Pass Guaranteed Quiz 2023 Realistic Verified Free JN0-363 Exam Dumps
Free JNCIS-SP JN0-363 Ultimate Study Guide (Updated 265 Questions)
Juniper JN0-363 Exam Topics:
| Section | Objectives |
|---|---|
| Tunnels | - Identify the concepts, requirements, or functionality of IP tunneling:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IP tunnels:
|
| Open Shortest Path First (OSPF) | - Identify the concepts, operation, or functionality of OSPF:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF:
|
| IPv6 | - Identify the concepts, operation, or functionality of IPv6:
- Demonstrate knowledge of how to configure, monitor, or troubleshooting IPv6:
|
| Intermediate System to Intermediate System (IS-IS) | - Identify the concepts, operation, or functionality of IS-IS:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS:
|
| Spanning-Tree Protocols | - Identify the concepts, benefits, operation, or functionality of Spanning Tree Protocol and its variants:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot STP and its variants:
|
| Border Gateway Protocol (BGP) | - Identify the concepts, operation, or functionality of BGP:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP:
|
| Multiprotocol Label Switching (MPLS) | - Identify the concepts, operation, or functionality of MPLS:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS:
|
NEW QUESTION 70
Which two statements are correct about IS-IS? (Choose two.)
- A. A level 1 only router can form an adjacency with a level 2 only router.
- B. For level 2 adjacencies, the area IDs must be the same.
- C. A level 1 only router can never form an adjacency with a level 2 only router.
- D. For level 2 adjacencies, the area IDs can be different.
Answer: A,B
NEW QUESTION 71
Which statement describes integrated routing and bridging (IRB) interfaces?
- A. An IRB interface defines a bridge domain.
- B. An IRB interface Is an IP gateway For hosts of a bridge domain.
- C. An IRB interface assigns interfaces to VLANs.
- D. An IRB interface enables Layer 2 switching on the router.
Answer: D
NEW QUESTION 72
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)
- A. show route receive-protocol bgp 192.168.1.1
- B. show route advertising-protocol bgp 192.168.1.1
- C. show route protocol bgp hidden
- D. show route bgp
Answer: A,C
NEW QUESTION 73
What is the purpose of STP BPDUs?
- A. to determine the least cost path
- B. to exchange MAC addresses
- C. to determine the root-alternate port
- D. to determine the root bridge
Answer: A
NEW QUESTION 74
Click the Exhibit.
Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?
- A. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
- B. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
- C. 100.0.1/32 and 100.0.20.1/32
- D. 100.0.20.1/32
Answer: B
NEW QUESTION 75
Which two statements are true when configuring OSPF authentication? (Choose two.)
- A. If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.
- B. An MD5 password requires a key ID.
- C. An OSPF link can support both simple password and MD5 authentication at the same time.
- D. You can configure multiple MD5 passwords simultaneously on the same link.
Answer: B,D
NEW QUESTION 76
In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the interface's MAC address is 12:34:ab:cd:ef:56?
- A. fe8::1234:abff:fecd:ef56/64
- B. fec0::1234:abff:fecd:ef56/64
- C. fe80::1234:abcd:ef56/64
- D. fe80::1234:abff:fecd:ef56/64
Answer: C
NEW QUESTION 77
Which two statements are correct about the way that BGP propagates routes by default? (Choose two.)
- A. A route learned by IBGP will not be re-advertised lo IBGP peers.
- B. A route learned by EBGP will not be re-advertised to IBGP peers.
- C. A route learned by IBGP will be re-advertised to IBGP peers.
- D. A route learned by EBGP will be re-advertised to IBGP peers.
Answer: B,C
NEW QUESTION 78
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. Root protection
- B. BPDU protection
- C. Loop protection
- D. MAC movement protection
Answer: C
NEW QUESTION 79
Which two statements correctly describe the BGP community attribute? (Choose two.)
- A. Multiple communities can be associated with a route.
- B. Only one community can be associated with a route.
- C. The community attributes is an optional transitive attribute.
- D. The community attribute is an optional nontransitive attribute.
Answer: A,C
NEW QUESTION 80
Click the Exhibit.
Referring to the exhibit, what is the correct OSPF interface state for the ge-0/0/1 interface?
- A. DR
- B. DRother
- C. BDR
- D. Down
Answer: A
NEW QUESTION 81
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Routers A and C only
- B. BGP routes learned from Router E only
- C. BGP routes learned from Router A only
- D. BGP routes learned from Routers A, C and E only
Answer: D
NEW QUESTION 82
You want to make use of the nonstop active routing (NSR) feature.
Which complementary feature must also be enabled?
- A. Virtual Router Redundancy Protocol
- B. IP anycast
- C. graceful Routing Engine switchover
- D. graceful restart
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/nsr-overview.html
NEW QUESTION 83
Exhibit
You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
- A. set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0
- B. set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255
- C. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type p2p
- D. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma
Answer: B
NEW QUESTION 84
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- D. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
Answer: A
NEW QUESTION 85
......
Juniper JN0-363 Exam Certification Details:
| Exam Name | Service Provider Routing and Switching Specialist |
| Exam Price | $300 USD |
| Duration | 90 minutes |
| Number of Questions | 65 |
| Sample Questions | Juniper JN0-363 Sample Questions |
| Passing Score | Pass / Fail (60-70% Approx.) |
| Exam Registration | PEARSON VUE |
Get to the Top with JN0-363 Practice Exam Questions: https://www.torrentvce.com/JN0-363-valid-vce-collection.html
Use Real JN0-363 Dumps Free Sample Questions and Practice Test Engine: https://drive.google.com/open?id=1gLRcXjBwOESw-UdCYbXcOcRbobi9Q5UJ