Quickly and Easily Pass Fortinet Exam with NSE7_OTS-7.2 real Dumps Updated on Nov-2024
Realistic NSE7_OTS-7.2 Dumps Questions To Gain Brilliant Result
Fortinet NSE7_OTS-7.2 exam is a challenging test that requires a significant amount of preparation and study. However, the rewards of passing NSE7_OTS-7.2 exam are significant. Not only will successful candidates have the skills they need to protect their organizations from cyber threats, but they will also have a respected certification that demonstrates their expertise in the field of OT security.
Fortinet NSE7_OTS-7.2 certification exam is a highly respected and sought-after certification in the field of cybersecurity. NSE7_OTS-7.2 exam is designed to test an individual's knowledge and skills in the area of operational technology (OT) security. Fortinet NSE 7 - OT Security 7.2 certification is offered by Fortinet, a leading provider of cybersecurity solutions and services.
Fortinet NSE7_OTS-7.2 (Fortinet NSE 7 - OT Security 7.2) Certification Exam is a challenging and comprehensive exam that validates the candidate's expertise in securing OT networks against cyber threats. Fortinet NSE 7 - OT Security 7.2 certification is highly regarded in the cybersecurity industry and is ideal for professionals who want to advance their careers in securing critical infrastructure networks.
NEW QUESTION # 32
Refer to the exhibit. An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM analytics report
- B. A FortiSIEM CMDB report
- C. A FortiSIEM incident report
- D. A FortiAnalyzer device report
Answer: B
NEW QUESTION # 33
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiEDR for endpoint detection
- B. FortiNAC for network access control
- C. FortiGate for application control and IPS
- D. FortiGate for SD-WAN
- E. FortiSIEM for security incident and event management
Answer: A,B,C
NEW QUESTION # 34
Refer to the exhibit.
In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
- B. Set a software switch on FortiGate to handle inter-VLAN traffic.
- C. Set a unique forward domain on each interface on the network.
- D. Set FortiGate to operate in transparent mode.
Answer: A
NEW QUESTION # 35
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Direct VLAN assignment
- B. Adapter consolidation for multi-adapter hosts
- C. Enhanced point of connection details
- D. Importation and classification of hosts
Answer: C,D
Explanation:
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 36
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiManager
- B. FortiGate
- C. FortiSIEM
- D. FortiNAC
- E. FortiAnalyzer
Answer: B,C,D
Explanation:
Explanation
A: FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
D: FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
E: FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
NEW QUESTION # 37
Refer to the exhibit. In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
- B. Set a software switch on FortiGate to handle inter-VLAN traffic.
- C. Set a unique forward domain on each interface on the network.
- D. Set FortiGate to operate in transparent mode.
Answer: A
NEW QUESTION # 38
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- B. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- C. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
- D. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
Answer: A
NEW QUESTION # 39
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Direct VLAN assignment
- B. Adapter consolidation for multi-adapter hosts
- C. Enhanced point of connection details
- D. Importation and classification of hosts
Answer: C,D
Explanation:
Explanation
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 40
A FortiGate device is newly deployed as the edge gateway of an OT network security fabric. The downstream FortiGate devices are also newly deployed as Security Fabric leafs to protect the control area zone.
With no additional essential networking devices, and to implement micro-segmentation on this OT network, what configuration must the OT network architect apply to control intra-VLAN traffic?
- A. Enable transparent mode on the edge FortiGate device.
- B. Create a software switch on each downstream FortiGate device.
- C. Enable security profiles on all interfaces connected in the control area zone.
- D. Set up VPN tunnels between downstream and edge FortiGate devices.
Answer: D
NEW QUESTION # 41
Refer to the exhibit. The IPS profile is added on all of the security policies on FortiGate. For an OT network, which statement of the IPS profile is true?
- A. The listed IPS signatures are classified as SCADAapphcat nns
- B. The IPS profile inspects only traffic originating from SCADA equipment.
- C. FortiGate has no IPS industrial signature database enabled.
- D. All IPS signatures are overridden and must block traffic match signature patterns.
Answer: A
NEW QUESTION # 42
An OT network consists of multiple FortiGate devices. The edge FortiGate device is deployed as the secure gateway and is only allowing remote operators to access the ICS networks on site.
Management hires a third-party company to conduct health and safety on site. The third-party company must have outbound access to external resources.
As the OT network administrator, what is the best scenario to provide external access to the third-party company while continuing to secure the ICS networks?
- A. Implement an additional firewall using an additional upstream link to the internet.
- B. Create VPN tunnels between downstream FortiGate devices and the edge FortiGate to protect ICS network traffic.
- C. Configure outbound security policies with limited active authentication users of the third-party company.
- D. Split the edge FortiGate device into multiple logical devices to allocate an independent VDOM for the third-party company.
Answer: D
NEW QUESTION # 43
Refer to the exhibit. You are navigating through FortiSIEM in an OT network. How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
Answer: C
NEW QUESTION # 44
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. Rogue devices, only when they connect for the first time
- B. Rogue devices, each time they connect
- C. All connected devices, each time they connect
- D. Known trusted devices, each time they change location
Answer: A
NEW QUESTION # 45
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- B. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- C. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- D. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
Answer: C
NEW QUESTION # 46
An OT customer is using multiple FortiGate devices in their network to implement two-factor authentication with hardware FortiTokens. A supervisor is carrying multiple FortiTokens to be used when logging in to a critical server behind different FortiGate devices.
As an OT network architect, which approach must you take in order to assign one token per user and still use two-factor authentication on multiple FortiGate devices?
- A. Provision the Edge-FortiGate device with all the FortiTokens and configure it as a remote authentication server on other FortiGate devices.
- B. Implement FortiAuthenticator with FortiTokens provisioned for each user, and configure FortiAuthenticator as remote authentication server on all FortiGate devices in the OT network.
- C. Implement a FortiManager and manage all FortiGate devices in the OT network to share the FortiTokens database.
- D. Configure FSSO-based two-factor authentication.
Answer: B
NEW QUESTION # 47
......
Start your NSE7_OTS-7.2 Exam Questions Preparation: https://www.torrentvce.com/NSE7_OTS-7.2-valid-vce-collection.html
A Fully Updated NSE7_OTS-7.2 Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=110l4TnTwwrrQEwtecYmB6OnXcYSlt3R7