Free HPE6-A73 Exam Study Guide for the NEW [Nov-2022] Dumps Test Engine
HPE6-A73 PDF Dumps Extremely Quick Way Of Preparation
The benefit in Obtaining the Hewlett Packard Enterprise Aruba Certified Switching Professional Exam
On the off chance that you need to upgrade your vocation as a systems administration proficient, you can help your odds and your chances with this affirmation. You can find network engineer occupations explicitly for the individuals who have abilities and information on Aruba organizations, just as show that you have an expansive information on systems administration. Find both lasting business and independent freedoms, just as maybe occupations with Aruba themselves.
In the event that you need to quit being utilized and view self as work all things being equal, you can find a colossal scope of independent freedoms. Field Engineer associates independent organization engineers with organizations searching for talented people with adaptable timetables. Associations need capable experts who can demonstrate their abilities and offer them magnificent worth when they have an undertaking or even need a drawn out responsibility.
Our HP HPE6-A73 exam dumps are a direct strategy to get familiar with about the test and about the association of the test. You can use it to get insisted and gather.
NEW QUESTION 46
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG interfaces are in layer-3 mode
- B. The VSX LAG hash does not match the remote peer
- C. Local optimization was not enabled on the VSX LAG
- D. LACP was enabled in active mode on the VSX LAG
Answer: B
NEW QUESTION 47
An administrator has an AOS-CX switch configured with:
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 48
Which concept is implemented using Aruba's dynamic segmentation?
- A. Device fingerprinting
- B. Root of trust
- C. Zero Touch Provisioning
- D. Colorless port
Answer: D
NEW QUESTION 49
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 1 has 23 routes
- C. Core1 has received one LSA Type 5 from the ASBR
- D. Area 0 has 13 routes
Answer: B
NEW QUESTION 50
An administrator is implementing a multicast solution in a multi-VLAN network Which statement is true about theconfiguration of the switches in the network?
- A. IGMP must be enabled on alt interfaces where multicast sources and receivers are connected
- B. IGMP must be enabled on all routed interfaces where multicast traffic will traverse
- C. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic
- D. IGMP requires join and leave messages to graft and prune multicast streams between switches
Answer: D
NEW QUESTION 51
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. Define the account to implement change of authorization.
- B. Speed up the AAA authentication process
- C. Define the account to implement downloadable user roles
- D. implement replay protection for AAA messages
Answer: B
NEW QUESTION 52
An administrator is implementing a multi-area OSPF network. The network contains a backbone (area 0) and two other areas (1 and 2) connected to ABRs in the backbone The network has one routing switch connected to a service provider located in area 2 Which network design would minimize the number of routes in the routing switches' link state databases (LSDBs) while still allowing full connectivity?
- A. Area 0: Normal
Area 1: Totally stubby Area 2: Totally stubby - B. Area 0: Normal
Area 1: Totally stubby
Area 2: Totally not-so-stubby - C. Area 0: Normal
Area 1: Totally not-so-stubby Area 2: Totally stubby - D. Area 0: Not-so-stubby
Area 1: Totally not-so-stubby Area 2: Totally not-so-stubby
Answer: D
NEW QUESTION 53
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. MAC authentication has passed, but 802.1X authentication is in progress
- B. No downloadable user role exists
- C. The port should be configured for 802.1X
- D. The RADIUS request timed out to the AAA server
Answer: C
NEW QUESTION 54
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. 802.1X must be configured to work in fallback mode
- B. Device fingerprinting is required for authentication
- C. The client-limit setting for port access needs to be changed
- D. Device mode should be implemented
Answer: A
NEW QUESTION 55
Examine the VSX-related configuration of the core layer AOS-CX switch:
A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches.
Which configuration should the administrator add to the core switch to fix this issue?
- A. ICX-Tx-Core1(config)# interface 1/1/45
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 192.168.0.0 mac 02:02:00:00:01:00 - B. ICX-Tx-Core1(config)# interface 1/1/46-1/1/47
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 10.1.11.1 mac 02:02:00:00:01:00 - C. ICX-Tx-Core1(config)# vsx
ICX-Tx-Core1(config-vsx)# system-mac 02:01:00:00:01:00 - D. ICX-Tx-Core1(config)# interface lag 1 multi-chassis
ICX-Tx-Core1(config-if-lag-if)# mtu 9198
Answer: A
NEW QUESTION 56
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. DHCP
- B. LLDP
- C. ARP
- D. ICMP
Answer: B
NEW QUESTION 57
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Remove a script that is no longer used before installing the new script
- B. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
- C. Install the script's signature before installing the new script
- D. Enable trust settings for the AOS-CX switch's SSL certificate
Answer: A
NEW QUESTION 58
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement route aggregation
- B. Reduce the hello and dead interval timers
- C. Implement graceful restart
- D. Implement bidirectional forwarding detection (BFD)
Answer: D
Explanation:
"BFD tests the connectivity between two IP addresses in a BFD session. BFD reports when connectivity is lost. The router (or routing switch) can then use that information to take the appropriate actions, depending on the functions to which you have tied BFD"
NEW QUESTION 59
What must a network administrator implement in order to run an NAE script on an AOS-CX switch?
- A. Plan
- B. Agent
- C. Deployment
- D. Schedule
Answer: B
NEW QUESTION 60
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By placing it in the strict priority queue
- B. By implementing weighted fair queueing (WFQ)
- C. By implementing voice VLANs
- D. By defining device profiles with QOS settings
Answer: C
NEW QUESTION 61
Examine the network topology.
Based on the above information, what is correct?
- A. Corel has received one LSA Type 5 from the ASBR
- B. Corel has no OSPF routes.
- C. Area 0 has 13 routes.
- D. Area 1 has 23 routes
Answer: C
NEW QUESTION 62
An administrator wants to implement dynamic segmentation policies. The network consists of AOS-CX and Aruba gateways.
Which type of forwarding should the administrator implement for users that already connect via wireless, but will also be connecting on Ethernet switch ports?
- A. Switch-to-switch tunneling (SST)
- B. User-based tunneling (UBT)
- C. Port-based tunneling (PBT)
- D. Local switching
Answer: B
NEW QUESTION 63
An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. install AOS-CX 6300 or 6400 switches with always-on POE.
- B. Install the in-service software upgrade (ISSU) feature with clustering enabled
- C. Implement VSX on the AOS-CX access switches
- D. Implement VSF on the AOS-CX access switches
Answer: A
NEW QUESTION 64
......
Enhance your career with HPE6-A73 PDF Dumps - True HP Exam Questions: https://www.torrentvce.com/HPE6-A73-valid-vce-collection.html
Download HPE6-A73 Dumps (2022) - Free PDF Exam Demo: https://drive.google.com/open?id=158hVMnk91Y1AO8X8Yw_G3mDKJmcwYL-h