HP HPE6-A45 Practice Test Pdf Exam Material
HPE6-A45 Answers HPE6-A45 Free Demo Are Based On The Real Exam
The benefit of obtaining the HPE6-A45 Implementing Aruba Campus Switching solutions Exam Certification
Getting a professional certification in the SAS domain is indeed a wise decision as there are immense benefits of this credential.
- Learning SAS will not cause you to abandon the previous data formats acknowledged by you like Oracle and DB2.
- You’ll simply connect with the worldwide network of SAS consultants and users to exchange knowledge and concepts.
- As there is a worldwide requirement for SAS experts, you’ve got the selection to use for employment in many alternative locations around the world.
- HPE6-A45 Implementing Aruba Campus Switching Solutions certification has more useful and relevant networks that help them in setting career goals for themselves. HPE6-A45 Implementing Aruba Campus Switching solutions networks provide them with the correct career guidance than non-certified generally are unable to get.
- Freshers will get a spectacular pay package and dealing professionals will get guaranteed professional advancement through the SAS accreditation courses.
HPE6-A45 Implementing Aruba Campus Switching solutions Exam Topics
Candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our HPE6-A45 dumps will include the following topics:
1. Identify, describe, and apply foundational networking architectures and technologies
- Identify, describe, and explain VLANs.
- Describe the basics of Layer 2 Ethernet to include broadcast domains and ARP messages.
- Identify the roles of TFTP, SFTP, FTP, Telnet, SNMPv2, and SNMPv3 in the management of Aruba network devices, and apply the appropriate security for these features.
- Describe and apply link aggregation.
2. Identify, describe, and differentiate the functions and features of Aruba products and solutions
- Compare and contrast Aruba Networking solutions and features and identify the appropriate product for an environment.
- Identify basic features and management options for Aruba wired and wireless products.
- Identify and explain how Aruba, a Hewlett Packard Enterprise company, delivers solutions that enable the digital workplace.
3. Install, configure, set up, and validate Aruba networking solutions
- Configure ArubaOS switches with Layer 2 technologies such as RSTP and MSPT, link aggregation, VLANs, LLDP, and device profiles.
- Configure basic features on ArubaOS switches to include initial settings and management access.
- Validate the installed solution with the use of debugging technology, logging, and show and display commands.
- Manage the software and configuration files on ArubaOS switches and manage ArubaOS switches and APs with Aruba AirWave.
- Configure basic IP routing with static routes or OSPF on ArubaOS switches.
4. Tune, optimize, and upgrade Aruba networking solutions
- Optimize Layer 2 and Layer 3 infrastructures through broadcast domain reduction, VLANs, and VSF.
5. Manage, monitor, administer, and operate Aruba networking solutions
- Perform administrative tasks such as moves, adds, changes, deletions, and password resets for managed devices.
- Perform network management following best practices.
NEW QUESTION 46
Refer to the exhibit.
Every switch in the exhibit will route traffic. The company requires a topology in which failover for switch-to- switch links is exclusively handled by the routing protocol and occurs as quickly as possible. Which topology should the administrator use?
- A. D
- B. A
- C. C
- D. B
Answer: D
NEW QUESTION 47
Refer to the exhibits.
Exhibit 1
Exhibit 2
Network administrators are alerted to high interface utilization on a switch by a management solution. They examine the utilization on the uplink interfaces several times an hour during problem times. The exhibit shows output typical of times of congestion. The administrators want to allocate bandwidth fairly and reduce congestion on the uplinks.
What could help meet these requirements?
- A. an outbound rate limit on each edge port
- B. a per-queue rate limit on interfaces 1 and 2
- C. a broadcast rate limit on each edge port
- D. an outbound rate limit on interfaces 1 and 2
Answer: C
NEW QUESTION 48
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?
- A. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.
- B. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
- C. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.
- D. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of
100 Mbps or higher.
Answer: A
NEW QUESTION 49
Exhibit
Switch-2, Switch-5 and Switch-6 currently have many OSPF routes to Area 1 networks.
The network administrator wants to replace these routes with a single aggregated route to
10.10.1.0.0/16 on each switch. Where should the administrator specify the 10.1.0.0/61 range?
- A. In the Switch-2 OSPF Area 2 configuration
- B. In the Switch-2, Switch-5, and Switch-6 OSPF global configuration
- C. In the Switch-1 OSPF Area 1 configuration
- D. In the Switch-1 OSPF Area 0 configuration
Answer: D
NEW QUESTION 50
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator sets up PIM-DM to route traffic from the multicast source to clients in VLAN 24.
The server begins to forward multicasts, and the clients are set up to receive them. However, the multicasts do not reach the clients.
Based on the output, what should the administrator verify?
- A. that Switch-1 has selected Switch-2 as its RP for 239.1.1.1
- B. that Switch-2 has PIM-DM enabled on VLAN 10
- C. that state refreshes are enabled on Switch-2
- D. that VLAN 24 on Switch-1 runs both IGMP and PIM-DM
Answer: B
NEW QUESTION 51
A customer wants to authenticate AOS-Switch managers to a RADIUS server.
The CIO wants to assign different rights to different management users for granular control over their rights and privileges.
What must the network administrator enable on the AOS- Switches to ensure they comply with this plan?
- A. RADIUS-based command authorization
- B. SNMPv3 and SNMPv3 restricted access.
- C. authentication login privileges
- D. a manager and operator password
Answer: C
NEW QUESTION 52
A customer wants access layer switches that support routing. ACLs, VSF stacking, and SFP+. Which Aruba switch model meets the customer's requirements?
- A. 0
- B. 1
- C. 2930F
- D. 2
Answer: C
NEW QUESTION 53
Refer to the exhibits.
Exhibit 1
Exhibit 2
Which change to the environment would cause clients to fail to receive DHCP settings?
- A. the addition of a new VLAN on the link aggregation between Switch-1 and Switch-2
- B. a change of IP address on the network DHCP server
- C. a change in the Switch-1 option 82 policy to replace
- D. the addition of a new link to the link aggregation between Switch-1 and Switch-2
Answer: C
NEW QUESTION 54
Exhibit
Switch-1 and Switch-2 are configured to provide VRRP in VLAN2. The default gateway for VLAN 2 is set to the VRRP virtual IP. Client-1 in VLAN 2 cannot ping its Default gateway.
Based on the exhibits, what can administrators determine?
- A. Switch-1 and Switch-2 have the same virtual router ID. The conflict interfaces with connectivity.
- B. Preempt modes is enabled on both Switch-1 and Switch-2, so the Master role continues to alternate between them, and the pings go astray.
- C. This is the expected behavior, and Switch-1 should still be able to route traffic for Clint-1.
- D. The VRRP preempt delay time has not yet expired, and administrators should try to ping the gateway again in several minutes.
Answer: A
NEW QUESTION 55
Refer to the exhibit.
Every switch in the exhibit will route traffic. The company requires a topology in which failover for switch-to-switch links is exclusively handled by the routing protocol and occurs as quickly as possible. Which topology should the administrator use?
- A. D
- B. A
- C. C
- D. B
Answer: D
NEW QUESTION 56
The security policy for a company requires that switches use SNMPv3 and accept all read-only SNMPv2c messages. The network administrator enables SNMPv3. Which additional action should the network administrator take to comply with this policy?
- A. Disabled SNMPv3 inform timeouts.
- B. Enable SNMPv3 only operation.
- C. Enable SNMPv3 restricted mode.
- D. Disable SNMPv1/v2c.
Answer: C
NEW QUESTION 57
A network administrator configures DHCP snooping on VLAN 2.
How does the switch handle DHCP traffic that arrives in this VLAN on an untrusted interface?
- A. It accepts both client and server packets as long as they match the DHCP binding table.
- B. It accepts packets from a DHCP server, but drops client packets.
- C. It drops all DHCP traffic logs a security event.
- D. It accepts client packets, but drops packets from a DHCP server.
Answer: B
NEW QUESTION 58
Refer to the exhibit.
Switch-1 and Switch-2 are AOS-Switches, which are iBGP peers. ISP 1 and ISP 2 advertise some routes to the same Internet destinations. Switch-1 and Switch-2 must select between these routes based on AS path length.
What is required for Switch-1 and Switch-2?
- A. iBGP synchronization enabled
- B. Multihop enabled for the connection to the iBGP neighbor
- C. eBGP and iBGP administrative distance set to the same value
- D. ECMP disabled for BGP
Answer: C
NEW QUESTION 59
Refer to the exhibit.
The routing switches shown in the exhibit run OSPF on the links between each other. The commander in the Switch-1 VSF fabric goes down. Traffic is disrupted for several seconds.
What should a network administrator do to support a faster failover in a similar situation?
- A. Configure graceful restart, or nonstop OSPF, on Switch-1 and Switch-2, with a proper timer.
- B. Create a redundant virtual link between Switch-1 and Switch-2.
- C. Add VRRP on the VLAN between Switch-1 and Switch-2.
- D. Configure echo mode BFD on the VLAN that connects Switch-1 and Switch-2.
Answer: D
NEW QUESTION 60 
A network administrator applies the ACL shown in the exhibit.
Which source IP address does the myList ACL deny?
- A. 10.1.2.10
- B. 10.1.1.10
- C. 10.2.1.10
- D. 10.1.0.10
Answer: C
NEW QUESTION 61
AOS-Switches authenticate guests to ClearPass with captive portal. When guests first connect their device to the network, they are redirected to a captive portal in which they log in. ClearPass then stores the guest MAC addresses, and the guests are permitted access. Due to a conflict, the network administrator needs to change the dynamic authorization port, port 3799 on Aruba ClearPass.
If the administrator forgets to also change the port on one of the AOS-Switches, what will be one symptom?
- A. Guests are redirected to the system listening on port 3799
- B. Some guests receive full access to the network when they first connect instead of being redirected to the portal page
- C. When some guests successfully authenticate in the captive portal, they are redirected back to the portal page
- D. Some guests are unable to reach the captive portal page. Instead, they receive no access at all
Answer: D
NEW QUESTION 62
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator applies the ACL to Switch-2, as shown in the exhibit. Device-1, IP address
10.1.10.10/24, attempts to open an HTTP session with host 192.0.2.10 on the Internet. What happens with this attempt?
- A. Switch-2 filters both the traffic from Device-1 and the return traffic with the ACL. The return traffic is dropped.
- B. Switch-2 does not filter any of this traffic with the ACL, and the session establishes successfully
- C. Switch-2 filters only the return traffic from the Internet with the ACL, and the ACL drops this traffic
- D. Switch-2 filters only the traffic from Device-1 with the ACL, and the session establishes successfully.
Answer: B
NEW QUESTION 63
Exhibit
The network administrator configures the commands shown in Exhibit 2. Which mismatch will cause an issue?
- A. The mismatch between the key IDs specified in chain 10 and chain 11 on Switch-1
- B. The mismatch between the key-strings in the chains for VLAN 10 and VLAN 11 on Switch-1
- C. The mismatch between the chain names associated with VLAN 11 on Switch-1 and on Switch-3
- D. The mismatch between the key-strings associated with VLAN 10 on Switch-1 and on Switch-2
Answer: B
NEW QUESTION 64
Refer to the exhibit.
A company requires distribution layer switches that can provide Layer 2 and Layer 3 redundancy. The exhibit shows the proposal for these switches. Which change to the proposal will help meet the company's requirements?
- A. The proposed switches should be replaced with switches such as the Aruba 2930M to support the backplane stacking technology.
- B. VRRP should be implemented instead of backplane stacking to support the Layer 3 redundancy requirements.
- C. Link aggregations should be established without LACP to support the Layer 2 redundancy requirements and backplane stacking limitations.
- D. The proposed switches should be replaced with switches that support VSF to support the required distance between stack members.
Answer: C
NEW QUESTION 65
Refer to the exhibit.
Switch-2, Switch-5, and Switch-6 currently have many OSPF routes to Area 1 networks. The network administrator wants to replace these routes with a single aggregated route to 10.1.0.0/16 on each switch. Where should the administrator specify the 10.1.0.0/16 range?
- A. in the Switch-2 OSPF Area 2 configuration
- B. in the Switch-1 OSPF Area 0 configuration
- C. in the Switch-2, Switch-5, and Switch-6 OSPF global configuration
- D. in the Switch-1 OSPF Area 1 configuration
Answer: B
NEW QUESTION 66
......
HPE6-A45 [Dec-2021] Newly Released] Exam Questions For You To Pass: https://www.torrentvce.com/HPE6-A45-valid-vce-collection.html