have an Azure Stack Hub integrated system.
You need to update the integrated system to use a non-Windows NTP service that has a host name of ntp1.contoso.com.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-configure-time?view=azs-2008
NEW QUESTION 51
You have an Azure Stack Hub integrated system that uses an Azure Active Directory (Azure AD) identity provider.
You have a group named AppGroup1.
You need to provide an application with the ability to access Azure Stack Hub resources by using AppGroup1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Sign in to the Azure portal
2 - Create an app resgistration
3 - Generate a client secret
4 - Add the app to a group
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-create-service-principals?view=azs-2008&tabs=az1%2Caz2&pivots=state-connected
NEW QUESTION 52
You remove all the workloads from the int1 region and change the registration model to capacity.
You prepare additional Azure AD tenants for each partner.
You need to configure multitenancy.
Which two actions should you perform for each guest tenant? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Run the Register-AzSWithMyDirectoryTenantcmdlet and specify https:// adminmanagement.int1. northwind.comas the endpoint.
- B. Run the Register-AzSWithMyDirectoryTenantcmdlet and specify https:// management.int1. northwind.comas the endpoint.
- C. Run the Register-AzSGuestDirectoryTenantcmdlet and specify https://
adminmanagement.int1. northwind.comas the endpoint. - D. Run the Register-AzSGuestDirectoryTenantcmdlet and specify https://
management.int1. northwind.comas the endpoint. - E. Change the registration model to pay-as-you-use.
Answer: B,C
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-enable-multitenancy?view=azs-2008 Manage Identity and Access Question Set 2
NEW QUESTION 53
You have an Azure Stack Hub integrated system.
You need to update the integrated system to use a non-Windows NTP service that has a host name of ntp1.contoso.com.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-configure-time?view=azs-2008
NEW QUESTION 54
Which three components are required to configure an Azure Stack Hub infrastructure backup? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. an SMB file share in the trusted network perimeter
- B. an Azure Blob storage account
- C. credentials that have write access to storage
- D. an SMB file share in Azure
- E. an encryption certificate
Answer: A,C,E
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-backup-reference?view=azs-2008
NEW QUESTION 55
You have an Azure Stack Hub integrated system that connects to the internet.
You need to deploy Azure Event Hubs to the integrated system and ensure that users can create Event Hubs resources. The solution must minimize administrative effort.
Which three actions should you perform in a sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, chat or text message Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/event-hubs-rp-install?view=azs-2008&pivots=state-conne
NEW QUESTION 56
You plan to deploy an Azure Stack Hub integrated system that will connect to the Internet.
You need to define the public VIP pool.
What is the smallest subnet mask that you can use for the public VIP pool?
- A. /22
- B. /25
- C. /26
- D. /27
Answer: C
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-network?view=azs-2008
NEW QUESTION 57
You deploy an Azure Stack Hub integrated system that contains an Azure App Service deployment. The integrated system uses an Azure Active Directory (Azure AD) identity provider.
You need to provide users with the ability to deploy App Service web apps directly from their GitHub repositories.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-app-service-configure-deployment-sources?vi
NEW QUESTION 58
You have an Azure Stack Hub integrated system that has 10 user subscriptions. Each subscription contains approximately 50 virtual machines.
You are planning a backup and restore strategy for the integrated system.
You need to identify which type of backup to use to back up specific resources.
What should you identify for each resource? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-backup-enable-backup-console?view=azs-200
NEW QUESTION 59
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to install an update to an Azure Stack Hub integrated system.
You need to verify whether the integrated system is healthy, and whether you can apply the update. You must achieve the goal as quickly as possible.
Solution: From the administrator management endpoint, you run
Test-AzureStack -Group "UpdateReadiness".
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-diagnostic-test?view=azs-2008
NEW QUESTION 60
You need to identify the PEP information for the integrated system in Chicago. The solution must meet the technical requirements.
What should you use?
- A. the Help + support blade of the administrator portal
- B. Properties on the Region management blade of the administrator portal
- C. the Get-AzsRegistrationTokencmdlet
- D. the HLH configuration file
Answer: B
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-privileged-endpoint?view=azs-2008 Manage Infrastructure Question Set 3
NEW QUESTION 61
You need to identify the certificate for the integrated system in Chicago. The solution must meet the technical requirements.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
When deploying Azure Stack Hub in disconnected mode it is recommended to use certificates issued by an enterprise certificate authority. This is important because clients accessing Azure Stack Hub endpoints must be able to contact the certificate revocation list (CRL).
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-pki-certs?view=azs-2008
NEW QUESTION 62
You have an Azure Stack Hub integrated system that is disconnected from the Internet.
During an update, an error occurs that prevents you from accessing the administrator portal.
While troubleshooting the issue, a Microsoft Support Engineer requests that you collect and send the relevant logs.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-get-azurestacklog?view=azs-2008
NEW QUESTION 63
You start the update of an Azure Stack Hub integrated system. The Update run details are shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-apply-updates?view=azs-2008
NEW QUESTION 64
You have an Azure Stack Hub integrated system and an offer to which users can subscribe.
You need to prevent users and operators from creating new user subscriptions based on the offer without affecting the existing user subscriptions.
What should you do?
- A. Delete the offer and create a new private offer.
- B. Change the offer state to Private.
- C. Change the offer state to Decommissioned.
- D. Change the offer state to Public.
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-create-offer?view=azs-2008
NEW QUESTION 65
You have an Azure Stack Hub integrated system that was recently moved to a new datacenter and powered on.
You need to verify whether the infrastructure components are fully operational.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Connect to the administrator portal
- B. Run the Test-AzureStack cmdlet
- C. Run the Get-AzureStackStampInformation cmdlet
- D. Run the Start-AzureStack cmdlet
- E. Connect to the privileged endpoint (PEP)
Answer: B,D,E
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-diagnostic-test?view=azs-2008
NEW QUESTION 66
You open the Resource providers blade for a user subscription as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/azure-services-resource-providers
NEW QUESTION 67
You plan to deploy an Azure Stack Hub integrated system that will connect to the Internet.
You need to define the public VIP pool.
What is the smallest subnet mask that you can use for the public VIP pool?
- A. /22
- B. /25
- C. /26
- D. /27
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-stack/operator/azure-stack-network?view=azs-2008
NEW QUESTION 68
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Stack Hub integrated system that connects to the Internet. The integrated system uses an Enterprise Agreement (EA) for licensing.
You are creating an Azure Resource Manager template to generate a marketplace item for a virtual machine that runs Windows Server 2019 Datacenter and a custom application.
You need to ensure that Windows Server is licensed by using the bring-your-own-license model.
Solution: You add licenseType: None to the Azure Resource Manager template.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION 69
......
Azure Stack Hub Operator Associate -AZ-600 Exam-Practice-Dumps: https://www.torrentvce.com/AZ-600-valid-vce-collection.html
AZ-600 Premium Files Test pdf - Free Dumps Collection: https://drive.google.com/open?id=1l4WTDgixgHcpvvFwzG53sa4q0mm3itYd