[Q33-Q53] 2023 Updated NCM-MCI-5.20 Tests Engine pdf - All Free Dumps Guaranteed!

Share

2023 Updated NCM-MCI-5.20 Tests Engine pdf - All Free Dumps Guaranteed!

Latest NCM-MCI NCM-MCI-5.20 Actual Free Exam Questions


Nutanix NCM-MCI-5.20 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Configure security to leverage external authentication
  • authorization resources
  • Given a scenario, secure workloads
Topic 2
  • Given a scenario, troubleshoot network visualizations
  • Configure networking for optimal performance
Topic 3
  • Configure network segmentation
  • Given a scenario, migrate workloads
Topic 4
  • Given a scenario, troubleshoot connectivity issues
  • Configure security for Nutanix Enterprise Clouds
Topic 5
  • Given a scenario, implement Nutanix Volumes
  • Given a scenario, implement Nutanix Files
Topic 6
  • Evaluate Capacity Runways to predict growth
  • Given a scenario, maintain Nutanix cluster health
Topic 7
  • Given a scenario, troubleshoot issues using alerts and
  • or logs
  • Given a scenario, upgrade firmware

 

NEW QUESTION 33
An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts.
Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?

  • A. Fiber Channel
  • B. NFS
  • C. iSCSI
  • D. SMB/CIFS

Answer: C

 

NEW QUESTION 34
An administrator needs to maximize storage potential in a six-node cluster. The container is configured with the following:
Post-process compression
Capacity deduplication
What should the administrator configure to increase space savings?

  • A. Inline compression
  • B. Cache dedupe
  • C. Erasure coding
  • D. Reserve capacity

Answer: C

 

NEW QUESTION 35
What is the minimum number of blocks required to utilize block awareness?

  • A. 0
  • B. 1
  • C. 2

Answer: C

 

NEW QUESTION 36
A customer has a four-node cluster and is using Volume Groups to provide storage services to a SQL cluster.
In the event of a CVM failure in the cluster, what is the expected IO path of the volume group's iSCSI targets?

  • A. vDisk directed to CVM that failed to disconnect and will not reconnect without manual intervention
  • B. vDisk directed at failure CVM are redirected to Data Services IP until CVM is reconnected
  • C. vDisk directed at failed CVM will disconnect and reconnect when the failed CVM comes back online
  • D. vDisk directed to failed CVM are redirected to another CVM and automatically reconnect

Answer: D

 

NEW QUESTION 37
Which two access protocols are supported by Files? (Choose two.)

  • A. NFS
  • B. FCOE
  • C. SMB
  • D. ISCSI

Answer: A,C

 

NEW QUESTION 38
An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.
Which action should the administrator perform?

  • A. Use VMware Converter
  • B. Use Nutanix one-click cluster conversion from ESXi to AHV
  • C. Use storage live migration
  • D. Use Cross Hypervisor DR to replicate VMs from ESXi to AHV

Answer: B

 

NEW QUESTION 39
Refer to the exhibit.

A Microsoft SQL 2016 deployment is shown in the exhibit. The administrator receives user reports that database queries take too long to return.
Which optimization should be made to this configuration to improve performance?

  • A. Add a second SCSI controller for the Database.
  • B. Combine both of the OS and SQL Binaries disks
  • C. Configure the VM to use a PCI disk controller
  • D. TempDB, and Logs disk Separate the Database. TempDB, and Logs onto their own disks

Answer: D

 

NEW QUESTION 40
Nutanix Support Asked an administrator to provide AHV logs to help solve a support request.
Which task should be performed to provide log files to the support team?

  • A. collect logs from the health Page
  • B. Upload log files from /home/nutanix/data/logs folder
  • C. Run NCC Check from the command line
  • D. Enable Pulse to include additional support information

Answer: C

 

NEW QUESTION 41
Which Windows technology does AHV support to prevent authentication theft?

  • A. Azure AD Multi-Factor
  • B. Endpoint Manager
  • C. Active Directory federation Services
  • D. Windows Defender Credential Guard

Answer: C

 

NEW QUESTION 42
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?

  • A. Compression, Deduplication, and Erasure Coding
  • B. Compression only
  • C. Deduplication and Erasure Coding
  • D. Compression and Deduplication

Answer: C

Explanation:
Reference:

 

NEW QUESTION 43
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?

  • A. Expand the cluster to 48 nodes distributed evenly across 6 racks
  • B. Expand the cluster to 50 nodes distributed evenly across 5 racks
  • C. Expand the cluster to 60 nodes distributed evenly across 6 racks
  • D. Expand the cluster to 40 nodes distributed evenly across 5 racks

Answer: C

 

NEW QUESTION 44
An administrator needs to evaluate if the existing configuration of Protection Domains meets the specified corporate recovery policy for SQL Dat a. The corporate policy requires that all SQL Servers be recoverable at the DR site within 30 minutes, and must result in a maximum of 60 minutes of data loss. SQL data must be required.
The protection domain is configured as follows:
* Application consistent snapshots are enabled
* The SQL server VMs are assigned to the Protection Domain as their own Consistency Group
* The Protection Domain schedule is configured as snapshots taken every 90 minutes from 7 am until 8 pm What must be changed to meet the required policy?

  • A. Revise the schedule to be 30 minutes
  • B. Revise the schedule tc be 15 minutes
  • C. Revise the schedule to be 45 minutes
  • D. Revise the schedule to be 60 minutes

Answer: D

 

NEW QUESTION 45
An administrator needs to deploy an application with a large amount of data connected via Nutanix Volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)

  • A. Enable thick provisioning on the Volume Group(s)
  • B. Use multiple subnets for iSCSI traffic
  • C. Distribute workload across multiple virtual disks
  • D. Enable RSS (Receive Side Scaling)

Answer: C,D

Explanation:

 

NEW QUESTION 46
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?

  • A. Hard
  • B. External
  • C. Internal
  • D. Soft

Answer: D

Explanation:

 

NEW QUESTION 47
A VM is exhibiting one or more of the following baseline values based on the past 30 days:
* CPU usage < 20%
* CPU ready time < 5%
* Memory usage < 50% (moderately) or < 20% (severely)
* Memory swap rate = 0 Kbps
Which type of VM is being described?

  • A. Inactive VM
  • B. Over-Provisioned VM
  • C. Constrained VM
  • D. Bully VM

Answer: B

Explanation:

 

NEW QUESTION 48
An administrator receives reports about a Nutanix environment. The investigation finds the following;
* VMs are experiencing very high latency
* Each node is equipped with a single SSD, utilized at 95%
* Each node is equipped with three HDDs, utilized at 40%
Why are the guest VMs experiencing high latency?

  • A. CVMs are overwhelmed by disk balancing operations.
  • B. All VM write operations are going to HDD.
  • C. VMs are unable to perform write operations.
  • D. All VM read operations are coming from HDD.

Answer: D

 

NEW QUESTION 49
An administrator is concerned that Prism will be inaccessible if Active Directory is unable to process logins. Which method should the administrator use to access the cluster in the event of this type of outage?

  • A. Manage the cluster by using the "nutanix" user on the Prism leader CVM
  • B. Create and use an emergency local account on the cluster
  • C. Manage the cluster remotely by downloading ncli to a remote workstation
  • D. Deploy an Active Directory server locally on the cluster

Answer: B

 

NEW QUESTION 50
An administrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in the volume group have gone offline.
What is causing this issue?

  • A. A CVM serving the Volume Group has gone offline.
  • B. Port 9443 is blocked in the server firewall.
  • C. The Volume Group Load Balancer has been disabled.
  • D. Port 3260 has been blocked in the server firewall.

Answer: A

 

NEW QUESTION 51
Which statement best defines Replication factor 2 (RF2 ) ?

  • A. Data Will be written locally, and a second copy to another disk group
  • B. Data will be written locally, and a second copy goes to a remote site.
  • C. Data will be written locally, and a second copy goes to another node in the same cluster
  • D. data will be written locally and a second copy then will be replicated to another cluster

Answer: C

 

NEW QUESTION 52
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at 15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected 5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?

  • A. Utilize Metro Availability to meet this requirement
  • B. Change the protection domain to use Async DR
  • C. Configure the protection domain to take snapshots on 15-minute intervals
  • D. Fix a connectivity issue because the protection domain reverted to Async

Answer: D

 

NEW QUESTION 53
......

NCM-MCI-5.20 Dumps Updated Practice Test and 166 unique questions: https://www.torrentvce.com/NCM-MCI-5.20-valid-vce-collection.html

Latest 100% Exam Passing Ratio - NCM-MCI-5.20 Dumps PDF: https://drive.google.com/open?id=1Wh14I88A7H1aU0tRNSob9DxnJiQZBsJ4