CT-TAE Exam Info and Free Practice Test Professional Quiz Study Materials
Accurate Hot Selling CT-TAE Exam Dumps 2023 Newly Released
The Certified Tester Test Automation Engineer (CT-TAE) exam is a globally recognized certification program offered by the International Software Testing Qualifications Board (ISTQB). Certified Tester Test Automation Engineer certification is designed to enhance the skills and knowledge of professionals involved in test automation. The CT-TAE certification validates the ability to design, develop, and maintain automated tests, as well as the ability to analyze and optimize automated test cases and test suites.
The CT-TAE certification is highly valued in the software testing industry, as it demonstrates that the candidate has the required knowledge and skills to work effectively in a test automation environment. It is also recognized globally, which means that certified professionals can work in any part of the world. Furthermore, the certification is an excellent way to showcase one's expertise and credibility, which can lead to better job opportunities and higher salaries.
ISTQB CT-TAE (Certified Tester Test Automation Engineer) certification exam is a globally recognized certification program designed for professionals who specialize in test automation. Certified Tester Test Automation Engineer certification is issued by the International Software Testing Qualifications Board (ISTQB), an organization that provides a standard framework for software testing professionals across the world. The CT-TAE certification program is aimed at individuals who possess a good understanding of software testing and have experience in designing, developing and maintaining automated test scripts and frameworks. Certified Tester Test Automation Engineer certification program is intended to validate the knowledge and skills of professionals in the field of test automation and to provide them with a competitive edge in the job market.
NEW QUESTION # 25
If you are tracking the frequency that a test automation code reports a defect that is not really a defect, what metric are you gathering?
- A. Automation code defect density
- B. Trend metrics
- C. Tool scripting metrics
- D. The number of false-fail results
Answer: D
NEW QUESTION # 26
Which of the following describes how a test execution report is likely to be used?
- A. To understand which test step caused the failure in a test case
- B. To identify problematic areas of the SUT by keeping a history showing which test cases fail the most
- C. To measure coverage of the test basis by a test suite
- D. To record how a test case failure has been fixed
Answer: B
NEW QUESTION # 27
Consider a TAS that is going to be deployed for the first time. The TAS requires share resources and run it its own test environment. The infrastructure for the TAS has been created along with maintenance procedures. It is very unlikely the TAS will be required to work in other target Environments. There is a high-risk that when the TAS is deployed in its own test environment, a number of existing application will no longer work because of conflicts with the existing shared resources.
Which of the following activities would you expect to be MOST effective at mitigating the risk associated with the first deployment of the TAS?
- A. Testing the TAS for application compatibility issues in the target environment
- B. Testing the TAS for regressions due to optimization that fix non-functional issues.
- C. Testing the TAS for its ability to be implemented in other target test environments.
- D. Testing the TAS for ITS ability to run a shared test environment
Answer: C
NEW QUESTION # 28
What are the four horizontal layers of the gTAA?
- A. Test definition, test execution, test reporting, test adaptation
- B. Test generation, test execution, test definition, test APIs
- C. Test generation, test definition, test execution, test adaptation
- D. Test adaptation, test execution, test design, test definition
Answer: C
NEW QUESTION # 29
Your project is transitioning from manual to automated testing. You have decided to implement a pilot project so that lessons learned can inform future time estimates and schedules.
Which two of the following represent the types of test cases that are MOST suited to a test automation pilot project?
a) High added value test cases that require little effort to automate.
b) Test that are run infrequently as these will be simpler to automate
c) Reliability test cases that can show added value soon
d) Technically challenging test cases to provide the best validation of manual test conversion e) Tests that are least Important to the business as these are safer to trial
- A. b and d
- B. a and b
- C. c and e
- D. a and c
Answer: D
NEW QUESTION # 30
Which of the following statement about the implementation of automated regression testing is FALSE?
- A. When automating regression tests, consideration should be given to how much time would be saved by automation
- B. When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly
- C. When automating regression tests, the structure of automated tests must always be the same as the corresponding manual tests
- D. When automating regression tests, the initialization steps set the test preconditions should be automated wherever possible
Answer: A
NEW QUESTION # 31
Your company is new to test automation and as TAE. you have designed a TAS which successfully supports the SUT for the current project.
There are other systems currently in operation which have been tested manually and more systems are planned over the coming years. Based on this success, your company requires test automation be rolled out to other current and future SUTs with consistency being a key objective.
Which of the following is the BEST way to achieve that?
- A. Install the current TAS into a central repository so that other tests on different SUTs use the same version of the TAS.
- B. Develop a tool that keeps track of automation failures across the different SUTs and produces regular reports to stakeholders.
- C. Design a new TAS for each SUT, and manage each one through a dedicated automation support team.
- D. Check for correct connectivity to internal and external systems to ensure that the TAS has been installed and configured correctly for each SUT.
Answer: A
NEW QUESTION # 32
Your functional regression test automation suite ran successfully for the first two sprints and no failures were encountered during the runs. The automation suite records the status of each test case as either 'pass' or 'fail' and has excellent recovery capability built in.
For the third sprint, the TAS log reported several test cases with a status of 'fail'. You investigated each test case and found that most failures were due to a defect in one of the keyword scripts, rather than in the SUT. For those where the failure was in the SUT, defect reports were raised but several were returned by the developers asking for more information to enable them to reproduce the problem.
Which additional log items SHOULD you add to the TAS that would BEST improve failure analysis and defect reporting for future sprints?
a) Dynamic measurement information about the SUT.
b) A status of TAS error', in additional to pass' and 'fail', for each test case.
c) Use of a colour coding scheme so that 'pass' is in red and fail' is in green.
d) A counter to determine how many times each test case has been executed.
e) System configuration information including software/firmware and operating system versions.
f) A copy of the source code for all Keyword scripts executed.
- A. b and e
- B. a and c
- C. a and b
- D. d and e
Answer: D
NEW QUESTION # 33
You are working as a TAE for a company who are re-designing their website. The new website provides information for customers and there are two minor features being developed:
1) Request a newsletter
2) Ability to contact the organisation with a question or comment
The website must be "mobile friendly" and available on all major web browsers.
You have been tasked to provide an automated solution for web browsers only and to concentrate on the two minor features.
What would be a KEY challenge with automation in this context?
- A. A low level of intrusion is likely from use of existing UI elements, but depending on the solution this might be more complex than a higher level of intrusion.
- B. Because there is a high level of intrusion there may be many false alarms.
- C. The benefits of automation might not be achieved for many years due to the complexities of the SUT and automation solution.
- D. Automation might not be possible on the mobile devices.
Answer: C
NEW QUESTION # 34
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The defect density in the automation code of the regression test suite.
- B. The ratio of comments to executable statements in the SUT code.
- C. The SUT code coverage provided by the execution of the regression test suite.
- D. The ratio of commands to executable statements in the automation code of the regression test suite
Answer: C
NEW QUESTION # 35
You are the TAE for an Agile project which has six sprints for the current release. Sprint five is underway and the automated regression suite is due to start later today.
You have re-examined the results from the automated regression runs for the past four sprints. You notice that two test cases both reported a pass for sprints 1 and 4 but a fail for sprints 2 and 3. The failures have gone undetected and are therefore unexplained. Both test cases are closely coupled with other tests in the suite.
What course of action SHOULD you take?
- A. Quarantine the test cases, run the regression suite without them, and perform root cause analysis on the test cases in parallel.
- B. Run the regression suite as planned and see If the tests fail again if they do, determine the cause of failure.
- C. Remove the test cases from the regression suite and refer them to the test designer for manual testing for future sprints.
- D. Run the test cases manually now. If they still pass, keep them in the regression suite, if they fail perform root cause analysis.
Answer: A
NEW QUESTION # 36
You are planning the pilot for an in-house developed Test Automation solution (TAS).
Which two of the following would be important steps to take as part of the planning process?
a) Review your organisation's current projects and identify which one would be most suitable to pilot the TAS.
b) Ensure that the developers will provide the necessary commitment for the TAS deployment activities.
c) Run a series of training workshops for new users of the TAS before they are asked to use it.
d) Develop a project plan for the pilot and reserve the necessary budget and resources for its implementation.
e) Ask the developers to provide any missing functionality during the deployment activities.
- A. c and d
- B. a and b
- C. c and e
- D. b and d
Answer: D
NEW QUESTION # 37
You are implementing test automation for a project and you want to be able to generate test cases automatically using a series of test design tools which use a variety of test design techniques such as decision tables, pairwise testing and boundary value analysis.
You also want to generate test data automatically which can then be used by the tests.
Initially these tests will be run manually to verify their correctness and ultimately you want to include them in the test execution tool so that they can run unattended.
Which layer of the gTAA will be used to support the specification of the test cases and preparation of the test data?
- A. The generation layer
- B. The execution layer
- C. The adaptation layer
- D. The definition layer
Answer: D
NEW QUESTION # 38
You are evaluating several test modelling tools and are wanting to automatically generate test cases within the tool where many different combinations of input data are created.
You are then wanting to export the test cases into a csv file which can then be read by a functional test execution tool using a data-driven or keyword-driven scripting method.
You have investigated several tools and there is only one tool that provides all the necessary features defined by your team with the exception of the export facility. It does not provide an export into either .xls or .csv formats.
What would be the BEST next step regarding the selection of this tool?
- A. Consider another tool that is more "fit for purpose" and has all the features required.
- B. Ask the vendor and use forums to see if a solution is available or going to be available in the future.
- C. Explore the possibility of creating your own export facility.
- D. Purchase this tool and generate the .csv file manually.
Answer: B
NEW QUESTION # 39
Which of the following CORRECTLY describes how automation SHOULD be applied to confirmation testing?
- A. Confirmation tests can be automated and incorporated into an automated regression suite to show whether defects that were previously fixed reoccur
- B. Confirmation tests are not good candidates for automation as they are not designed to run many times
- C. Confirmation tests should only be automated if they fail to pass on the first attempt
- D. A confirmation test should only be automated after it has been run manually
Answer: A
NEW QUESTION # 40
A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have been asked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?
- A. Frequency of use
- B. Complexity to automate
- C. Maturity of the test process
- D. Sustainability of the automated environment
Answer: D
NEW QUESTION # 41
You are working on a web-based application called Book Vault that allows people to upload books and order books. This application must be available on all major browsers.
You have been testing the application manually and management have asked you to consider automating some of the tests.
You have investigated a number of commercial and free tools which can automate tests at a web browser level and one tool in particular meets your requirements and you have implemented a trial version.
You have basic programming skills and the main goal is to automate a few functional tests to see if the tool is compatible with the application and can recognise the objects and controls.
Which scripting technique would be MOST suitable in this scenario in order to meet the objectives?
- A. Capture-replay scripting
- B. Structured scripting
- C. Model-based scripting
- D. Data-driven scripting
Answer: A
NEW QUESTION # 42
The Test Automation Manager has asked you to provide a solution for collecting metrics from the TAS that measures code coverage every time the automated regression test pack is run. The metrics must be trend based to ensure that the scope of the regression test pack continues to reflect enhancements made to the SUT - coverage must not drop and should ideally increase. The solution must be as automated as possible to avoid unnecessary manual overheads and errors.
Which of the following approaches would BEST meet these requirements?
- A. The automated testware would record the pass/fail rate of each regression test case, export the data to a pre-formatted Excel spreadsheet that automatically updates a trend analysis success rate bar chart and emails it to stakeholders.
- B. Test automation cannot measure code coverage for the SUT, only the code for the automation tools and scripts. The automated test cases would need to be run manually with a code coverage and reporting tool running in the background.
- C. The automated testware would record overall code coverage for each run, export the data to a pre-formatted Excel spreadsheet that automatically updates a trend analysis bar chart for you to distribute to stakeholders.
- D. The automated testware would record overall code coverage for each run and add the figure to a new row in a pre-formatted Excel spreadsheet. You would then present the spreadsheet to stakeholders so they could look for changes in coverage.
Answer: C
NEW QUESTION # 43
Which of the following is considered a disadvantage of test automation?
- A. Tests are more likely to have operator errors.
- B. Automated exploratory testing is difficult to implement
- C. Test automation can be a distraction from the objective of finding bugs
- D. Slower feedback on the quality of the system.
Answer: D
NEW QUESTION # 44
Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the same version of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
The configuration of the TAS uses automated installation scripts
The TAF saves the logs needed to debug errors in XML format
C) Features of the TAF not used by the automated tests have been tested D) All the automated test cases contain the expected results E) The TAS components are under configuration management
- A. A and d
- B. B and c
- C. B and d
- D. A and e
Answer: D
NEW QUESTION # 45
......
Get 100% Authentic ISTQB CT-TAE Dumps with Correct Answers: https://www.torrentvce.com/CT-TAE-valid-vce-collection.html
New Training Course CT-TAE Tutorial Preparation Guide: https://drive.google.com/open?id=18Wle_5Y-jQ88V-9IPpyl2gkjHTTTv9x6