The Ultimate Fortinet FCP_FAZ_AD-7.4 Dumps PDF Review
Achieve The Utmost Performance In FCP_FAZ_AD-7.4 Exam Pass Guaranteed
NEW QUESTION # 92
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
- A. System information
- B. Report information
- C. Logs from registered devices
- D. Database snapshot
Answer: A,B
Explanation:
A FortiAnalyzer system backup includes configurations, report settings, and system information, but it does not include logs from registered devices or database snapshots. Logs are stored separately and are not part of the system configuration backup.
NEW QUESTION # 93
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem?
- A. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
- B. The ADOM disk quota is set too low based on log rates.
- C. CPU resources are too high.
- D. The total disk space is insufficient and you need to add other disk.
Answer: B
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG FAZ/1100_Storage/0017_Deleted%20device%20logs.htm
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/87802/automatic-deletion
NEW QUESTION # 94
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. ADOM mode is configured with Advanced mode.
- B. A trusted host is configured.
- C. fortinet is assigned the Standard_User administrative profile.
- D. fortinet is assigned Restricted_User administrative profile.
Answer: C
Explanation:
Administrator Fornetet is able to view logs and perform device management tasks such as adding and removing registered devices, but cannot create a mail server to send alert mails. The causes of this problem are:
fortinet is assigned a Restricted_User administrative rights profile.
Administrators who are assigned as Restricted_User have restricted access, which may include viewing logs and performing certain device management tasks, but not more advanced administrative functions such as configuring mail servers. Such permission restrictions prevent them from performing configuration changes that require higher permissions.
NEW QUESTION # 95
Refer to the exhibit.
The exhibit shows "remoteservergroup" is an authentication server group with LDAP and RADIUS servers.
Which two statements express the significance of enabling "Match all users on remote server" when configuring a new administrator? (Choose two.)
- A. Administrator can log in to FortiAnalyzer using their credentials on remote servers LDAP and RADIUS.
- B. It creates a wildcard administrator using LDAP and RADIUS servers.
- C. Use remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at anytime.
- D. It allows administrators to use two-factor authentication.
Answer: A,B
NEW QUESTION # 96
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.
Similarly, which feature you can use for FortiView?
- A. Export to Report Chart
- B. Export to PDF
- C. Export to Custom Chart
- D. Export to Chart Builder
Answer: A
Explanation:
Reference:
Similar to the Chart Builder feature in Log View, you can export a chart from a FortiView. The chart export includes any filters you set on the FortiView. FortiAnalyzer_7.0_Study_Guide-Online pag. 292.
NEW QUESTION # 97
View the exhibit.
What does the data point at 14:35 tell you?
- A. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- B. The sqlplugind daemon is ahead in indexing by one log.
- C. FortiAnalyzer is dropping logs.
- D. FortiAnalyzer is indexing logs faster than logs are being received.
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/47690/insert-rate-vs-receive-rate-widget
NEW QUESTION # 98
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can include only FortiGate devices that are part of the same Security Fabric
- B. It can include all Fortinet devices that are part of the same Security Fabric
- C. It can be used for fast data processing and log correlation
- D. It can be used to facilitate communication between devices in same Security Fabric
Answer: B,C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/448471/creating-a-security-fabric-adom
NEW QUESTION # 99
Which two methods can you use to restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Use administrator profiles.
- B. Limit access to specific virtual domains.
- C. Configure trusted hosts.
- D. Fabric connectors to external LDAP servers.
Answer: A,C
Explanation:
To restrict administrative access on FortiAnalyzer, two effective methods are using administrator profiles and configuring trusted hosts. Administrator profiles allow for defining the level of access and permissions for different administrators, controlling what each administrator can see and do within the FortiAnalyzer unit. Configuring trusted hosts enhances security by limiting administrative access to specified IP addresses, ensuring that administrators can only connect from approved locations or networks, thus preventing unauthorized access from outside specified subnets or IP addresses.
Reference: FortiAnalyzer 7.4.1 Administration Guide, "Administrators" and "Trusted hosts" sections.
NEW QUESTION # 100
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for each device in the ADOM
- B. The disk quota for the ADOM type
- C. The disk quota for the FortiAnalyzer model
- D. The disk quota for all devices in the ADOM
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage-policy
NEW QUESTION # 101
What is the purpose of trigger variables?
- A. To store the start times of playbooks with On_Schedule triggers
- B. To use information from the trigger to filter the action in a task
- C. To provide the trigger information to make the playbook start running
- D. To display statistics about the playbook runtime
Answer: D
NEW QUESTION # 102
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?
- A. Resolve IP addresses on FortiGate
- B. Configure local DNS servers on FortiAnalyzer
- C. Configure # set resolve-ip enable in the system FortiView settings
- D. Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve
Answer: A
Explanation:
https://packetplant.com/fortigate-and-fortianalyzer-resolve-source-and-destination-ip/
"As a best practice, it is recommended to resolve IPs on the FortiGate end. This is because you get both source and destination, and it offloads the work from FortiAnalyzer. On FortiAnalyzer, this IP resolution does destination IPs only"
NEW QUESTION # 103
Refer to the exhibit.
Laptopt is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin" and coming from Laptop1:
Which filter will achieve the desired result?
- A. operation-login & dstip==10.1.1.210 & userl-admin
- B. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
- C. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
- D. operation-login & performed_on=="GUI(10.1.1.210)' & user!=admin
Answer: B
Explanation:
On there the task was to create a filter for failed logins from any other location but the local computer: "Add the text performed_on!~10.0.1.10. This includes any attempts coming from devices with an IP address that is not the one configured on the Local-Client computer."
NEW QUESTION # 104
What does the disk status Degraded mean for RAID management?
- A. The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.
- B. One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system.
- C. The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal state.
- D. The hard driveiIs no longer being used by the RAID controller
Answer: D
NEW QUESTION # 105
Which daemon is responsible for enforcing the log file size?
- A. miglogd
- B. logfiled
- C. sqlplugind
- D. ofrpd
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 121: The logfiled process enforces the log file size and is also responsible for disk quota enforcement by monitoring the other processes.
NEW QUESTION # 106
Which tabs do not appear when FortiAnalyzer is operating in Collector mode?
- A. Event Management
- B. Device Manger
- C. FortiView
- D. Reporting
Answer: A
NEW QUESTION # 107
View the exhibit.
Why is the total quota less than the total system storage?
- A. 3.6% of the system storage is already being used.
- B. The logfiled process is just estimating the total quota
- C. The oftpd process has not archived the logs yet
- D. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation
NEW QUESTION # 108
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. Raw logs are reaching FortiAnalyzer faster than they can be indexed
- B. The received rate is almost at its maximum for this device
- C. The sqlplugind daemon is behind in log indexing by two logs
- D. Logs are being dropped
Answer: A
NEW QUESTION # 109
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin", and coming from Laptop1.
Which filter will achieve the desired result?
- A. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
- B. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
- C. operation-login & performed_on=="GUI(10.1.1.210)" & user!=admin
- D. operation-login & dstip==10.1.1.210 & user!-admin
Answer: B
NEW QUESTION # 110
......
Fortinet FCP_FAZ_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Achive your Success with Latest Fortinet FCP_FAZ_AD-7.4 Exam: https://www.torrentvce.com/FCP_FAZ_AD-7.4-valid-vce-collection.html
The FCP_FAZ_AD-7.4 Exam Test For Brief Preparation: https://drive.google.com/open?id=1MnT74-aTgqIlqGZgTXEgEpqVbbrb-laQ