[Mar 13, 2025] NSE7_SDW-7.2 Test Engine files, NSE7_SDW-7.2 Dumps PDF [Q46-Q63]

Share

[Mar 13, 2025] NSE7_SDW-7.2 Test Engine files, NSE7_SDW-7.2 Dumps PDF

Latest Fortinet NSE7_SDW-7.2 PDF and Dumps (2025) Free Exam Questions Answers


Fortinet NSE7_SDW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • SD-WAN Overlay Design and Best Practices: It focuses on the deployment of hub-and-spoke IPsec topologies and configuring ADVPN. Proficiency in this topic ensures that Fortinet network and security professionals can implement effective and reliable SD-WAN overlays tailored to organizational needs.
Topic 2
  • Centralized Management: This area focuses on deploying and managing SD-WAN through FortiManager, including using IPsec templates and SD-WAN Overlay Templates. Mastery here demonstrates the abilities of Fortinet network and security professionals to streamline SD-WAN configuration, enhance security, and maintain consistent policies across multiple sites.
Topic 3
  • SD-WAN Troubleshooting: Troubleshooting SD-WAN issues, including rules, routing, and ADVPN, is vital for maintaining network reliability. This section of the Fortinet NSE 7 - SD-WAN 7.2 exam tests the ability to diagnose and resolve SD-WAN problems using diagnostic commands and monitoring tools, ensuring robust and uninterrupted network operations.
Topic 4
  • SD-WAN Configuration: This topic assesses skills of Fortinet network and security professionals in setting up basic SD-WAN environments, including configuring Direct Internet Access (DIA), SD-WAN Members, and Performance Service Level Agreements (SLAs). Proficiency here ensures the ability to design efficient and resilient SD-WAN configurations.
Topic 5
  • Rules and Routing: Understanding SD-WAN Rules and Routing is crucial for directing traffic effectively. This topic of the NSE7_SDW-7.2 exam evaluates the capabilities of Fortinet network and security professionals to configure SD-WAN rules and routing.

 

NEW QUESTION # 46
Exhibit.

Which conclusion about the packet debug flow output is correct?

  • A. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
  • B. The total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
  • C. The packet size exceeded the outgoing interface MTU.
  • D. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.

Answer: D

Explanation:
In a Per-IP shaper configuration, if an IP address exceeds the configured concurrent session limit, the message
"Denied by quota check" appears. SD-WAN 7.0 Study Guide page 287


NEW QUESTION # 47
Which statement is correct about SD-WAN and ADVPN?

  • A. SD-WAN can steer traffic to ADVPN shortcuts, established over IPsec overlays, configured as
    SD-WAN members.
  • B. SD-WAN does not monitor the health and performance of ADVPN shortcuts.
  • C. Routes for ADVPN shortcuts must be manually configured.
  • D. You must use IKEv2 on IPsec tunnels.

Answer: A


NEW QUESTION # 48
Refer to the exhibit.

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to
the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over
T_INET_0_0. However, the traffic is routed over T_INET_1_0.
Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)

  • A. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.
  • B. T_INET_0_0 does not have a valid route to the destination.
  • C. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.
  • D. T_INET_1_0 has a higher member configuration priority than T_INET_0_0.

Answer: B,C


NEW QUESTION # 49
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit A shows the SD-WAN performance SLA configuration, the SD-WAN rule configuration, and the
application IDs of Facebook and YouTube. Exhibit B shows the firewall policy configuration and the underlay
zone status.
Based on the exhibits, which two statements are correct about the health and performance of port1 and port2?
(Choose two.)

  • A. FortiGate identifies the member as dead when there is no Facebook and YouTube traffic passing
    through the member.
  • B. The performance is an average of the metrics measured for Facebook and YouTube traffic passing
    through the member.
  • C. Non-TCP Facebook and YouTube traffic are not used for performance measurement.
  • D. FortiGate is unable to measure jitter and packet loss on Facebook and YouTube traffic.

Answer: B,C

Explanation:
Explanation
Study Guide 7.2, pages 103 - 104. Another comment said "because without using application Control on the
firewall policy, SDWAN can't work" but there is a app control "default" defined on config.


NEW QUESTION # 50

Exhibit B -

Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the
managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an
SD-WAN zone for port1 and port2?

  • A. port2 is referenced in a static route.
  • B. port1 is referenced in a firewall policy.
  • C. port1 and port2 are not administratively down.
  • D. port1 is assigned a manual IP address.

Answer: B


NEW QUESTION # 51
Refer to the exhibit.

FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

  • A. Specify a unique peer ID for each dial-up VPN interface.
  • B. Use unique Diffie Hellman groups on each VPN interface.
  • C. Use different proposals are used between the interfaces.
  • D. Configure the IKE mode to be aggressive mode.

Answer: A,D


NEW QUESTION # 52
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit A shows an SD-WAN event log and exhibit B shows the member status and the SD-WAN rule configuration.
Based on the exhibits, which two statements are correct? (Choose two.)

  • A. FortiGate updated the outgoing interface list on the rule so it prefers port2.
  • B. Port2 has a lower latency than port1.
  • C. SD-WAN rule ID 1 is set to lowest cost (SLA) mode.
  • D. Port2 has the highest member priority.

Answer: A,B


NEW QUESTION # 53
Refer to the exhibits.
Exhibit A -

Exhibit B -

Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?

  • A. Disable allow-subnet-overlap under config system settings.
  • B. Enable auxiliary-session under config system settings.
  • C. Enable snat-route-change under config system global.
  • D. Disable tcp-session-without-syn under config system settings.

Answer: D


NEW QUESTION # 54
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

  • A. The overlay zone contains four members.
  • B. The corporate zone contains no member.
  • C. You can delete the virtual-wan-link zone because it contains no member.
  • D. You can move port1 from the underlay zone to the overlay zone.

Answer: B

Explanation:
Based on the exhibit, the "corporate" zone contains no member (B). In the FortiGate GUI, zones without members do not display any interfaces listed under them, which is the case for the corporate zone in the exhibit. References: This conclusion is based on standard Fortinet GUI interpretation and the operational logic of SD-WAN zones as per Fortinet's guidelines and user interface standards.


NEW QUESTION # 55
Refer to the exhibits.
Exhibit A -

Exhibit B -

Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?

  • A. Web filtering must be enabled on the firewall policy.
  • B. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
  • C. Destination internet service must be enabled on the traffic shaping policy.
  • D. Application control must be enabled on the firewall policy.

Answer: A


NEW QUESTION # 56
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)

  • A. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.
  • B. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.
  • C. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
  • D. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.

Answer: B,C


NEW QUESTION # 57
Which two performance SLA protocols enable you to verify that the server response contains a specific value?
(Choose two.)

  • A. dns
  • B. icmp
  • C. http
  • D. twamp

Answer: A,C

Explanation:
Performance SLA (Service Level Agreement) protocols are used in SD-WAN to monitor the quality and performance of various network services. The two protocols that specifically allow for verifying a specific value in the server response are:
* HTTP (Hypertext Transfer Protocol): HTTP is the foundation of data communication on the World Wide Web. It allows for fetching resources, such as HTML documents. You can configure an HTTP performance SLA to send specific requests (e.g., GET or POST) and then check if the response body contains a particular string or value. This is useful for validating web server functionality and content delivery.
* DNS (Domain Name System): DNS is responsible for translating domain names into IP addresses. A DNS performance SLA can be set up to query a specific domain and verify that the returned IP address or other DNS record values match what is expected. This helps ensure proper name resolution and accessibility of resources.


NEW QUESTION # 58
Refer to the exhibits.
Exhibit A -

Exhibit B -

Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?

  • A. Web filtering must be enabled on the firewall policy.
  • B. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
  • C. Destination internet service must be enabled on the traffic shaping policy.
  • D. Application control must be enabled on the firewall policy.

Answer: A


NEW QUESTION # 59
Refer to the exhibit.

Exhibit B -

Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?

  • A. port2 is referenced in a static route.
  • B. port1 is referenced in a firewall policy.
  • C. port1 and port2 are not administratively down.
  • D. port1 is assigned a manual IP address.

Answer: B


NEW QUESTION # 60
Refer to the exhibit.

Based on the exhibit, which action does FortiGate take?

  • A. FortiGate brings down port5 after it detects all SD-WAN members as dead.
  • B. FortiGate brings up port5 after it detects all SD-WAN members as alive.
  • C. FortiGate bounces port5 after it detects all SD-WAN members as dead.
  • D. FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.

Answer: D


NEW QUESTION # 61
Refer to the exhibits.
Exhibit A

Exhibit B -

Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the
routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?

  • A. The traffic will be routed over T_INET_1_0.
  • B. The traffic will be load balanced across all three overlays.
  • C. The traffic will be routed over T_MPLS_0.
  • D. The traffic will be routed over T_INET_0_0.

Answer: A


NEW QUESTION # 62
Refer to the exhibits.

Exhibit A shows the packet duplication rule configuration, the SD-WAN zone status output, and the sniffer
output on FortiGate acting as the sender. Exhibit B shows the sniffer output on a FortiGate acting as the
receiver.
The administrator configured packet duplication on both FortiGate devices. The sniffer output on the sender
FortiGate shows that FortiGate forwards an ICMP echo request packet over three overlays, but it only receives
one reply packet through T_INET_1_0.
Based on the output shown in the exhibits, which two reasons can cause the observed behavior? (Choose two.)

  • A. The ICMP echo request packets sent over T_INET_0_0 and T_MPLS_0 were dropped along the way.
  • B. On the receiver FortiGate,packet-de-duplicationis enabled.
  • C. On the sender FortiGate,duplication-max-numis set to3.
  • D. The ICMP echo request packets received over T_INET_0_0 and T_MPLS_0 were offloaded to NPU.

Answer: B,C


NEW QUESTION # 63
......

Pass Your NSE 7 Network Security Architect NSE7_SDW-7.2 Exam on Mar 13, 2025 with 96 Questions: https://www.torrentvce.com/NSE7_SDW-7.2-valid-vce-collection.html

NSE7_SDW-7.2 Free Exam Study Guide! (Updated 96 Questions): https://drive.google.com/open?id=1tIOr9Kb9erWqJwfeg9g62YMUzsWvrJUT