[Oct 10, 2024] 300-610 Free Exam Questions with Quality Guaranteed
300-610 Free Exam Files Downloaded Instantly
To prepare for the Cisco 300-610 exam, candidates can take advantage of a variety of study materials, including official Cisco training courses, practice exams, and study guides. Cisco also offers a range of online resources, including webinars, whitepapers, and technical documentation, to help candidates prepare for the exam. Additionally, candidates can participate in online communities and forums to connect with other professionals and share knowledge and experiences.
Cisco 300-610 exam is a 90-minute exam that consists of 60-70 questions. 300-610 exam is designed to measure the candidate's knowledge of data center infrastructure design, including the ability to design solutions that meet the business requirements of an organization. 300-610 exam is also designed to measure the candidate's ability to use Cisco technologies to design and implement data center infrastructure solutions.
NEW QUESTION # 15
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
- A. MACsec
- B. L2TPv3
- C. L2TPv2
- D. IPsec
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf
NEW QUESTION # 16
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. Ethernet Adapter
- B. vNIC Policy
- C. Pin Group Policy
- D. Network Control Policy
- E. vNIC Template Policy
Answer: D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION # 17
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.
Which solution meets these requirements?
- A. 1) Assign a separate VDC for the testing and development environments.
2. Place a firewall between the VDCs. - B. 1) Enable new routing instances for the testing and development environments in the same VDC.
2) Control reachability by using firewall access policies. - C. 1) Create a VRF for the testing and development environments.
2) Use ACLs to control traffic between the two environments. - D. 1) Create a separate VRF for the testing and development environments.
2) Control reachability by using firewall access policies.
Answer: A
NEW QUESTION # 18
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. potential data loss
- B. reduction in application performance
- C. specific backup requirements
- D. distance limitations
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference:
Reference: https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous- replication-vs-asynchronous-replication/
NEW QUESTION # 19
An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.
The port should support management over IP.
Which port type must be used to meet these requirements?
- A. console port
- B. Ethernet port
- C. management port
- D. connectivity management port
Answer: A
NEW QUESTION # 20
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Updating
- B. Secondary
- C. Primary
- D. Initial
Answer: D
Explanation:
Section: Automation Design
NEW QUESTION # 21
An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location. The design must consider these customer requirements:
a large-scale cluster with eight or more nodes
distributed high-performance file system for virtualized servers
high fault tolerance to multiple node failures
Which action meets these objectives?
- A. Enable logical availability zones.
- B. Implement a replication factor of four.
- C. Configure data destaging and deduplication
- D. Create multiple datastores for storage of VM.
Answer: C
NEW QUESTION # 22
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)
- A. vPC
- B. 802.1q
- C. FEX
- D. VSS
- E. HSRP
Answer: A,D
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series- switches/C07-572835-00_NX-OS_vPC_DG.pdf
NEW QUESTION # 23
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications.
Which action should be implemented for the Fibre Channel traffic from the vHBA of this server to pass through the I/O Module in the Cisco UCS chassis to a specified uplink Fibre Channel port?
- A. Update the applied global QoS policy.
- B. Update the applied Fibre Channel adapter policy.
- C. Include a SAN pin group in the vHBA policy.
- D. Enable Persistent Binding in the vHBA policy.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User- Guides/Storage-Mgmt/3-
2/b_UCSM_GUI_Storage_Management_Guide_3_2/b_UCSM_GUI_Storage_Management_Guid e_3_ 2_chapter_0110.pdf
NEW QUESTION # 24
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?
- A. end host
- B. switch
- C. NPIV
- D. Fibre Channel
Answer: B
NEW QUESTION # 25
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
- A. Create VRF-aware software infrastructure interfaces.
- B. Create a policy map in the default VDC that routes traffic between the VDCs.
- C. Create interfaces in the VDC that can be accessed by another VDC.
- D. Connect the VDCs to an external Layer 3 device.
- E. Cross-connect the ports between the VDCs.
Answer: B,D
Explanation:
The Cisco NX-OS software does not support direct communication between VDCs on a single physical device. You must make a physical connection from a port allocated to one VDC to a port allocated to the other VDC to allow the VDCs to communicate.
NEW QUESTION # 26
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. maintains single control plane
- B. uses all available uplink bandwidth
- C. no spanning-tree blocked ports
- D. disables spanning-tree
- E. supports Layer 3 port channels
Answer: B,C
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/ vpc_best_practices_design_guide.pdf
NEW QUESTION # 27
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. NPV feature on the Cisco MDS Series.
- B. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. end-host mode feature on the Cisco UCS Fabric Interconnects
- E. NPIV feature on the Cisco MDS Series
Answer: A,E
NEW QUESTION # 28
A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design.
Which deployment model meets these requirements?
- A. single-sided dual vPC
- B. single-sided single vPC
- C. dual-sided single vPC
- D. dual-sided dual vPC
Answer: D
NEW QUESTION # 29
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
- B. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
- C. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
- D. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
Answer: B
Explanation:
1, 2, 4, and 8 Gb Fibre Channel all use 8b/10b encoding. Meaning, 8 bits of data gets encoded into 10 bits of transmitted information - the two bits are used for data integrity. Well, if the link is
8Gb, how much do we actually get to use for data - given that 2 out of every 10 bits aren't "user" data? FC link speeds are somewhat of an anomaly, given that they're actually faster than the stated link speed would suggest. Original 1Gb FC is actually 1.0625Gb/s, and each generation has kept this standard and multiplied it. 8Gb FC would be 8×1.0625, or actual bandwidth of
8.5Gb/s. 8.5*.80 = 6.8. 6.8Gb of usable bandwidth on an 8Gb FC link.
10GE (and 10G FC, for that matter) uses 64b/66b encoding. For every 64 bits of data, only 2 bits are used for integrity checks. While theoretically this lowers the overall protection of the data, and increases the amount of data discarded in case of failure, that actual number of data units that are discarded due to failing serialization/deserialization is minuscule. For a 10Gb link using
64b/66b encoding, that leaves 96.96% of the bandwidth for user data, or 9.7Gb/s.
NEW QUESTION # 30
An engineer seeks a solution to retrieve routing information from Cisco Nexus switches. The data must be exported to a web application in a JSON or XML data format for monitoring and must be encrypted during transmission. The solution must not require extensive knowledge to support and should be simple to implement.
Which technology accomplishes these goals?
- A. NX-API
- B. streaming telemetry
- C. Python scripts
- D. Cisco Tetration
Answer: B
NEW QUESTION # 31
An engineer must design a disaster recovery solution for a Cisco ACI Multi-Site network. One requirement is that the applications must have seamless IP addressing across sites.
The solution must also be highly resilient and support Layer 2 adjacency.
Which design meets these requirements?
- A. stretched bridge domain, subnet, and EPG
localized Layer 2 broadcast flooding - B. localized bridge domain, subnet, and EPG
stretched Layer 2 broadcast domain - C. localized bridge domain with local subnet
localized Layer 2 broadcast flooding - D. stretched bridge domain with local subnet
stretched Layer 2 broadcast domain
Answer: C
NEW QUESTION # 32
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION # 33
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. NPV feature on the Cisco MDS Series.
- B. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. end-host mode feature on the Cisco UCS Fabric Interconnects
- E. NPIV feature on the Cisco MDS Series
Answer: A,E
NEW QUESTION # 34
An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location. The design must consider these customer requirements:
* a large-scale cluster with eight or more nodes
* distributed high-performance file system for virtualized servers
* high fault tolerance to multiple node failures
Which action meets these objectives?
- A. Configure data destaging and deduplication
- B. Enable logical availability zones.
- C. Create multiple datastores for storage of VM.
- D. Implement a replication factor of four.
Answer: D
NEW QUESTION # 35
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-pod over MP-BGP EVPN
- B. Multi-pod over OSPF EVPN
- C. Multi-cloud
- D. Multi-site
Answer: D
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION # 36
Refer to the exhibit. A system administrator needs a solution to manage random packet drops between two Cisco UCS C240 M4 servers. The servers are connected to a pair of Cisco Nexus
7009 switches using 10G fibre interfaces Both servers are generating too many east-west traffic flows from TCP-based applications which causes significant latency that impacts the customer.
Also the transfer of files from Server-1 to Server-2 larger than 10 GB results in multiple retransmits. Which design solution resolves this issue?
- A. Apply rate-limit on the server 1 VLAN interface per application flow.
- B. Add a second uplink to each server NIC
- C. Increase the amount of memory m both servers
- D. Connect both servers m the same VLAN
Answer: D
NEW QUESTION # 37
An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant. Which solution meets these requirements?
- A. vPC
- B. VRF
- C. CFS
- D. VDC
Answer: D
NEW QUESTION # 38
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- C. A separate DSCP value must be configured for all FCIP VSAN traffic.
- D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
Answer: A
NEW QUESTION # 39
......
Q&As with Explanations Verified & Correct Answers: https://www.torrentvce.com/300-610-valid-vce-collection.html
Practice Exams and Training Solutions for Certifications: https://drive.google.com/open?id=1j3nu6UT-wNrAcfUlmjt2VSTP6K1gMBZs