TAKE CCNP Data Center 350-601 PRACTICE QUESTIONS FOR AMAZING RESULTS
Cisco 350-601 Exam Dumps Are Essential To Get Good Marks
Cisco 350-601 certification exam is an excellent opportunity for IT professionals to demonstrate their expertise in implementing core data center technologies. It is a challenging assessment that requires in-depth knowledge and practical skills in data center infrastructure, security, automation, and virtualization. Passing 350-601 exam will help professionals to advance their careers in the field of data center technologies and open up new opportunities for growth and development.
To pass the Cisco 350-601 exam, the candidate needs to have a good understanding of data center technologies and their implementation. The candidate should also have practical experience in designing and implementing data center solutions. 350-601 exam requires the candidate to have a good knowledge of Cisco data center technologies, including Cisco ACI, Cisco UCS, and Cisco Nexus.
The Cisco 350-601 exam consists of multiple-choice questions and simulations, and it is administered by Pearson VUE. Candidates have two hours to complete the exam, and they must achieve a passing score of at least 825 out of 1000 to earn the certification. 350-601 exam fee is $400 USD, and it is available in English and Japanese.
NEW QUESTION # 24
A network administrator attempts to automate the provisioning of several new Cisco Nexus switches. The administrator prepares a bootstrap configuration script for the task Due to the number of switches a zero-touch provisioning solution is preferred Additionally, some switches arrive with outdated software and should be automatically upgraded as part of the provisioning workflow Which solution meets the requirements'
- A. Ansible
- B. DHCP
- C. POAP
- D. NX-API
Answer: D
NEW QUESTION # 25
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two characteristics must be considered? (Choose two.)
- A. The rx/tx option is available for VLAN or VSAN SPAN sessions.
- B. Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.
- C. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
- D. A SPAN source port cannot be a destination SPAN port.
- E. SPAN source port can be monitored in multiple SPAN sessions.
Answer: D,E
Explanation:
SPAN (Switched Port Analyzer) is a feature that allows network traffic from one or more source ports to be mirrored to a destination port for analysis. When configuring SPAN on a Cisco Nexus 5000 Series switch, two characteristics must be considered:
* A SPAN source port can be monitored in multiple SPAN sessions. This means that the same port can send traffic to different destination ports for different purposes or applications.
* A SPAN source port cannot be a destination SPAN port. This means that a port cannot receive traffic from another port that it is already monitoring. This prevents loops and conflicts in the SPAN configuration.
References := Configuring SPAN
https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_1/Cisco_Ne
NEW QUESTION # 26
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets these requirements?
- A. SaltStack
- B. Puppet
- C. Terraform
- D. Kubemetes
Answer: B
Explanation:
Option C is the correct answer. Puppet is an open-source software configuration management tool that is used for deploying, configuring, and managing servers. It allows for the centralized management of various system configurations and aligns UCS servers to their desired state by periodically acquiring configurations from a centralized server. References:
* Cisco Data Center Core Technologies, Module 5: Data Center Automation and Orchestration, Lesson
5.1: Describe Automation and Orchestration Concepts, Topic 5.1.1: Configuration Management Tools
* Cisco Data Center Core Technologies, Module 5: Data Center Automation and Orchestration, Lesson
5.2: Implement Automation and Orchestration, Topic 5.2.2: Implement Puppet
NEW QUESTION # 27
Refer to the exhibit.
Which action must be taken before the maintenance policy can be committed?
- A. Set the soft shutdown timer to a specific time.
- B. Associate a service profile to the maintenance policy.
- C. Set the policy to apply the change on the next reboot.
- D. Specify a maintenance time by selecting a schedule.
Answer: D
NEW QUESTION # 28
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes. What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)
- A. performs a complete binary dump of the database as a bin file
- B. contains all of the runtime states and statuses but not the configurations
- C. performs a complete binary dump of the databases as a sql file
- D. contains all of the configurations
- E. performs a complete binary dump of the database as a .txz file
Answer: D,E
Explanation:
Explanation
File: compressed file in .tar.gz format
https://www.virtual-odyssey.com/2019/10/31/its-the-little-stuff-cisco-ucs-backups/ the file extension for bin in a cisco context is usually the OS.
tar files are used for backup.
https://peazip.github.io/tar-file-format.html
NEW QUESTION # 29
Refer to the exhibit.
Which VLANs are capable to be assigned on vPC interfaces?
- A. 100-103
- B. 100-104
- C. 100-102
- D. 100-105
Answer: D
NEW QUESTION # 30
Drag and drop the NAS and NFS concepts from the left onto the definitions on the right.
Answer:
Explanation:
Explanation:
NFS
Data storage and file sharing requests are sent and received
The protocol is regularly used on Linux segment
NAS
Software is deployed on a lightweight OS that is embedded in the hardware The vendor-agnostic protocol is supported on any hardware and OS
NEW QUESTION # 31
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. Change Interval
- B. No Change Interval
- C. History Count
- D. Change Count
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/ b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_011.html
NEW QUESTION # 32
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A. increased network throughput
- B. increased compression efficiency
- C. GPU acceleration
- D. offline encryption acceleration
Answer: B
NEW QUESTION # 33
Refer to the exhibit.
Which two statements about the routing table of the leaf switch are true? (Choose two.)
- A. 10.20.1.0/24 is a BD subnet in ACI.
- B. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- C. 172.16.100.0/24 is a BD subnet in ACI.
- D. The next hop 10.0.8.65 for route 10.20.1.0/24 is the TEP address of a border leaf in ACI.
- E. The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI.
Answer: A,D
Explanation:
Section: Network
NEW QUESTION # 34
Refer to the exhibit.
Why does the python code for Cisco NX-API print error message?
- A. The JSON is not a supported format for the NX-API.
- B. The "type" is wrong is the body of the request and should be "cli_ conf".
- C. The "type" is wrong in the header of the request and should be "cli_ conf".
- D. NX-API does not allow configuration for features via the requests module.
Answer: B
NEW QUESTION # 35
Refer to the exhibit. What is the outcome of this command when the EPLD is updated on a Cisco Nexus 9000 Series Switch?
- A. displays the impact of the upgrade on the operation of the switch
- B. upgrades the EPLD on the switch disruptively
- C. displays the compatibility of the EPLD upgrade and the image in the bootflash
- D. shows a simulated upgrade of the EPLD
Answer: A
Explanation:
You can use the show install impact epld bootflash: command to determine whether the EPLDs can be upgraded for all the modules or for specific modules on a switch. This command indicates the current EPLD images, new EPLD images, and whether the upgrades would be disruptive to switch operations.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/epld/n9k-epld-rn-
61.html
NEW QUESTION # 36
A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level.
Which two components support specific power limits? (Choose two.)
- A. storage controller
- B. network controller
- C. processor
- D. graphic card
- E. memory
Answer: C,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/4_1/b_Cisco_UCS_C-serie
NEW QUESTION # 37
Due to a newly announced security advisory, a company has been Informed that they must update the configuration of 500 network devices that ate deployed n their network. The engineering team must assist the operations team to prepare for this update. The operations team does not have direct access to the network devices and must log in via a Linux server. This Is the first time that the team is making a network-wide configuration and must change all devices without first installing additional software on the network devices.
The operations team is unfamiliar with automation and scripting technologies. Which automation tool must be used to accomplish this goal?
- A. Puppet
- B. Chef
- C. Saltstack
- D. Ansible
Answer: D
Explanation:
Ansible is known for its agentless architecture, which means it does not require any software to be installed on the target devices. It can manage the devices using SSH, which is typically available on most Linux servers. This makes it suitable for scenarios where the operations team needs to update configurations across a large number of devices without direct access1.
References := For more information on how Ansible works and its capabilities for network automation, you can refer to the official Ansible documentation and resources available on the Ansible website1. These resources provide detailed guidance on using Ansible for network automation tasks, including configuration updates and management.
NEW QUESTION # 38
A company provides applications and database hosting services to multiple customers using isolated infrastructure-as-a-service services within the same data center environment. The environment is based on Cisco MDS 9000 Series Switches. The requirement is to manage the environment by using Fibre Channel Security Protocol and to enable user authentication when the centralized AAA server is unreachable All communication between the MDS switches and the remote servers must be encrypted. Which command set must be used to meet these requirements?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 39
What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment?
- A. SSH
- B. XML management interface
- C. NX-API
- D. Open Agent Container
Answer: C
Explanation:
Explanation
https://docs.ansible.com/ansible/2.5/modules/nxos_nxapi_module.html
https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html
NEW QUESTION # 40
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes. What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)
- A. performs a complete binary dump of the database as a bin file
- B. contains all of the runtime states and statuses but not the configurations
- C. performs a complete binary dump of the databases as a sql file
- D. contains all of the configurations
- E. performs a complete binary dump of the database as a .txz file
Answer: D,E
Explanation:
File: compressed file in .tar.gz format
https://www.virtual-odyssey.com/2019/10/31/its-the-little-stuff-cisco-ucs-backups/ the file extension for bin in a cisco context is usually the OS.
tar files are used for backup.
https://peazip.github.io/tar-file-format.html
NEW QUESTION # 41
An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements Switch1 must retain the primary role if switch2 goes offline Switch1 must retain the primary role until normal conditions are restored.
Switch1 and switch2 must ensure that the routing tables are converged before taking the active role switch2 must retain the primary role if the default gateway is not reachable Drag and drop the configuration commands from the right to the left to meet the requirements. The commands are used more than once Not all commands are used
Answer:
Explanation:
NEW QUESTION # 42
......
Latest Cisco 350-601 Dumps with Test Engine and PDF (New Questions): https://www.torrentvce.com/350-601-valid-vce-collection.html
Pass Your 350-601 Exam Easily - Real 350-601 Practice Dump Updated: https://drive.google.com/open?id=1gbBnUbX3TFljct1GwhVsr4WnCCOETSjH