Free NSK300 Exam Files Verified & Correct Answers Downloaded Instantly
Instant Download NSK300 Dumps Q&As Provide PDF&Test Engine
NEW QUESTION # 20
You deployed the Netskope Client for Web steering in a large enterprise with dynamic steering. The steering configuration includes a bypass rule for an application that is IP restricted. What is the source IP for traffic to this application when the user is on-premises at the enterprise?
- A. Netskope data plane gateway IPv4
- B. Loopback IPv4
- C. DHCP assigned RFC1918 IPv4
- D. Enterprise Egress IPv4
Answer: D
Explanation:
When a user is on-premises at the enterprise and accesses an application that is IP restricted, the source IP for traffic to this application is the Enterprise Egress IPv4 address.
The Enterprise Egress IP represents the external IP address of the enterprise network as seen by external services or applications.
This IP address is used for communication between the user's device and external resources, including applications that are IP restricted. Reference:
The answer is based on general knowledge of networking concepts and how IP addresses are used in enterprise environments.
NEW QUESTION # 21
Users in your network are attempting to reach a website that has a self-signed certificate using a GRE tunnel to Netskope. They are currently being blocked by Netskope with an SSL error. How would you allow this traffic?
- A. Ensure that the users add the self-signed certificate to their local certificate store.
- B. Set the No SNI setting in Netskope to Bypass.
- C. Configure a Do Not Decrypt SSL Decryption rule to allow traffic to pass.
- D. Configure a Real-time Protection policy with the action set to Allow.
Answer: C
Explanation:
To allow traffic from a website with a self-signed certificate that is being blocked by Netskope with an SSL error, the correct action is to configure aDo Not Decrypt SSL Decryption rule. This rule will allow the traffic to pass without being decrypted, thus bypassing the SSL error caused by the self-signed certificate.This is a common practice for handling traffic from trusted internal applications or specific external sites that use self- signed certificates1.
The Netskope Community Forum discusses the application of exceptions for sites with self-signed certificates and the use of SSL decryption policies to bypass the blocking1.Additionally, the Netskope Knowledge Portal provides information on managing error settings and configuring SSL decryption rules2.
NEW QUESTION # 22
You deployed Netskope Cloud Security Posture Management (CSPM) using pre-defined benchmark rules to monitor your cloud posture in AWS, Azure, and GCP. You are asked to assess if you can extend the Netskope CSPM solution by creating custom rules for each environment.
Which statement is correct?
- A. Custom rules using Domain Specific Language are only available when using SSPM.
- B. With Netskope CSPM, you can create custom rules using Domain Specific Language for AWS. Azure, but not for GCP.
- C. You will need to evaluate SaaS Security Posture Management (SSPM) in addition to CSPM so that rules applied to GCP will align with Google Workspace
- D. With Netskope CSPM, you can create custom rules using Domain Specific Language for AWS. Azure, and GCP
Answer: D
Explanation:
Netskope Cloud Security Posture Management (CSPM) allows for the creation of custom rules using Domain Specific Language (DSL) for all three major cloud platforms: AWS, Azure, and GCP. This capability is integral to CSPM and enables organizations to tailor their security posture assessments to their specific needs across different cloud environments.
The ability to create custom rules using DSL within Netskope CSPM for AWS, Azure, and GCP is documented in the Netskope Knowledge Portal. It provides detailed instructions on how to build custom rules under Policies > Security Posture > Profiles & Rules for security assessment of resources across these cloud platforms
NEW QUESTION # 23
You are deploying the Netskope Client to Windows devices. The following command line would be used to install the client MSI file:
In this scenario, what is <token> referring to in the command line?
- A. a private token given to you by the SCCM administrator
- B. a Netskope user identifier
- C. the URL of the IdP used to authenticate the users
- D. the Netskope organization ID
Answer: D
Explanation:
In the context of deploying the Netskope Client to Windows devices, <token> in the command line refers to the Netskope organization ID. This is a unique identifier associated with your organization's account within the Netskope security cloud. It is used during the installation process to ensure that client devices are registered and managed under the correct organizational account, enabling appropriate security policies and configurations to beapplied. References: The answer can be inferred from general knowledge about installing software clients and isn't directly available on Netskope's official resources.
NEW QUESTION # 24
You need to extract events and alerts from the Netskope Security Cloud platform and push it to a SIEM solution. What are two supported methods to accomplish this task? (Choose two.)
- A. Use the REST API.
- B. Use Cloud Ticket Orchestrator.
- C. Use Cloud Log Shipper.
- D. Stream directly to syslog.
Answer: A,C
Explanation:
To extract events and alerts from the Netskope Security Cloud platform and integrate them with a SIEM (Security Information and Event Management) solution, you can utilize the following supported methods:
* Cloud Log Shipper (CLS):
* The Cloud Log Shipper is designed to forward Netskope logs to external systems, including SIEMs.
* It allows you to export logs in real-time or batch mode to a destination of your choice.
* By configuring CLS, you can ensure that Netskope events and alerts are sent to your SIEM for further analysis and correlation.
Reference: Netskope Documentation on Cloud Log Shipper
REST API:
The Netskope Security Cloud provides a comprehensive REST API that allows you to programmatically retrieve data, including events and alerts.
You can use the REST API to query specific logs, incidents, or other relevant information from Netskope.
By integrating with the REST API, you can extract data and push it to your SIEM solution.
Reference: Netskope REST API Documentation
References:
Netskope Cloud Security
Netskope Resources
Netskope Documentation
These methods ensure seamless data flow between Netskope and your SIEM, enabling effective security monitoring and incident response.
NEW QUESTION # 25
You jus! deployed and registered an NPA publisher for your first private application and need to provide access to this application for the Human Resources (HR) users group only. How would you accomplish this task?
- A. 1. Enable private app steering in Tenant Steering Configuration.
2. Create a new private app and assign it to the HR user group. - B. 1. Enable private app steering in the Steering Configuration assigned to the HR group.
2. Create a new private app and assign it to the HR user group
3. Create a new Real-time Protection policy as follows:Source = HR user group Destination = Private App Action = Allow - C. 1. Create a new private app and assign it to the HR user group.
2. Create a new Real-time Protection policy as follows:
Source = HR user group Destination = Private App Action = Allow. - D. 1. Enable private app steering in the Steering Configuration assigned to the HR group.
2. Create a new Private App.
3. Create a new Real-time Protection policy as follows;
Source = HR user group Destination = Private App Action = Allow
Answer: B
Explanation:
To provide access to a private application for the Human Resources (HR) users group only after deploying and registering an NPA publisher, you would need to:
Enable private app steering in the Steering Configuration assigned to the HR group: This ensures that only traffic from the HR user group is steered towards the private application.
Create a new private app and assign it to the HR user group: This step involves defining the private application within Netskope and specifying that only the HR user group should have access to it.
Create a new Real-time Protection policy as follows:
Source = HR user group: This specifies that the policy applies to the HR user group.
Destination = Private App: This defines the private application as the destination for the policy.
Action = Allow: This action allows the HR user group to access the private application.
By following these steps, you can ensure that only the HR user group has access to the private application, aligning with the principles of least privilege and zero trust access control.
NEW QUESTION # 26
You are asked to create a Real-time Protection policy to inspect outbound e-mail for DLP violations. You must prevent sensitive e-mail from leaving the corporate mail relay.
In this scenario, which Real-time Protection policy action must be specified?
- A. Alert
- B. Forward to Proxy
- C. Block
- D. Add SMTP Header
Answer: D
NEW QUESTION # 27
You recently began deploying Netskope at your company. You are steering all traffic, but you discover that the Real-time Protection policies you created to protect Microsoft OneDrive are not being enforced.
Which default setting in the Ul would you change to solve this problem?
- A. Disable the default Microsoft appsuite SSL rule.
- B. Remove the default steering exception for domains.
- C. Remove the default steering exception for Cloud Storage.
- D. Disable the default certificate-pinned application
Answer: B
Explanation:
When deploying Netskope and steering all traffic, if you find that the Real-time Protection policies for Microsoft OneDrive are not being enforced, the likely issue is with the default steering exceptions. To resolve this, you should remove the default steering exception for domains . This is because the default exceptions may include domains related to Microsoft services, which could prevent the Real-time Protection policies from being applied to traffic directed towards OneDrive. By removing these exceptions, you ensure that all traffic, including that to OneDrive, is subject to the policies you have set up.
NEW QUESTION # 28
Review the exhibit.
A user has attempted to upload a file to Microsoft OneDrive that contains source code with Pll and PCI data.
Referring to the exhibit, which statement Is correct?
- A. The user will be blocked and a single Incident will be generated referencing the DLP-PCI profile.
- B. The user will be alerted and a single incident will be generated referencing the DLP-PII profile.
- C. The user will be blocked and a separate incident will be generated for each of the matching DLP profiles.
- D. The user will be blocked and a single Incident will be generated referencing all of the matching DLP profiles
Answer: D
NEW QUESTION # 29
Your company has a large number of medical forms that are allowed to exit the company when they are blank. If the forms contain sensitive data, the forms must not leave any company data centers, managed devices, or approved cloud environments. You want to create DLP rules for these forms.
Which first step should you take to protect these forms?
- A. Use Netskope Secure Forwarder to create EDM hashes of all forms.
- B. Use Netskope Secure Forwarder to create fingerprints of all forms.
- C. Use Netskope Secure Forwarder to create an ML Model of all forms
- D. Use Netskope Secure Forwarder to create an MIP tag for all forms.
Answer: B
Explanation:
The first step to protect the medical forms containing sensitive data is to create fingerprints of all forms using Netskope Secure Forwarder. Fingerprints are unique identifiers that can be used to detect when a form contains sensitive data. By creating fingerprints, you can set up DLP (Data Loss Prevention) rules that will allow blank forms to exit the company but will prevent forms with sensitive data from leaving the protected environments. This method ensures that only forms without sensitive information are allowed to be shared externally.
NEW QUESTION # 30
You want customers to configure Real-time Protection policies. In which order should the policies be placed in this scenario?
- A. CASB, RBI, Threat, Web
- B. Threat, RBI, CASB, Web
- C. Threat, CASB, RBI, Web
- D. RBI, CASB, Web, Threat
Answer: D
Explanation:
When configuring Real-time Protection policies in Netskope, the recommended order is as follows:
RBI (Risk-Based Index) Policies: These policies focus on risk assessment and prioritize actions based on risk scores. They help identify high-risk activities and users.
CASB (Cloud Access Security Broker) Policies: These policies address cloud-specific security requirements, such as controlling access to cloud applications, enforcing data loss prevention (DLP) rules, and managing shadow IT.
Web Policies: These policies deal with web traffic, including URL filtering, web categories, and threat prevention.
Threat Policies: These policies focus on detecting and preventing threats, such as malware, phishing, and malicious URLs.
Placing the policies in this order ensures that risk assessment and cloud-specific controls are applied before addressing web and threat-related issues. Reference:
Netskope Security Cloud Introductory Online Technical Training
Netskope Security Cloud Operation & Administration (NSCO&A) - Classroom Training Netskope Certification Description Netskope Architectural Advantage Features
NEW QUESTION # 31
You are implementing Netskope Cloud Exchange in your company lo include functionality provided by third- party partners. What would be a reason for using Netskope Cloud Risk Exchange in this scenario?
- A. to automate service tickets from alerts of interest
- B. to map multiple scores to a normalized range
- C. to feed SOC with detection and response services
- D. to ingest events and alerts from a Netskope tenant
Answer: A
Explanation:
The reason for using Netskope Cloud Risk Exchange in this scenario is toautomate service tickets from alerts of interest. Netskope Cloud Risk Exchange (CRE) is designed to ingest user, device, and application risk scores, creating a dashboard view of contributors to your company's overall risk score and trend. One of the key functionalities of CRE is to trigger risk-reducing actions through business rules that are tuned to a weighted score.Automating service tickets from alerts of interest is a part of this functionality, as it allows for the automatic creation of tickets in response to specific alerts, streamlining the process of addressing potential security issues12.
The use cases for Netskope Cloud Risk Exchange, including the automation of service tickets, can be found in the official Netskope resources1.Further information on how to integrate and utilize Netskope Cloud Risk Exchange for automating service tickets can be found in the Netskope Knowledge Portal3.
NEW QUESTION # 32
Review the exhibit.
You created an SSL decryption policy to bypass the inspection of financial and accounting Web categories.
However, you still see banking websites being inspected.
Referring to the exhibit, what are two possible causes of this behavior? (Choose two.)
- A. An incorrect category has been selected
- B. The policy is in a "pending changes" state.
- C. An incorrect action has been specified.
- D. The policy is in a "disabled" state.
Answer: A,C
NEW QUESTION # 33
You have users connecting to Netskope from around the world You need a way for your NOC to quickly view the status of the tunnels and easily visualize where the tunnels are located Which Netskope monitoring tool would you use in this scenario?
- A. Network Steering in Digital Experience Management
- B. Network Events in Skope IT
- C. Web Usage Summary in Advanced Analytics
- D. Alerts in Skope IT
Answer: A
Explanation:
Network Steering in Digital Experience Management is the appropriate Netskope monitoring tool for this scenario. It allows the Network Operations Center (NOC) to quickly view the status of the tunnels and provides an easy way to visualize the locations of the tunnels. This tool is designed to give a clear overview of network health and performance, which is essential for managing global connectivity and ensuring the reliability of the service.
The use of Network Steering in Digital Experience Management for monitoring tunnel status and location visualization is supported by Netskope's documentation on secure web gateway use cases and best practices for deployment and validation of IPSec/GRE tunnels
NEW QUESTION # 34
You have multiple networking clients running on an endpoint and client connectivity is a concern. You are configuring co-existence with a VPN solution in this scenario, what is recommended to prevent potential routing issues?
- A. Configure the VPN to split tunnel traffic by adding the Netskope IP and Google DNS ranges and set to Exclude in the VPN configuration.
- B. Configure the VPN to full tunnel traffic and add an SSL Do Not Decrypt policy to the VPN configuration for all Netskope traffic.
- C. Configure a Network Location with the VPN IP ranges and add it as a Steering Configuration exception.
- D. Modify the VPN to operate in full tunnel mode at Layer 3. so that the Netskope agent will always see the traffic first.
Answer: D
Explanation:
* To prevent potential routing issues and ensure that the Netskope agent consistently sees the traffic first, it is recommended to modify the VPN to operate in full tunnel mode at Layer 3.
* In full tunnel mode, all traffic from the endpoint is routed through the VPN, including traffic destined for Netskope. This ensures that the Netskope agent can inspect and apply policies to all traffic, regardless of the destination.
* Layer 3 full tunnel mode provides better visibility and control over the traffic flow, reducing the risk of routing conflicts or bypassing the Netskope inspection. References:
* The answer is based on general knowledge of VPN configurations and their impact on traffic routing.
NEW QUESTION # 35
Review the exhibit.
AcmeCorp has recently begun using Microsoft 365. The organization is concerned that employees will start using third-party non-AcmeCorp OneDrive instances to store company data. The CISO asks you to use Netskope to create a policy that ensures that no data is being uploaded to non-AcmeCorp instances of OneDrive.
Referring to the exhibit, which two policies would accomplish this posture? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C,D
Explanation:
To ensure that no data is uploaded to non-AcmeCorp instances of OneDrive, the policies that would accomplish this are:
* Policy B: This policy allows traffic only for AcmeCorp's OneDrive and blocks all other Microsoft 365 Suite traffic. It ensures that data is not uploaded to non-AcmeCorp OneDrive instances by restricting access to only the corporate instance of OneDrive.
* Policy C: This policy allows traffic for AcmeCorp's Microsoft 365 Suite but blocks all other OneDrive for Business traffic. It achieves the same outcome by permitting corporate suite usage while preventing uploads to any OneDrive for Business instances that are not part of AcmeCorp.
These policies are designed to provide granular control over the data flow, ensuring that company data remains within the corporate environment and is not transferred to external or personal storage solutions.
The policies are based on Netskope's capabilities for real-time protection and data security, which allow organizations to enforce granular access and control policies. The information aligns with the best practices for setting up such policies as described in Netskope's documentation and resources
NEW QUESTION # 36
You are attempting to merge two Advanced Analytics reports with DLP incidents: Report A with 3000 rows and Report B with 6000 rows. Once merged, you notice that the merged report is missing a significant number of rows.
What is causing this behavior?
- A. Missing data is due to viewing limits.
- B. Netskope automatically deduplicates data in merged reports.
- C. Visualizations have a system limit of 5000 rows.
- D. Filters are applied differently to dimensions and measures
Answer: A
Explanation:
When merging two Advanced Analytics reports in Netskope, if the merged report is missing rows, it is likely due to viewing limits within the system. Netskope's Advanced Analytics platform has limitations on the number of rows that can be viewed at once, which can result in missing data when dealing with large reports. This viewing limit ensures performance and manageability of the data within the system.
NEW QUESTION # 37
......
Exam Valid Dumps with Instant Download Free Updates: https://www.torrentvce.com/NSK300-valid-vce-collection.html
Fast Exam Updates NSK300 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1_heDSpaQH_wNsVv5BbbG87xfepj0cqBw