NCSE-Core Dumps PDF - NCSE-Core Real Exam Questions Answers [Q22-Q46]

Share

NCSE-Core Dumps PDF - NCSE-Core Real Exam Questions Answers

Get Started: NCSE-Core Exam [2024] Dumps Nutanix PDF Questions

NEW QUESTION # 22
A prospect's business is growing 100% year over year. The prospect is interested in Nutanix for their main datacenter due to the alility to scale quickly and easily. They have three remote sites that will be refreshed within the next year. Each site needs to replicate to their many datacenter. The SE proposes the Nutanix NX line, and the prospect asks to utilize the Xpress line.
For which reason is the Xpress line the wrong choice? (Choose two)

  • A. SX licensing will not support many-to-many- cluster replication
  • B. SX is limited to two 4-node clusters.
  • C. SX is limited to one 4-node cluster.
  • D. SX licensing does not support cluster-to-cluster replication
  • E. SX has a lower services cost for installation.

Answer: A,B


NEW QUESTION # 23
A VDI environment based on AHV Cluster is not performing well. The current environment is using only one bridge (BridgeO). An administrator need to verify if nodes are using all network card associated to BridgeO.
Which two menus should be used to check the current configuration? (Choose two.)

  • A. Host NICs tab in Hardware menu
  • B. Host view in Network menu
  • C. Network Configuration item in Setting menu
  • D. 1.0 Metrics tab VM menu

Answer: B,D


NEW QUESTION # 24
A prospects need to refresh their environment but has a very small budget for the project. Four years after their last infrastructure refresh, the prospect's datacenter is only running at 40% utilization. In addition, they have
25 satellite offices. Each office has a requirement to run 4 to 6 VM's locally.
Which two Nutanix platform capabilities should the SE highlight to address the prospect's concerns? (Choose two)

  • A. Pay as you grow.
  • B. Software only.
  • C. Single node backup.
  • D. Automated data storage tiering.
  • E. Multi-Site Management.

Answer: A,E


NEW QUESTION # 25
A customer asks for a quote for a hybrid cluster to run general purpose VMs and an ERP application. The customer has a vSAN ReadyNode quote already and is looking for a comparable Nutanix solution. They share the following bill of materials: 3 Hosts , 2x E5-2640v4 CPUs , 512GB RAM , 1 x 480GB SSD , 2 x 8TB HDD , 2 x 1GB NIC What are two reasons to avoid sizing to match a competitor's bill of materials ? (Choose two)

  • A. The assumptions made in the competitor's sizing cannot be determined.
  • B. Sizing data from the competition was shared.
  • C. Nutanix Collector is better at capturing the metrics needed
  • D. There is no visibility to the actual customer requirement

Answer: A,D


NEW QUESTION # 26
Which tool could be used to perform a sizing discovery in a general server virtualization environment running both VMware ESXi and Nutanix AHV?

  • A. AWR
  • B. Collector
  • C. RVTools
  • D. MAP

Answer: C


NEW QUESTION # 27
In the event of a primary datacenter failure. a customer wants to power on virtual machines in a secondary datacenter with an RPO and RTO of no more than 15 minutes. Upon further discussions with the customer. the systems engineer (SE) finds that round trip latency between the 2 sites ca reach up to 6ms Which Nutanix feature should the SE recommend?

  • A. Metro Availability
  • B. NearSync
  • C. Rack Awareness
  • D. Fault Tolerance FT1

Answer: B


NEW QUESTION # 28
An SE is performing a sizing exercise for a large financial institution.
They plan to move 8000 VMs to Nutanix AHV manage those clusters using Prism Central.
Which sizing configuration should the SE use for each Prism Central VM?

  • A. 4 vCPU / 16gig MEM /500 gig Storage
  • B. 10 vCPU / 48gig MEM /3500 gig Storage
  • C. 8 vCPU / 32gig MEM /2500 gig Storage
  • D. 2 vCPU / 8gig MEM /200 gig Storage

Answer: C


NEW QUESTION # 29
How should an administrator correct an SSL error when connecting to a Nutanix cluster?

  • A. Add the SSL certificate to the workstation's trusted people store
  • B. Add the SSL certificate to an AD group policy applied to all computer objects
  • C. Create a new SSL certificate for the cluster signed by an AD certificate authority
  • D. Create a new self-signed certificate for the cluster with a 4096 bit key

Answer: C


NEW QUESTION # 30
when reviewing Nutanix cluster upgrades. a customer engineer is concerned that their VM will be forced to repeatedly migrate between nodes. Which Nutanix feature allows VMs to remain on a host during an AOS upgrade?

  • A. Shadow Clones
  • B. CVM Autopathing
  • C. Data Locality
  • D. RF3

Answer: B


NEW QUESTION # 31
One of a prospective customer's security analysts asks about Nutanix's security functionality. The security analyst asks if Nutanix has any feature or capability that reduces the effort required to assess the security with in the Nutanix infrastructure. Which benefit does Nutanix SCMA provide to this prospect?

  • A. Automates security compliance checking and remediation
  • B. Enables One-Click remediation of non-compliant security settings
  • C. Automatically updates/patches cluster components to the latest code levels
  • D. Notifies the customer of newly discovered/announced vulnerabilities

Answer: A


NEW QUESTION # 32
A customer recently deployed Nutanix for VDI workloads and determine AFS is suitable for their departmental shares. They ask about infrastructure requirements providing the following file workloads specifics:
* 11.8 TB of data.
* 360000 files.
* 2400 Users.
* 800 shares.
Based on the exhibit,

which criteria shared by customer supports the requirement of additional nodes?

  • A. 800 shares.
  • B. 11.8 TB of data.
  • C. 360000 files.
  • D. 2400 Users.

Answer: C


NEW QUESTION # 33
When using Nutanix Sizer, which solution does the Automatic sizing option provide?

  • A. A solution that meets provided requirements, plus a default 25% growth capacity
  • B. The lowest cost solution that meets the provided requirements
  • C. The highest performance solution that meets the provided requirements
  • D. A solution that balances cost and performance, plus a default 25% growth capacity

Answer: A


NEW QUESTION # 34
A customer is running AHV in their Nutanix cluster and wants to provide their users with the ablility to restore individual files from snapshots.
What is the minimum level of licensing that must be applied to the Nutanix cluster?

  • A. Starter
  • B. Ulimate
  • C. Pro
  • D. Pro with the Advanced Replication SKU

Answer: C


NEW QUESTION # 35
A customer wants to decrease costs and increase efficiency by eliminating NAS silos and adopting a cloud-like mindset. Which Nutanix product meets these requirements?

  • A. Nutanix Beam
  • B. Nutanix Calm
  • C. Nutanix Files
  • D. Nutanix Xi Frame

Answer: C


NEW QUESTION # 36
What is an important consideration when using RVTools output for sizing a solution?

  • A. It is a point in time snapshot of the environment.
  • B. It only captures provisioned storage.
  • C. No infomation on the physical hosts is collected.
  • D. Only powered on VMs are included in the data.

Answer: A


NEW QUESTION # 37
An administrator receive report that VDI desktop performance in an 8-node Nutanix VDI environment is poor.
Opening applications takes between 1 and 2 minutes. When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU wait time: 11 %
* CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?

  • A. Add CPU resources to the cluster
  • B. Increase the amount of SSD storage in the cluster
  • C. Ad memory to the nodes in the cluster
  • D. Increase the number of vCPU cores allocated to the CVM

Answer: C


NEW QUESTION # 38
A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

  • A. Node B sends a leadership request to the Witness VM and goes into single-node mode.
  • B. All operations and services on the Node B are shut down and go into a waiting state.
  • C. The cluster is unaffected and no administrator intervention is required.
  • D. The- cluster becomes unavailable and goes into read-only mode.

Answer: A


NEW QUESTION # 39
An SE and a prospect decide on a specific node configuration. The SE changes the Sizer scenario from Automatic to manual mode to select the exact configuration decided with the prospect.
What additional detail should the SE now consider in the Sizing scenario?

  • A. Curator Capacity.
  • B. CVM Memory overhead.
  • C. Block Awareness.
  • D. N + 1 availability.

Answer: D


NEW QUESTION # 40
Whthin an RVtools output, which tab provides actual utilization information on thick provisioned disks?

  • A. vinfo
  • B. vPartition
  • C. vDisk
  • D. vCluster

Answer: A


NEW QUESTION # 41
Where are Leap Availability Zones configured?

  • A. Prism Element
  • B. Prism Central
  • C. Cloud Connect
  • D. Controller VM

Answer: B

Explanation:
Explanation
Terminology
* Availability Zone - it is represented by all resources (Nutanix Clusters) connected to Prism Central or Xi Leap Availability zone. Depends on the architecture, Availability zone can represent geographic territory, datacenter or server room in the datacenter. Protection policies - in protection policies you set up (RPO, Retention), rules to auto-apply policies to virtual machines
https://vmwaremine.com/2019/02/08/nutanix-leap-runbooks-part-1/#sthash.VwrzSzhQ.dpbs


NEW QUESTION # 42
A customer is provisioning 1,000 linked clone desktops with View Composer for their call center. During a short period between shift changes,desktops must be rebooted.
Which Nutanix feature will help to mitigate the desktop boot times?

  • A. Shadow Clones
  • B. Content Based Read Cache
  • C. Performance Tier De-duplication
  • D. View Acceleration Array Intergration''

Answer: A


NEW QUESTION # 43
A customer performs a 1-click, non-disruptive upgrade on a 3-node Nutanix cluster. While the CVM on Node A is rebooting, a VM on Node A overwrites an existing block of data. How does Nutanix AOS ensure data integrity during the upgrade?

  • A. AOS leverages Erasure Coding to maintain resiliency.
  • B. AOS marks the replica as read only and waits until the original replica is back online to prevent corruption.
  • C. AOS writes two copies across the remaining nodes to maintain resiliency
  • D. AOS only overwrite the available copy and waits until the original copy is back online before restoring resiliency

Answer: C


NEW QUESTION # 44
what information can be gathered about the configuration of the VM storage?

  • A. Total disk usage is high
  • B. Storage capacity is a problem
  • C. Majority of VMs are Thin Provisioned.
  • D. VMs have many disks.

Answer: A


NEW QUESTION # 45
When creating a multi-cluster scenario in Sizer, what does the Summary Failover Capacity indicator (N+0, N+1) display?

  • A. N+0, if the RAM utilization for all cluster in the scenario.
  • B. N+0, if the CPU utilization for all clusters falls below N+1 resiliency.
  • C. The indicator shows the worst resiliency level of any cluster in the scenario
  • D. The indicator shows the best resiliency level of any cluster in the scenario

Answer: D


NEW QUESTION # 46
......

NCSE-Core Premium Exam Engine pdf Download: https://www.torrentvce.com/NCSE-Core-valid-vce-collection.html

Verified NCSE-Core Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1BT7Z86nsT68Jmac4zHXG1oHLbP5eB19D