NSE5_FAZ-7.2 Training & Certification Get Latest NSE 5 Network Security Analyst Updated on Oct 25, 2023
Certification Training for NSE5_FAZ-7.2 Exam Dumps Test Engine
Preparing for the Fortinet NSE5_FAZ-7.2 exam requires a solid understanding of FortiAnalyzer and its functionalities. Candidates are encouraged to read the official FortiAnalyzer 7.2 documentation, attend training courses, and gain practical experience working with FortiAnalyzer. NSE5_FAZ-7.2 exam consists of 35 multiple-choice questions that must be completed within 60 minutes. Candidates must score at least 70% to pass the exam.
NEW QUESTION # 31
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network security?
- A. Incidents dashboards
- B. Threat hunting
- C. Outbreak alert services
- D. FortiView Monitor
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 217: Threat hunting consists in proactively searching for suspicious or potentially risky network activity in your environment. The proactive approach will help administrator find any threats that might have eluded detection by the current security solutions or configurations.
NEW QUESTION # 32
Refer to the exhibit.
The exhibit shows "remoteservergroup" is an authentication server group with LDAP and RADIUS servers.
Which two statements express the significance of enabling "Match all users on remote server" when configuring a new administrator? (Choose two.)
- A. Use remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at anytime.
- B. It allows administrators to use two-factor authentication.
- C. It creates a wildcard administrator using LDAP and RADIUS servers.
- D. Administrator can log in to FortiAnalyzer using their credentials on remote servers LDAP and RADIUS.
Answer: C,D
NEW QUESTION # 33
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?
- A. Log fetching
- B. Indicators of Compromise
- C. Log upload
- D. Log forwarding an aggregation mode
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management
NEW QUESTION # 34
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To use real-time forwarding
- B. To properly correlate logs
- C. To improve DNS response times
- D. To resolve host names
Answer: B
NEW QUESTION # 35
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?
- A. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
- B. FortiAnalyzer flags the associated host for further analysis.
- C. The detection engine classifies those logs as Suspicious
- D. A new Infected entry is added for the corresponding endpoint.
Answer: A
NEW QUESTION # 36
A play book contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed. What will be the status of the playbook after its execution?
- A. Running
- B. Upstream_failed
- C. Success
- D. Failed
Answer: D
Explanation:
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. FortiAnalyzer_7.0_Study Guide page No: 247 Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. A failed status, however, does not mean that all tasks failed. Some individual actions may have been completed successfully.
NEW QUESTION # 37
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.)
- A. The generation time for reports is decreased.
- B. When new logs are received, the hard-cache data is updated automatically.
- C. The size of newly generated reports is optimized to conserve disk space.
- D. FortiAnalyzer local cache is used to store generated reports.
Answer: A,B
NEW QUESTION # 38
What is the purpose of a dataset query in FortiAnalyzer?
- A. It injects log data into the database
- B. It retrieves log data from the database
- C. It sorts log data into tables
- D. It extracts the database schema
Answer: B
NEW QUESTION # 39
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)
- A. IPsec is only enabled through the CLI on FortiAnalyzer.
- B. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
- C. Must establish an IPsec tunnel ID and pre-shared key.
- D. IPsec cannot be enabled if SSL is enabled as well.
Answer: A,C
Explanation:
Option B is correct because you must establish an IPsec tunnel ID and pre-shared key to secure the communication between FortiAnalyzer and FortiGate with IPsec12. The tunnel ID is a unique identifier for each tunnel and the pre-shared key is a secret passphrase that authenticates the peers.
Option D is correct because IPsec is only enabled through the CLI on FortiAnalyzer1. You cannot configure IPsec settings through the GUI on FortiAnalyzer.
NEW QUESTION # 40
What are two benefits of using fabric connectors? (Choose two.)
- A. Fabric connectors allow you to improve redundancy.
- B. You do not need an additional license to send logs to the cloud platform.
- C. Using fabric connectors is more efficient than using third-party polling with API.
- D. They allow FortiAnalyzer to send logs in real-time to public cloud accounts.
Answer: A,D
NEW QUESTION # 41
If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected?
- A. The configured priority is checked first
- B. The configured IP address is checked first.
- C. The active port number is checked first.
- D. The firmware version is checked first.
Answer: A
Explanation:
In the case of a primary device failure, FortiAnalyzer HA uses the following rules to select a new primary:
* All cluster devices are assigned a priority from 80 to 120. The default priority is 100. If the primary device becomes unavailable, the device with the highest priority is selected as the new primary device. For example, a device with a priority of 110 is selected over a device with a priority of 100.
* If multiple devices have the same priority, the device whose primary IP address has the greatest value is selected as the new primary device. For example, 123.45.67.124 is selected over 123.45.67.123.
* If a new device with a higher priority or a greater value IP address joins the cluster, the new device does not replace (or pre-empt) the current primary device automatically.
FortiAnalyzer_7.0_Study_Guide-Online page 62
NEW QUESTION # 42
Which two purposes does the auto cache setting on reports serve? (Choose two.)
- A. It provides diagnostics on report generation time.
- B. It automatically updates the hcache when new logs arrive.
- C. It reduces report generation time.
- D. It reduces the log insert lag rate.
Answer: B,C
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/384416/how-auto-cache-works
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/86926/enabling-auto-cache
NEW QUESTION # 43
Which tabs do not appear when FortiAnalyzer is operating in Collector mode?
- A. Event Management
- B. Device Manger
- C. FortiView
- D. Reporting
Answer: A
NEW QUESTION # 44
Which two statements express the advantages of grouping similar reports? (Choose two.)
- A. Reduce the number of hcache tables and improve auto-hcache completion time.
- B. Improve report completion time.
- C. Provides a better summary of reports.
- D. Conserve disk space on FortiAnalyzer by grouping multiple similar reports.
Answer: A,B
NEW QUESTION # 45
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
- A. Service provider
- B. Identity provider
- C. Identity collector
- D. Principal
Answer: A,B
Explanation:
Reference:
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/981386/saml-admin-authentication In FortiAnalyzer, SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator by means of single sign-on (SSO).
FortiAnalyzer can play the role of the identity provider (IdP), the service provider (SP), or Fabric SP, when an external identity provider is available.
FortiAnalyzer_7.0_Study_Guide-Online pag. 48
NEW QUESTION # 46
What must you consider when using log fetching? (Choose two.)
- A. The archive logs retrieved from the server become archive logs in the client.
- B. The fetching profile must include a user with the Super_User profile.
- C. The fetch client can retrieve logs from devices that are not added to its local Device Manager
- D. You can use filters to include only logs from a single device.
Answer: B,D
NEW QUESTION # 47
When working with FortiAnalyzer reports, what is the purpose of a dataset?
- A. To define the chart type to be used
- B. To provide the layout used for reports
- C. To retrieve data from the database
- D. To set the data included in templates
Answer: C
Explanation:
Reference:
Datasets: Structured Query Language (SQL) SELECT queries that extract specific data from the database
NEW QUESTION # 48
......
Step by Step Guide to Prepare for NSE5_FAZ-7.2 Exam: https://www.torrentvce.com/NSE5_FAZ-7.2-valid-vce-collection.html
NSE 5 Network Security Analyst NSE5_FAZ-7.2 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1kh4XUut65DlKrCnzioWeP6UhQUhZ9B4J