Latest [Oct 15, 2021] Nutanix NCP-MCI-5.15 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning Nutanix NCP-MCI-5.15
NEW QUESTION 41
An Engineer logs into a CVM to troubleshoot connectivity loss between two CVMs and find the following interfaces subnets and WLANs configured.
-eth0 - VLAN10-10.1.10.0/24
eth01-No VLAN-192.168.5.0/24
eth2 - LAN20-10.1.20.0/24
Which two Nutanix networking features are being utilized? (Choose two)
- A. Backplane LAN
- B. Internal vSwitch
- C. Network Load balancing
- D. IP address management (IPAM)
Answer: A,B
NEW QUESTION 42
which cli is used to run this command? (cluster version)
- A. ecli
- B. ncli
- C. bash shell
- D. acli
Answer: B
NEW QUESTION 43
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Email Digest
- B. Syslog
- C. Individual Alerts
- D. SNMP
Answer: A
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central to sent alert emails.
* Check the Email Every Alert box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 44
A configuration is single domain, single forest, and does not use SSL.
Which port number should be used to configure LDAP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 45
Which type of data is distributed by Zookeeper to ensure availability in the case of node or block failure?
- A. Snapshot Data
- B. User Data
- C. Configuration Data
- D. Metadata
Answer: C
NEW QUESTION 46
An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?
- A. Live migration is prevented until the administrator manually changes the newer processor level.
- B. Live migration continues to function as expected and VMs can move to any AHV host.
- C. Live migration is prevented until the administrator enables the legacy migration option.
- D. Live migration of VMs is prevented between newer and older processors.
Answer: D
NEW QUESTION 47
A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.
What is the result?
- A. The VMs with data on those drives crash, and an HA event occurs, restarting them on a remaining healthy node.
- B. The cluster runs in a degraded state until the failed drives are replaced and the data has been restored to three replicas.
- C. Sixty minutes after the failures a rebuild of the lost data can remaining HDDs begins to restore to three replicas.
- D. The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.
Answer: D
NEW QUESTION 48
AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.
At which two instances does the address release back to the pool? (Choose two)
- A. The IP address is changed to static.
- B. The VM NIC is deleted.
- C. The IP address lease expires
- D. The VM is deleted.
Answer: B,D
Explanation:
https://portal.nutanix.com/page/documents/solutions/details/?targetId=BP-2029_AHV:BP-2029_AHV Administrators can use Acropolis with IPAM to deliver a complete virtualization deployment, including network management, from the unified Prism interface. This capability radically simplifies the traditionally complex network management associated with provisioning VMs and assigning network addresses. To avoid address overlap, be sure to work with your network team to reserve a range of addresses for VMs before enabling the IPAM feature.
The Acropolis master assigns an IP address from the address pool when creating a managed VM NIC; the address releases back to the pool when the VM NIC or VM is deleted.
NEW QUESTION 49
An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.
Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?
- A. A cluster entity chart with each of the relevant metrics
- B. A VM entity chart with each of the relevant metrics.
- C. A cluster metric chart for each of the relevant metrics
- D. A VM metric chart for each of the relevant metrics
Answer: A
NEW QUESTION 50
An administrator wants to make sure that the health of a cluster is in a good state.
Which command the utility will provide information related to the health of the cluster?
- A. generic status
- B. iostat
- C. top
- D. ncc
Answer: D
NEW QUESTION 51
An administrator is trying to create an additional account on the Nutanix cluster in Prism Element but is unable to create new users.
- A. The administrator's account is assigned a Cluster Admin role.
- B. The cluster has reached the minimum number of accounts.
- C. The OpenLDAP server was temporarily down for maintenance.
- D. The connection to Active Directory server is disconnected.
Answer: A
Explanation:
Reference:
https://next.nutanix.com/prism-infrastructure-management-26/user-management-and-ldap-s-setupin-prism-element-and-prism-central-37338?postid=50119
NEW QUESTION 52
An administrator has a cluster in a secure environment. The administrator wants to disable password authentication over SSH to access the cluster.
Which configure should the administrator use to disable password authentication over SSH?
- A. Enable Cluster Lockdown in Prism
- B. Modify the SSH Configuration on each CVM
- C. Modify the SSH configuration on each host
- D. Configure a proxy server in Prism
Answer: A
NEW QUESTION 53
A guest VM should be able to tolerate simultaneous failure of two nodes or drives.
What are the minimum requirements for the Nutanix cluster?
- A. 3 nodes with cluster RF 3 and container RF 2
- B. 3 nodes with cluster RF 3 and container RF 3
- C. 5 nodes with cluster RF 3 and container RF 3
- D. 5 nodes with cluster RF 2 and container RF 3
Answer: C
Explanation:
Reference:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_16:arcredundancy-factor3-c.html
NEW QUESTION 54
How should an administrator correct an SSL error while connecting to a Nutanix Cluster?
- A. AD group policy
- B. add cert to trusted in local system
- C. create new cert from AD CA Authority
- D. renew ssl self signed
Answer: D
NEW QUESTION 55
What is the function of the virbr0 bridge on AHV?
- A. To carry all traffic between the user VMs and the upstream network.
- B. To carry storage communication between the guest VMs and the CVM
- C. To carry management and storage communication between user VMs and the CVM.
- D. To carry management and storage communication between user VMs and AHV host.
Answer: D
Explanation:
http://www.vstellar.com/2019/01/10/ahv-networking-part-1-basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%20have%20IP%20address%20192.168.
NEW QUESTION 56
An administrator migrates a Windows VM from an ESXi host to a Nutanix AHV cluster. When powered on, the migrated VM fails to start. The VM console shows the error message:
Cannot locate boot device
What should the administrator confirm to identify the reason that the VM fails to boot?
- A. The Windows OS is at a supported patch level.
- B. The ESXi source cluster can ping the destination AHV cluster.
- C. VM snapshots on the source cluster were consolidated.
- D. Nutanix Virt IO drivers were installed on the VM pre-migration.
Answer: D
NEW QUESTION 57
what applies to prism central?
- A. setup through prism as 1,2 or 3-VMs
- B. clusters and PC need to match hypervisor
- C. created during foundation
- D. created bu user as 1 or 3-VM
Answer: D
NEW QUESTION 58
An administrator needs to power down an AHV node in order to replace a failed DIMM?
Which step should the administrator take after placing the node into maintenance mode?
- A. Shut Down the nutanix CVM
- B. Execute the command cluster status
- C. Reboot the Nutanix CVM
- D. Power of the node
Answer: A
NEW QUESTION 59
An administrator is migrating ESXi VMs to a Nutanix AHV cluster. The VM data is available to the AHV system.
Which process must the administrator complete below AHV VMs can be create?
- A. Rename the -flat.vmdk files for the VM based on the VM UUID
- B. Import the VMs .vmx file using the Image Service
- C. Import the VM's -flad.vmdk files using the Image Service
- D. Import the VM's .nvram file using the Image Service
Answer: C
NEW QUESTION 60
Which Nutanix cluster service manages VM access to the Distributed Storage Fabric?
- A. Pithos
- B. Acropolis
- C. Stargate
- D. Medusa
Answer: C
NEW QUESTION 61
An administrator wants to view the IOPs statistics for each host simultaneously on the same graph.
Which type of chart on the analysis page meets this requirement?
- A. Entity Chart
- B. Measurement chart
- C. Performance chart
- D. Metric chart
Answer: D
NEW QUESTION 62
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Destroy a cluster.
- B. Remove a Node from a cluster
- C. Move Nodes between clusters.
- D. Upgrade a cluster
- E. Migrate a cluster
Answer: A,B,C
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_managing_c.html Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
* You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
* Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
* You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
* You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION 63
In which two scenarios is an automated live migration likely to occur? (Choose two)
- A. Hypervisor upgrade
- B. Cluster resource hotspot
- C. AOS upgrade
- D. Network upgrade
Answer: A,B
NEW QUESTION 64
Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)
- A. Allows proxy server settings to be set up for a defined network
- B. Allows AHV to assign IP addresses automatically to VMs using DHCP
- C. Configures firewall rules to prevent or allow certain TCP/IP traffic
- D. Configures a VLAN with an IP subnet and assigns a group of IP addresses
Answer: B,D
NEW QUESTION 65
An administrator has just executed a maintenance window for some applications running on their nutanix cluster. After completing the maintenance, they want to assess the health of the cluster and make sure that there is no impact during the maintenance.
Which three dashboards in prism will assist the administrator in making this determination? (Choose Three)
- A. Tasks
- B. Alerts
- C. Analysis
- D. Cluster Health
- E. Data Protection
Answer: B,D,E
NEW QUESTION 66
......
Authentic Best resources for NCP-MCI-5.15 Online Practice Exam: https://www.torrentvce.com/NCP-MCI-5.15-valid-vce-collection.html