[Feb-2022] F5 301 Dumps - Secret To Pass in First Attempt
F5 301 Exam Dumps [2022] Practice Valid Exam Dumps Question
How much 301a - LTM Technology Specialist Cost
The price of 301a - LTM Technology Specialist is $150 USD.
NEW QUESTION 12
Why would an administrator capture monitor traffic between a BIG-IP and servers?
- A. Viewing monitor traffic could help the administrator to define a more robust monitor.
- B. Only client traffic may be captured; monitor traffic may not be captured.
- C. If client traffic to servers was failing, viewing and analyzing monitor traffic would determine the reason.
- D. If a client were having difficulty logging into a load-balanced SSH server, viewing and analyzing the connection process would determine the reason.
Answer: A
NEW QUESTION 13
The partial configuration below includes an iRule, a virtual server, and pools. When traffic from the client at 160.10.10.10:2056 connects to the virtual server Test_VS and sends an HTTP request, what will the client's source address be translated to as the traffic is sent to the chosen pool member? pool Test_Pool { member
10.10.10.10:80 member 10.10.10.11:80 } snatpool lower_range { member
10.10.10.1 } snatpool upper_range { member 10.10.10.2 } rule Test_iRule { when CLIENT_ACCEPTED. { if { [TCP::local_port]
< 2024 }{ snatpool lower_range } else { snatpool upper_range } virtual Test_VS { destination 200.10.10.1 :http pool Test_Pool rule Test_i Rule }
- A. 200.10.10.1200.10.10.1
- B. 10.10.10.2
- C. 10.10.10.1
- D. 160.10.10.IOC.160.10.10.10
- E. It could be either 10.10.10.10 or 10.10.10.11.E.It could be either 10.10.10.10 or 10.10.10.11.
Answer: C
NEW QUESTION 14
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the graphic below. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.10.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- B. Source IP: 172316.20.50; Destination IP: pool member in the 182.16/16 network
- C. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168/16 network
- D. Source IP: 182.16.1.1; Destination IP: pool member in the 172316/16 network
- E. Source IP: 192.168.1.1; Destination IP: pool member in the 192.168/16 network
- F. The request will be dropped.
- G. Source IP: 10.20.10.50; Destination IP: pool member in the 172.16/16 network
- H. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168./16 network
Answer: D
NEW QUESTION 15
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?
- A. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.
- B. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
- C. This assignment is not allowed since the port do not match.
- D. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
Answer: A
NEW QUESTION 16
An LTM has the 3 virtual servers, a SNAT, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the destination IP address?
- A. Destination IP: pool member in the 192.168/16 network.
- B. Destination IP: 10.10.2.10
- C. The request will be dropped.
- D. Destination IP: pool member in the 172.16/16 network
Answer: B
NEW QUESTION 17
Which statement concerning virtual servers is true?
- A. Virtual servers can compress data between the BIG-IP and servers.
- B. Virtual servers cannot perform load balancing without performing address translation.
- C. Virtual servers can reuse connections between the BIG-IP and server for multiple HTTP GETs.
- D. Virtual servers can keep idle server connections open indefinitely.
- E. Virtual server processing always translates the virtual server address to the address of the chosen pool member.
Answer: C
NEW QUESTION 18
Which is the result when multiple monitors are assigned to a pool member?
- A. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).
- B. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.
- C. The member is marked as available if any of the monitors succeed.
- D. The member is marked as unavailable if any of the monitors fails.
Answer: B
NEW QUESTION 19
Which statement is true concerning SNATs using SNAT pools and SNATs using automap?
- A. SNAT s using automap preferentially translate source addresses to non-floating self-IP addresses.
- B. SNAT s using automap translate source addresses randomly to any of the BIG-IP's floating self-IP addresses.
- C. SNAT s using a SNAT pool translate source addresses randomly to any of the addresses in the SNAT pool.
- D. A .SNAT pool can contain virtual server addresses.
Answer: A
NEW QUESTION 20
Could an iRule perform persistence based on a cookie?
- A. Yes. An iRule could be desiged to persist based on the contents of a cookie.
- B. No. Cookie persistence is only is based on a cookie persistence profile.
- C. Yes An iRule could be designed to persist based on the contents of a cookie.
- D. No. iRules cannot affect persistence.
Answer: A
NEW QUESTION 21
A BIG-IP has two SNATs, a pool of DNS servers and a virtual server configured to load-balance UDP traffic to the DNS servers. One SNAT's address is 64.100.130.10; this SNAT is defined for all addresses.
The second SNAT's address is 64.100.130.20; this SNAT is
defined for three specific addresses, 172.16.3.54, 172.16.3.55, and 172.16.3.56. The virtual server's destination is
64.100.130.30:53.
The SNATs and virtual server have default VLAN associations. If a client with IP address 172.16.3.55 initiates a request to the virtual server, what is the source IP address of the packet as it reaches the chosen DNS server?
- A. 64.100.130.30
- B. 64.100.130.10
- C. 64.100.130.20
- D. 172.16.3.55
Answer: C
NEW QUESTION 22
The following iRule is being used within a persistence profile on a virtual server. Assuming the following HTTP requests are made within the same timeout window, what is the maximum number of persistence records that will be created iRule: rule Persist_Universal { when HTTP_REQUEST { persist uie [findstr [HTTP::uri] "?" 8 3] } Requests:#1 http: I/www.test.com/input.html?testl 45ABR80 #2 http ://www.test.com/input .html?testl 35PDC72 #3 http :llwww.test. com/input.html?testl 25ABR76 #4 http ://www.test.com/input.html?testl
45MN088 #5 http ://www.test. com/input.html?testl 55ABR98 #6 http ://www.test.com/input.html?testl 45 PDC6O #7 http ://www.test. com/input.html?testl 75ABC50 #8 http ://www.test.com/input.html?testl 25MN055 #9 http: llwww.test. com/input.html?testl 45ABC70 #10 http ://www.test.com/input.html?testl 35PDC42
- A. 0
- B. 1
- C. 2
- D. It cannot be determined from the given data.
- E. 3
- F. 4
- G. 5
Answer: C
NEW QUESTION 23
Which two processes are involved when BIG-IP systems issue traps? (Choose two.)
- A. alertd
- B. bigd
- C. smtpd
- D. syslog-ng
Answer: A,D
NEW QUESTION 24
When defining a load-balancing pool using the command line, if the load-balancing method is not specified, what is the result
- A. The load-balancing method of the previous pool would be used.
- B. An error would be displayed since no load-balancing method was specified.
- C. The system would prompt the user for a load-balancing method.
- D. The default load-balancing method would be used.
Answer: D
NEW QUESTION 25
A site wishes to use an external monitor. Other than what is coded in the monitor script, what information must be configured on the BIG-IP for the monitor to be functional? (Choose two.)
- A. BIG-IP must know the name of the program.
- B. BIG-IP must know which function the program is going to test. Must know
- C. BIG-IP node or member the result are to be applied to. Must know all
- D. BIG-IP services that are running on the system to be tested.
- E. BIG-IP the IP addresses of the devices that will be tested. Must know which
Answer: A,C
NEW QUESTION 26
Which persistence method will always recognize a client when the client returns to the same virtual server?
- A. source address
- B. SSL
- C. No persistence method work in all situations.
- D. expression [universal]
- E. MSRDP
Answer: C
NEW QUESTION 27
Which tool is used on BIG-IP systems to capture data packets?
- A. qkview
- B. ethereal
- C. snoop
- D. tcpdump
Answer: D
NEW QUESTION 28
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. any bytes within the initial client request packet
- B. any text string within a cookie
- C. an IP address
- D. the value in the tcp acknowledgement field
Answer: B,C
NEW QUESTION 29
After editing and saving changes to the configuration file containing virtual servers,
what is the immediate result?
- A. The new configuration is verified
- B. The new configuration is verified and loaded if is it syntactically correct.
- C. The new configuration is neither verified nor loaded.
- D. The new configuration is verified and loaded.
- E. The new configuration is loaded but not verified.
- F. The new configuration is verified not loaded.
Answer: C
NEW QUESTION 30
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{priority- group 2}}
- B. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {170.16.20.1:80}
- C. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{} }
- D. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80}
Answer: B
NEW QUESTION 31
......
301 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.torrentvce.com/301-valid-vce-collection.html