2025 Realistic Verified Free VMware 2V0-41.24 Exam Questions [Q24-Q42]

Share

2025 Realistic Verified Free VMware 2V0-41.24 Exam Questions

2V0-41.24 Real Exam Questions and Answers FREE


VMware 2V0-41.24 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Troubleshoot and Optimize the VMware Solution: This section evaluates the skills of VMware Networking Professionals in troubleshooting and optimizing NSX solutions. Candidates will use log files to identify issues, including locating default log file locations and generating log bundles to assist in diagnostics.
Topic 2
  • Install, Configure, and Administrate the VMware Solution: This domain targets VMware System administrators and emphasizes preparing an NSX infrastructure for deployment. Candidates will learn to create transport zones and configure essential components necessary for a functional NSX environment.
Topic 3
  • VMware Solution: This section measures the skills of VMware NSX Networking professionals and covers knowledge of the VMware Virtual Cloud Network and NSX. Candidates will demonstrate an understanding of the NSX management cluster and the data plane, focusing on how these components interact to provide network virtualization.

 

NEW QUESTION # 24
Match the NSX Intelligence recommendations with their correct purpose.

Answer:

Explanation:


NEW QUESTION # 25
Where does an administrator configure the VLANs used in VRF Lite? (Choose two.)

  • A. uplink interface of the default Tier-0 gateway
  • B. segment connected to the Tier-1 gateway
  • C. uplink trunk segment
  • D. uplink interface of the VRF gateway

Answer: B,D

Explanation:
The VLANs used in VRF Lite are configured on the uplink interface of the VRF gateway, which enables traffic segmentation and routing within the VRF context.
The uplink trunk segment is where multiple VLANs can be configured and tagged, allowing them to be used by the VRF Lite setup for routing and segmentation across the network.


NEW QUESTION # 26
Which NSX CLI command is used to change the authentication policy for local users?

  • A. Set hardening- policy
  • B. Set auth-policy
  • C. Get auth-policy minimum-password-length
  • D. Set cli-timeout

Answer: B

Explanation:
According to the VMware NSX Documentation4, the set auth-policy command is used to change the authentication policy settings for local users, such as password length, lockout period, and maximum authentication failures. The other commands are either used to view the authentication policy settings (B), change the CLI session timeout (A), or change the hardening policy settings .
Reference: 4: Authentication Policy Settings - VMware Docs
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-99BAED85-D754-4589-9050-
72A1AB528C10.html


NEW QUESTION # 27
Which of the two following characteristics about NAT64 are true? (Choose two.)

  • A. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.
  • B. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
  • C. NAT64 is supported on Tier-0 and Tier-1 gateways.
  • D. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
  • E. NAT64 is supported on Tier-1 gateways only.

Answer: A,C

Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-69604E49-BC8B-4777-BFD8- B98F8D1FF064.html


NEW QUESTION # 28
Which three NSX Edge components are used for North-South Malware Prevention? (Choose three.)

  • A. Reputation Service
  • B. Security Hub
  • C. Thin Agent
  • D. RAPID
  • E. Security Analyzer
  • F. IDS/IPS

Answer: B,D,F

Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-69DF70C2-1769-4858-97E7-B757CAED08F0.html#:~:text=On%20the%20north%2Dsouth%20traffic,Guest%20Introspection%20(GI)%20platform.
The main components on the edge node for north-south malware prevention perform the following functions:
* IDS/IPS engine: Extracts files and relays events and data to the security hub North-south malware prevention uses the file extraction features of the IDS/IPS engine that runs on NSX Edge for north-south traffic.
* Security hub: Collects file events, obtains verdicts for known files, sends files for local and cloud-based analysis, and sends information to the security analyzer
* RAPID: Provides local analysis of the file
* ASDS Cache: Caches reputation and verdicts of known files


NEW QUESTION # 29
What is the VMware recommended way to deploy a virtual NSX Edge Node?

  • A. Through the OVF command line tool
  • B. Through the vSphere Web Client
  • C. Through the NSX Ul
  • D. Through automated or interactive mode using an ISO

Answer: D

Explanation:
VMware recommends deploying a virtual NSX Edge Node using an ISO in either automated or interactive mode. This method provides flexibility and ensures that the NSX Edge node is deployed properly with all the necessary configurations. Using an ISO allows for a more streamlined and controlled deployment process, especially in larger environments.


NEW QUESTION # 30
Which CLI command shows syslog on NSX Manager?

  • A. gee log-file syslog
  • B. (show log manager follow
  • C. [get log-file auch.log
  • D. /var/log/syslog/syslog.log

Answer: B

Explanation:
The show log manager follow command is used on the NSX Manager to view the syslog in real-time. This command displays ongoing log entries, allowing administrators to monitor syslog messages as they are generated, which is helpful for troubleshooting and real-time analysis.


NEW QUESTION # 31
Where in the NSX UI would an administrator set the time attribute for a time-based Gateway Firewall rule?

  • A. The option to set time-based rule is a clock Icon in the policy.
  • B. There Is no option in the NSX UI. It must be done via command line interface.
  • C. The option to set time-based rule is a clock Icon in the rule.
  • D. The option to set time based rule is a field in the rule Itself.

Answer: A

Explanation:
According to the VMware documentation1, the clock icon appears on the firewall policy section that you want to have a time window. By clicking the clock icon, you can create or select a time window that applies to all the rules in that policy section. The other options are incorrect because they either do not exist or are not related to the time-based rule feature. There is no option to set a time-based rule in the rule itself, as it is a policy-level setting. There is also an option to set a time-based rule in the NSX UI, so it does not require using the command line interface.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-8572496E-A60E-48C3-A016-
4A081AC80BE7.html


NEW QUESTION # 32
An NSX administrator wants to create a Tler-0 Gateway to support equal cost multi-path (ECMP) routing.
Which failover detection protocol must be used to meet this requirement?

  • A. Beacon Probing (BP)
  • B. Virtual Router Redundancy Protocol (VRRP)
  • C. Host Standby Router Protocol (HSRP)
  • D. Bidirectional Forwarding Detection (BFD)

Answer: D

Explanation:
According to the VMware NSX 4.x Professional documents and tutorials, BFD is a failover detection protocol that provides fast and reliable detection of link failures between two routing devices. BFD can be used with ECMP routing to monitor the health of the ECMP paths and trigger a route change in case of a failure12. BFD is supported by both BGP and OSPF routing protocols in NSX-T3. BFD can also be configured with different timers to achieve different detection times3.


NEW QUESTION # 33
What are the four types of role-based access control (RBAC) permissions? (Choose four.)

  • A. Read
  • B. Network Admin
  • C. None
  • D. Full access
  • E. Auditor
  • F. Execute
  • G. Enterprise Admin

Answer: A,C,D,E

Explanation:
Auditor: Allows users to view settings and logs without making changes.
Full access: Provides complete control over all NSX settings and configurations.
None: No permissions are granted, restricting access completely.
Read: Allows users to view configurations and settings without editing capabilities.


NEW QUESTION # 34
Which tool could be used to configure BGP on a Tier-0 Gateway?

  • A. NSX CLI
  • B. iPerf3
  • C. ESX CLI
  • D. API

Answer: A,D


NEW QUESTION # 35
A company security policy requires all users to log Into applications using a centralized authentication system.
Which two authentication, authorization, and accounting (AAA) systems are available when Integrating NSX with VMware Identity Manager? (Choose two.)

  • A. RADII 2.0
  • B. LDAP and OpenLDAP based on Active Directory (AD)
  • C. SecureDAP
  • D. Keyoen Enterprise
  • E. RSA SecurelD

Answer: B,E

Explanation:
NSX supports two types of authentication, authorization, and accounting (AAA) systems when integrating with VMware Identity Manager: RSA SecurID and LDAP and OpenLDAP based on Active Directory (AD). RSA SecurID is a two-factor authentication system that uses a token-based approach to verify the identity of users. LDAP and OpenLDAP based on AD are directory services that store and manage user information and credentials. Both systems can be used to provide centralized authentication for users who want to access applications in an NSX environment.
https://blogs.vmware.com/networkvirtualization/2017/11/remote-user-authentication-and-rbac-with-nsx- t.html The integration of VMware Identity Manager with NSX provides the following benefits related to user authentication:
* Support for extensive authentication, authorization, and accounting (AAA) systems, including:
- RADIUS
- Smart cards and common access cards
- RSA SecureID
- LDAP and OpenLDAP based on Active Directory (AD)
* Enterprise SSO:
- Common authentication platform across multiple VMware solutions
- Seamless SSO experience
NSX has its own native LDAP and Active Directory integration, but VMware Identity Manager also offers this capability


NEW QUESTION # 36
Which two statements describe the characteristics of an Edge Cluster in NSX? (Choose two.)

  • A. Must contain only one type of edge nodes (VM or bare metal)
  • B. Can have a maximum of 8 edge nodes
  • C. Can have a maximum of 10 edge nodes
  • D. Can contain multiple types of edge nodes (VM or bare metal)
  • E. Must have only active-active edge nodes

Answer: B,D

Explanation:
An NSX Edge Cluster can contain a mix of edge node types, meaning it can have both virtual machine (VM) and bare-metal edge nodes within the same cluster.
An NSX Edge Cluster supports a maximum of 8 edge nodes, allowing for scalability while adhering to the NSX design limitations for edge clusters.


NEW QUESTION # 37
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

  • A. Group
  • B. Tier-1 Gateway
  • C. DFW
  • D. Segment Port
  • E. Segment

Answer: A,C

Explanation:
A group is a logical construct that represents a collection of objects in NSX, such as segments, segment ports, virtual machines, IP addresses, MAC addresses, tags, or security policies. A group can be used to define dynamic membership criteria based on various attributes or filters. A group can also be used as the scope of a distributed firewall rule, which means that the rule will apply to all the traffic that matches the group membership criteria32


NEW QUESTION # 38
Which statement is true about an alarm in a Suppressed state?

  • A. An alarm can be suppressed for a specific duration in minutes.
  • B. An alarm can be suppressed for a specific duration in seconds.
  • C. An alarm can be suppressed for a specific duration in hours.
  • D. An alarm can be suppressed for a specific duration in days.

Answer: C

Explanation:
An alarm can be suppressed for a specific duration in hours.
According to the VMware NSX documentation, an alarm can be in one of the following states: Open, Acknowledged, Suppressed, or Resolved12 An alarm in a Suppressed state means that the status reporting for this alarm has been disabled by the user for a user-specified duration12 When a user moves an alarm into a Suppressed state, they are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved13 To learn more about how to manage alarm states in NSX, you can refer to the following resources:
VMware NSX Documentation: Managing Alarm States 1
VMware NSX Documentation: View Alarm Information 2
VMware NSX Intelligence Documentation: Manage NSX Intelligence Alarm States 3
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.2/user-guide/GUID-EBD3C5A8-F9AB-4A22- BA40-92D61850C1E6.html


NEW QUESTION # 39
An administrator wants to validate the BGP connection status between the Tier-O Gateway and the upstream physical router.
What sequence of commands could be used to check this status on NSX Edge node?

  • A. show logical-routers
    get vrf
    show ip route bgp
  • B. get gateways
    vrf <number>
    get bgp neighbor
  • C. set vrf <ID> show logical-routers show <LR-D> bgp
  • D. enable <LR-D> get vrf <ID>
    show bgp neighbor

Answer: B

Explanation:
The sequence of commands that could be used to check the BGP connection status between the Tier-O Gateway and the upstream physical router on NSX Edge node is get gateways, vrf <number>, get bgp neighbor. These commands can be executed on the NSX Edge node CLI after logging in as admin6. The first command, get gateways, displays the list of logical routers (gateways) configured on the Edge node, along with their IDs and VRF numbers7. The second command, vrf <number>, switches to the VRF context of the desired Tier-O Gateway, where <number> is the VRF number obtained from the previous command7. The third command, get bgp neighbor, displays the BGP neighbor summary for the selected VRF, including the neighbor IP address, AS number, state, uptime, and prefixes received8. The other options are incorrect because they either use invalid or incomplete commands or do not switch to the correct VRF context.
Reference: NSX-T Command-Line Interface Reference, NSX Edge Node CLI Commands, Troubleshooting BGP on NSX-T Edge Nodes


NEW QUESTION # 40
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?

  • A. Layer 2 VPN
  • B. Layer 3 route
  • C. Layer 2 bridge
  • D. Layer 2 broadcast domain

Answer: D

Explanation:
An overlay segment is a logical construct that provides Layer 2 connectivity between virtual machines that are attached to it. An overlay segment can span multiple hosts and can be extended across different subnets or locations using Geneve encapsulation3. Therefore, two virtual machines on the same overlay segment belong to the same Layer 2 broadcast domain, which means they can communicate with each other using their MAC addresses without requiring any routing. The other options are incorrect because they involve Layer 3 or higher network boundaries, which require routing or tunneling to connect different segments.
Reference: VMware NSX Documentation


NEW QUESTION # 41
Which VMware GUI tool is used to identify problems in a physical network?

  • A. VMware Aria Automation
  • B. VMware Aria Orchestrator
  • C. VMware Site Recovery Manager
  • D. VMware Aria Operations Networks

Answer: D

Explanation:
VMware Aria Operations Networks (formerly known as vRealize Network Insight) is a tool specifically designed for network visibility and troubleshooting. It provides insights into both virtual and physical network infrastructures, making it ideal for identifying problems in a physical network.


NEW QUESTION # 42
......

Exam Dumps 2V0-41.24 Practice Free Latest VMware Practice Tests: https://www.torrentvce.com/2V0-41.24-valid-vce-collection.html

2V0-41.24 Exam Questions | Real 2V0-41.24 Practice Dumps: https://drive.google.com/open?id=13nSpr9E00rPE2RYfoGXuV14fTEaqFAE-