NACE-CIP2-001 PDF Dumps Jan 06, 2022 Exam Questions – Valid NACE-CIP2-001 Dumps
Ultimate NACE-CIP2-001 Guide to Prepare Free Latest NACE Practice Tests Dumps
NEW QUESTION 48
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Sacking
- B. High-pressure water washing
- C. Stoning
- D. Acid etching
Answer: A
NEW QUESTION 49
The primary purpose of Fireproofing coatings are to provide:
- A. Explosion resistance
- B. Preferential fuel for the fire
- C. fire extinguishing characteristics
- D. Temporary protection for the structure
Answer: D
NEW QUESTION 50
When conducting inspections the Inspector should follow which standards:
- A. The specified standards
- B. NACE and SSPC standards in North America
- C. ISO standards in Europe and Asia
- D. Australian standards in Australia
Answer: A
NEW QUESTION 51
The most likely area of failure on a buried external pipeline coating is the:
- A. Ground bed
- B. Field joint coating
- C. Areas exposed to Ultra Violet light
- D. Mainline coating
Answer: B
NEW QUESTION 52
You are the NACY Coating Inspector on a tank lining project where desiccant dehumidification is being used. Since the first shift of abrasive blasting your readings have indicated relative humidity below 40%; however on the second shift of coating application your readings are indicting 80%.
Your FIRST preferred course of action is to:
- A. Check to See if the dehumidification equipment is operating correctly
- B. Advise the coating applicator supervisor of your readings
- C. Document the readings at the end of the shift
- D. Call your supervisor
Answer: B
NEW QUESTION 53
All of these are advantages of using repair patches EXCEPT
- A. excellent abrasion resistance.
- B. special tools or equipment are required.
- C. barrier to moisture and corrosion.
- D. inert to common acids, alkalis, and solvents.
Answer: B
NEW QUESTION 54
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Cure stage
- B. Flow stage
- C. Wetting stage
- D. Gel stage
Answer: B
NEW QUESTION 55
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Distribution
- B. Transmission
- C. Midstream
- D. Gathering
Answer: A
NEW QUESTION 56
Non-Conformance Reports are designed to:
- A. Elevate the status of the Inspector
- B. To identify items that do not meet the specification requirements
- C. Punish the Contractor for substandard work
- D. Assist the Owner in negotiating credits from the Contractor
Answer: B
NEW QUESTION 57
Which is used to calibrate a pH meter?
- A. Distilled water
- B. Standard buffer solution
- C. Deionized water
- D. Standard solvent solution
Answer: B
NEW QUESTION 58
Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?
- A. Acid etching
- B. High-pressure water washing
- C. Sacking
- D. Stoning
Answer: A
NEW QUESTION 59
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?
- A. Coal Tar Enamel
- B. Concrete
- C. Liquid epoxies
- D. Heat-shrink sleeves
Answer: C
NEW QUESTION 60
External coatings applied to buried pipelines are generally tested for:
- A. Solvent resistance
- B. Chalking resistance
- C. Gloss level
- D. Cathodic disbondment
Answer: D
NEW QUESTION 61
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Verbally challenge the NCR
- B. Consult your supervisor
- C. Request a re-blast of the item in question
- D. Review the NCR with the other Inspector
Answer: B
NEW QUESTION 62
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:
- A. Latex
- B. Organic coatings
- C. Inorganic Coatings
- D. Polyurea
Answer: C
NEW QUESTION 63
......
Passing Key To Getting NACE-CIP2-001 Certified Exam Engine PDF: https://www.torrentvce.com/NACE-CIP2-001-valid-vce-collection.html
Get Top-Rated NACE NACE-CIP2-001 Exam Dumps Now: https://drive.google.com/open?id=1isHfE3ITSXRXtCmNmhwxGQV8XozMhFpO