Excellent NSE5_FAZ-7.0 Updated 2023 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Fortinet NSE5_FAZ-7.0
The Fortinet NSE5_FAZ-7.0 certification exam is a globally recognized certification program that focuses on Fortinet's FortiAnalyzer 7.0 enterprise-level network security and analysis solution. This certification is designed for network security professionals who want to validate their skills and knowledge of deploying, configuring, and managing FortiAnalyzer 7.0 in complex network environments.
The Fortinet NSE5_FAZ-7.0 certification exam is a comprehensive exam that covers a wide range of topics, including FortiAnalyzer deployment scenarios, log collection and analysis, reporting and alerting, and event management. The exam is designed to test the candidate's understanding of key concepts and their ability to apply that knowledge in real-world scenarios.
NEW QUESTION # 25
What are offline logs on FortiAnalyzer?
- A. Logs that are indexed and stored in the SQL database.
- B. Compressed logs, which are also known as archive logs, are considered to be offline logs.
- C. Logs that are collected from offline devices after they boot up.
- D. When you restart FortiAnalyzer. all stored logs are considered to be offline logs.
Answer: B
NEW QUESTION # 26
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports?
- A. ORDER BY
- B. WHERE
- C. FROM
- D. LIMIT
Answer: C
NEW QUESTION # 27
Refer to the exhibits.
How many events will be added to the incident created after running this playbook?
- A. Ten events will be added.
- B. Thirteen events will be added.
- C. Five events will be added.
- D. No events will be added.
Answer: C
NEW QUESTION # 28
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. Raw logs are reaching FortiAnalyzer faster than they can be indexed
- B. The sqlplugind daemon is behind in log indexing by two logs
- C. Logs are being dropped
- D. The received rate is almost at its maximum for this device
Answer: A
NEW QUESTION # 29
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The security event risk is considered open.
- B. An incident was created from this event.
- C. The security risk was blocked or dropped.
- D. The risk source is isolated.
Answer: C
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 206
NEW QUESTION # 30
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Shut down FortiAnalyzer and then replace the disk
- B. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- C. Perform a hot swap
- D. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
Answer: A
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20hot%20swapping
NEW QUESTION # 31
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)
- A. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
- B. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.
- C. Logs will be presented in both ADOMs immediately after the move.
- D. Archived logs will be moved to ADOM1 from the root ADOM automatically.
Answer: B,D
NEW QUESTION # 32
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)
- A. When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.
- B. By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting
- C. Collector mode is the default operating mode.
- D. When in collector mode. FortiAnalyzer supports event management and reporting features.
Answer: A,B
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/312644/analyzer-collector-collaboration
NEW QUESTION # 33
Refer to the exhibits.
How many events will be added to the incident created after running this playbook?
- A. Thirteen events will be added.
- B. Five events will be added.
- C. No events will be added.
- D. Ten events will be added.
Answer: D
NEW QUESTION # 34
For which two purposes would you use the command set log checksum? (Choose two.)
- A. To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server
- B. To encrypt log communications
- C. To prevent log modification or tampering
- D. To send an identical set of logs to a second logging server
Answer: A,C
Explanation:
To prevent logs from being tampered with while in storage, you can add a log checksum using the config system global command. You can configure FortiAnalyzer to record a log file hash value, timestamp, and authentication code when the log is rolled and archived and when the log is uploaded (if that feature is enabled). This can also help against man-in-the-middle only for the transmission from FortiAnalyzer to an SSH File Transfer Protocol (SFTP) server during log upload.
FortiAnalyzer_7.0_Study_Guide-Online page 149
NEW QUESTION # 35
Which statement is true regarding Macros on FortiAnalyzer?
- A. Macros are useful in generating excel log files automatically based on the reports settings.
- B. Macros are predefined templates for reports and cannot be customized.
- C. Macros are supported only on the FortiGate ADOM.
- D. Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.
Answer: D
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 283: Note that macros are ADOM-specific and supported in FortiGate and FortiCarrier ADOMs only.
NEW QUESTION # 36
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all registered devices should:
- A. Use host name resolution
- B. Use an NTP server
- C. Use DNS
- D. Use real-time forwarding
Answer: B
NEW QUESTION # 37
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server?
(Choose two.)
- A. Mail server
- B. SFTP, FTP, or SCP server
- C. Output profile
- D. Report scheduling
Answer: B,C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating-output-profiles
NEW QUESTION # 38
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector?
- A. FortiOS Event Log
- B. FortiAnalyzer Event Handler
- C. Incoming webhook
- D. Fabric Connector event
Answer: C
Explanation:
"One possible scenario is shown on the slide:
1. Traffic flows through the FortiGate
2. FortiGate sends logs to FortiAnalyzer
3. FortiAnalyzer detects some suspicious traffic and generates an event
4. The event triggers the execution of a playbook in FortiAnalyzer, which sends a webhook call to FortiGate so that it runs an automation stitch
5. FortiGate runs the automation stitch with the corrective or preventive actions" FortiAnalyzer_7.0_Study_Guide-Online page 228 In order to see the actions related to the FOS connector, you must enable an automation rule using the Incoming Webhook Call trigger on the FortiGate side. FortiAnalyzer_7.0_Study Guide page no 233
NEW QUESTION # 39
What is the purpose of the following CLI command?
- A. To encrypt log communications
- B. To add the MD's hash value and authentication code
- C. To add a log file checksum
- D. To add a unique tag to each log to prove that it came from this FortiAnalyzer
Answer: C
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 40
What is the purpose of the following CLI command?
- A. To encrypt log communications
- B. To add the MD's hash value and authentication code
- C. To add a log file checksum
- D. To add a unique tag to each log to prove that it came from this FortiAnalyzer
Answer: C
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 41
Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.)
- A. Both modes, forwarding and aggregation, support encryption of logs between devices.
- B. Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
- C. Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
- D. In aggregation mode, you can forward logs to syslog and CEF servers as well.
Answer: B,C
NEW QUESTION # 42
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)
- A. Mail server
- B. SFTP server
- C. Output profile
- D. Report scheduling
Answer: A,C
NEW QUESTION # 43
What are two of the key features of FortiAnalyzer? (Choose two.)
- A. Centralized log repository
- B. Virtual domains (VDOMs)
- C. Reports
- D. Cloud-based management
Answer: A,C
NEW QUESTION # 44
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?
- A. Log upload
- B. Log forwarding an aggregation mode
- C. Log fetching
- D. Indicators of Compromise
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management
NEW QUESTION # 45
Which daemon is responsible for enforcing raw log file size?
- A. sqlplugind
- B. oftpd
- C. logfiled
- D. miglogd
Answer: C
NEW QUESTION # 46
......
Fortinet NSE 5 - FortiAnalyzer 7.0 Certification Sample Questions and Practice Exam: https://www.torrentvce.com/NSE5_FAZ-7.0-valid-vce-collection.html
Real Exam Questions and Answers - Fortinet NSE5_FAZ-7.0 Dump is Ready: https://drive.google.com/open?id=1rFrfxZGw_sMRaCw6EdLJqKtGR3IBZhrJ