Get Fortinet NSE6_FNC-9.1 Dumps Questions [2024] To Gain Brilliant Result
NSE6_FNC-9.1 dumps - TorrentVCE - 100% Passing Guarantee
NEW QUESTION # 24
Which two of the following are required for endpoint compliance monitors? (Choose two.)
- A. Security rule
- B. Persistent agent
- C. Custom scan
- D. Logged on user
Answer: B,C
Explanation:
Explanation
DirectDefense's analysis of FireEye Endpoint attests that the products help meet the HIPAA Security Rule.
In the menu on the left click the + sign next to Endpoint Compliance to open it.
NEW QUESTION # 25
Refer to the exhibit.
Considering the host status of the two hosts connected to the same wired port, what will happen if the port is a member of the Forced Registration port group?
- A. The port will be administratively shut down.
- B. The port will be provisioned to the registration network, and both hosts will be isolated.
- C. The port will be provisioned for the normal state host, and both hosts will have access to that VLAN.
- D. The port will not be managed, and an event will be generated.
Answer: B
NEW QUESTION # 26
In which view would you find who made modifications to a Group?
- A. The Security Events view
- B. The Admin Auditing view
- C. The Event Management view
- D. The Alarms view
Answer: B
Explanation:
Explanation
It's important to audit Group Policy changes in order to determine the details of changes made to Group Policies by delegated users.
NEW QUESTION # 27
By default, if more than 20 hosts are seen connected on a single port simultaneously, what will happen to the port?
- A. The port is switched into the Dead-End VLAN.
- B. The port is disabled.
- C. The port becomes a threshold uplink.
- D. The port is added to the Forced Registration group.
Answer: C
Explanation:
Explanation
Admin Guide p. 754: Threshold Uplink-The Uplink mode has been set as Dynamic and FortiNAC has determined that the number of MAC addresses on the port exceeds the System Defined Uplink count. All hosts read on this port are ignored.
NEW QUESTION # 28
Which three are components of a security rule? (Choose three.)
- A. Trigger
- B. Security String
- C. User or host profile
- D. Methods
- E. Action
Answer: A,C,E
NEW QUESTION # 29
In a wireless integration, what method does FortiNAC use to obtain connecting MAC address information?
- A. RADIUS
- B. SNMP traps
- C. Endstation traffic monitoring
D Link traps
Answer: A
NEW QUESTION # 30
Which command line shell and scripting language does FortiNAC use for WinRM?
- A. Powershell
- B. DOS
- C. Linux
- D. Bash
Answer: A
Explanation:
Explanation
Open Windows PowerShell or a command prompt. Run the following command to determine if you already have WinRM over HTTPS configured.
NEW QUESTION # 31
By default, if after a successful Layer 2 poll, more than 20 endpoints are seen connected on a single switch port simultaneously, what happens to the port?
- A. The port becomes a threshold uplink
- B. The port is switched into the Dead-End VLAN
- C. The port is disabled
- D. The port is added to the Forced Registration group
Answer: A
NEW QUESTION # 32
What capability do logical networks provide?
- A. IVLAN -based inventory reporting
- B. Application of different access values from a single access policy
- C. Interactive topology view diagrams
- D. Point of access-baseautopopulationof device groups'
Answer: B
Explanation:
Explanation
Logical Networks allow you to create fewer Network Access Policies than before. (FortiNAC - What's new in FortiNAC 8.5)
NEW QUESTION # 33
What agent is required in order to detect an added USB drive?
- A. Dissolvable
- B. Persistent
- C. Passive
- D. Mobile
Answer: B
Explanation:
Explanation
Expand the Persistent Agent folder. Select USB Detection from the tree.
NEW QUESTION # 34
Where should you configure MAC notification traps on a supported switch?
- A. Configure them on all ports except uplink ports.
- B. Configure them only after you configure linkup and linkdown traps.
- C. Configure them on all ports on the switch.
- D. Configure them only on ports set as 802 1g trunks.
Answer: A
NEW QUESTION # 35
Which connecting endpoints are evaluated against all enabled device profiling rules?
- A. Rogues devices, each time they connect
- B. Rogues devices, only when they connect for the first time
- C. Known trusted devices each time they change location
- D. All hosts, each time they connect
Answer: A
Explanation:
Explanation
FortiNAC process to classify rogue devices and create an organized inventory of known trusted registered devices.
NEW QUESTION # 36
Which devices would be evaluated by device profiling rules?
- A. Rogue devices, only when they are initially added to the database
- B. Rogue devices, each time they connect
- C. Known trusted devices, each time they change location
- D. All hosts, each time they connect
Answer: B
NEW QUESTION # 37
Which two policy types can be created on a FortiNAC Control Manager? (Choose two.)
- A. Supplicant EasvConnect
- B. Network Access
- C. Authentication
- D. Endpoint Compliance
Answer: B,D
NEW QUESTION # 38
While troubleshooting a network connectivity issue, an administrator determines that a device was being automatically provisioned to an incorrect VLAN.
Where would the administrator look to determine when and why FortiNAC made the network access change?
- A. The Event view
- B. The Admin Auditing view
- C. The Connections view
- D. The Port Changes view
Answer: D
NEW QUESTION # 39
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?
- A. Only al-risk hosts would be impacted.
- B. Both types of enforcement would be applied.
- C. Only rogue hosts would be impacted.
- D. Both enforcement groups cannot contain the same port.
Answer: D
NEW QUESTION # 40
An administrator is configuring FortiNAC to manage FortiGate VPN users. As part of the configuration, the administrator must configure a few FortiGate firewall policies.
What is the purpose of the FortiGate firewall policy that applies to unauthorized VPN clients?
- A. To deny access to only the production DNS server
- B. To allow access to only the FortiNAC VPN interface
- C. To allow access to only the production DNS server
- D. To deny access to only the FortiNAC VPN interface
Answer: B
NEW QUESTION # 41
Where do you look to determine which network access policy, if any is being applied to a particular host?
- A. The Policy Logs view
- B. The Port Properties view of the hosts port
- C. The Policy Details view for the host
- D. The Connections view
Answer: C
Explanation:
Explanation
FortiNAC p 382: "Under Network Access Settings - Policy Name - Name of the Network Access Policy that currently applies to the host."
NEW QUESTION # 42
During the on-boarding process through the captive portal, what are two reasons why a host that successfully registered would remain stuck in the Registration VLAN? (Choose two.)
- A. There is another unregistered host on the same port.
- B. The port default VLAN is the same as the Registration VLAN.
- C. The wrong agent is installed.
- D. Bridging is enabled on the host.
Answer: A,B
NEW QUESTION # 43
......
Get 100% Passing Success With True NSE6_FNC-9.1 Exam: https://www.torrentvce.com/NSE6_FNC-9.1-valid-vce-collection.html
Premium Quality Fortinet NSE6_FNC-9.1 Online dumps: https://drive.google.com/open?id=1OD_rKjczTSP8UbWXokwqZvy3DatUExa6