2024 NCS-Core Dumps PDF - NCS-Core Real Exam Questions Answers
Valid NCS-Core Test Answers & Nutanix NCS-Core Exam PDF
Difficulty in writing Nutanix NCS-Core Certification Exam:
The writing process for this exam is quite difficult because it covers not only installation and configuration of the NVP, but also the network, storage, user management, system compatibility, capacity planning of Nutanix systems, high availability of Nutanix systems, data management, encryption management of data at rest in Nutanix systems. It also covers best practices related to performance tuning. This section also includes how to create virtual machines with Nutanix systems. Nutanix NCS-Core Dumps will be very useful for you to pass the exam and get the certification. Achieve maximum performance from Nutanix systems when designing and creating these virtual machines.
NEW QUESTION # 21
An existing Nutanix customer has several clusters in production and is adding a new cluster. The customer wants to create an AHV cluster that has already been racked and powered on remotely, with the factory image, using Prism Central.
Which step should the consultant take next?
- A. Build the cluster with Foundation Central.
- B. Build the cluster with the Foundation VM.
- C. Build the cluster with the Foundation Applet
- D. Bare metal image the nodes with the Foundation VM.
Answer: C
NEW QUESTION # 22
For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?
- A. * Restart networking services on the CVM
* Determine the current configuration of the affected CVM via output
* Access the Alerts/Events page for the CVM network connection failures - B. * Access the Hardware Page to verifyresources are available
* Analyze ail CVM Speed Alerts in the Alerts/Events page
* Analyze output for the network and interface properties and connectivity issues - C. * Review Alerts page for NIC speed alerts and alert timing
* Analyze the genesis.out log file for process failures
* Assess the NIC properties inthe Network Visualization > Host Properties page - D. * Verify Host/CVM connectivity on the Network Visualization page
* Use toverify the bridge and bond configuration
* Review alerts/events page for the CVM disconnected error
Answer: D
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000CuaDCAS
NEW QUESTION # 23
Refer to the exhibit.
A system administrator is using Range-Autofill tool to assign IP addresses to setup a multi-block cluster based on the following configuration:
Which additional changes must be made during the Foundation process to configure the cluster correctly?
- A. Reorder block serial
- B. Change host names
- C. Change IP address
- D. Reorder blocks
Answer: B
NEW QUESTION # 24
A customer recently set up Async Replication between Site A and Site B.
The customer wants to conduct aplanned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?
- A. VMs get deleted from Site A and the protection domain is no longer active.
- B. VMs get deleted from Site B. and the protection domain is now Active.
- C. VMs are powered off on Site A and must be manually powered on at Site B.
- D. Customer must then manually power off VMs at Site A and power them on at Site B.
Answer: A
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-do
NEW QUESTION # 25
A customer racks all nodes in the new cluster. The customer does not allow IPv6 for node discovery.
The consultant is not allowed to use the consultant's own flat switch in the customer's environment.
Which step should the consultant take to resolve this issue?
- A. Bare metal image all nodes with Foundation VM.
- B. Open a console to all nodes and statically assign IP addresses.
- C. Connect to the top of rack switch and discover the nodes with IPv4.
- D. Image each node individually with Foundation VM.
Answer: B
NEW QUESTION # 26
A consultant has deployed a new Nutanix AHV cluster with Foundation. The customer requests separating the management and production traffic in the CVM.
Which feature should the consultant configure?
- A. Multi-homing
- B. Network Segmentation
- C. VLAN Tagging
- D. Micro-segmentation
Answer: A
NEW QUESTION # 27
A consultant is deploying a Nutanix cluster at a customer location. The consultant will be deploying the latest AOS along with the latest Nutanix hardware.
Which three references should the consultant review prior to this installation? (Choose three.)
- A. End-Of-Life (EOL) Information
- B. Field & Security Advisories
- C. Acropolis Advanced Administration Guide
- D. Software Product Interoperability
- E. Release Notes
Answer: B,D,E
Explanation:
When deploying the latest AOS along with the latest Nutanix hardware, it is essential for the consultant to review multiple sources of information to ensure a successful installation. Release Notes provide details about new features, improvements, and known issues in the latest version of AOS. Software Product Interoperability outlines compatibility between different software versions, ensuring that the AOS and any integrated applications or environments will function correctly. Field & Security Advisories inform about potential security issues and recommended practices to avoid common pitfalls or security risks.
References:
* Nutanix Bible: Documentation and Release Information
* Nutanix University: Installation and Security Best Practices
NEW QUESTION # 28
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Open terminal and configure via ifconfig command.
- B. Run the set_foundation_ip_address application on the VM desktop.
- C. Ensure the vNIC is set to bridged adapter.
- D. Configure the static IP address through the desktop virtualization software.
Answer: B,C
NEW QUESTION # 29
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Create a security policy with a service chain directing that VMs traffic to the firewall VM
- B. Quarantine the VM using the Forensic Method
- C. Disable the vNIC on the affected VM
- D. Create a firewall rule that blocks VM traffic but permits diagnostic access
Answer: B
Explanation:
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION # 30
A Nutanix cluster has 10TB usable storage. The customer wants to create a 100GB datastore for ISO images to eliminate too much storage being consumed by unnecessary images.
Which setting should be used to accomplish this goal?
- A. From Container Advanced Settings, configure 100GB for reserved capacity.
- B. From Container Advanced Settings, enable erasure coding.
- C. From Container Advanced Settings, configure 100GB for advertised capacity.
- D. From Container Advanced Settings, turn on compression and deduplication.
Answer: C
Explanation:
To limit a datastore to a specific capacity within a Nutanix cluster, the best approach is to configure the advertised capacity in the Container Advanced Settings. Setting the advertised capacity to 100GB ensures that this amount of storage is reported to external entities (like hypervisors or operating systems) as the total usable capacity of the datastore, effectively preventing the storage of additional data beyond this limit. This method is preferred over reserving capacity, which guarantees space for specific uses but doesn't limit the total size visible to the system.
References:
* Nutanix Bible (https://www.nutanixbible.com), specifically the section on storage container configuration.
* Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), covering datastore management.
NEW QUESTION # 31
An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).
Upon investigation, the administrator finds the following:
* All AHV hosts are powered on and the CVMs are running
* Nodes A, B, and C are connected to one top of rack switch
* Nodes D and E are connected to a second top of rack switch
* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?
- A. Nodes D and E are inmaintenance mode.
- B. The default gateway for the CVMs and AHV hosts is down.
- C. The switch connecting Nodes D and E is down.
- D. The genesis process is down on both Nodes D and E.
Answer: C
Explanation:
https://hyperhci.com/2020/07/29/nutanix-cluster-services-down-troubleshooting/
NEW QUESTION # 32
An administrator is deploying Nutanix Files 3.5 and needs to configure the sizing of the FSVMs for an increased number of concurrent SMB connections over the default 750.
What should the administrator do?
- A. During installation, click Customize on the File Server Installation screen, change the number of connections, and finish the installation
- B. Deploy the Files VMs.power down the three FSVMs. change the CPU and RAM via Prism, and then power the three FSVMs back up
- C. During installation, input the correct number of connections in the File Server Installation screen and complete the installation
- D. Complete the default installation change the CPU and RAM m Prism, and then log into the File Server dashboard and change the Filer Server Properties
Answer: A
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-manage-c.html
NEW QUESTION # 33
A consultant has deployed a Nutanix cluster with AOS 5.10.x, then discovers the customer's environment is running on AOS 5.6.x. The consultant decides to re-image the cluster using the foundation Java applet. During the Foundation discovery, all cluster nodes display a status of Unavailable.
What should the consultant do to resolve the issue?
- A. Reset the IPMI IP addresses.
- B. Use the Phoenix ISO
- C. Restart the Genesis service on the cluster.
- D. Destroy the cluster.
Answer: B
Explanation:
When a Nutanix cluster needs to be re-imaged and nodes are showing as 'Unavailable' during the discovery process in the Foundation tool, it is often due to a deeper issue with the nodes' existing configuration or software state. Using the Phoenix ISO to re-image the nodes is the recommended approach. The Phoenix ISO can be used to completely reinstall the software on the nodes, ensuring that any problematic configurations or software issues are wiped clean, allowing for a fresh installation with the desired version of AOS.
References:
* Nutanix Bible: Re-imaging Clusters
* Nutanix University: Troubleshooting Installation Issues
NEW QUESTION # 34
During the knowledge transfer session, a consultant conducts a storage management demo. In the Creating a Storage Container workflow, the customer notices the Advertised Capacity parameter and asks for an explanation.
How should the consultant respond?
- A. It enables the ability to cap usage of storage containers to be smaller than the limit of a storage pool capacity.
- B. It assists in reserving space for a storage container to ensure a maximum storage capacity is available.
- C. It is a capacity computed by dividing physical storage usage of a container by the replication factor (RF).
- D. It assists in reserving space for a storage container to ensure a minimum storage capacity is available.
Answer: A
Explanation:
The "Advertised Capacity" parameter in the context of creating a storage container in Nutanix systems is used to cap the usage of storage containers to be smaller than the limit of a storage pool's capacity. This feature allows administrators to set a maximum storage limit for a container, preventing it from using the entire storage pool's capacity and ensuring that resources are allocated based on planned capacity requirements. This helps in maintaining predictable storage management and allocation within a Nutanix environment.References: Nutanix Storage Container Management Documentation, Nutanix Best Practices for Storage Configuration.
NEW QUESTION # 35
Anadministrator needs to evaluate if the existing configuration of Protection Domains meets the specified corporate recovery policy for SQL Data. The corporate policy requires that all SQL Servers be recoverable at the DR site within 30 minutes, and must result in a maximum of 60 minutes of data loss. SQL data must be required.
The protection domain is configured as follows:
* Application consistent snapshots are enabled
* The SQL server VMs are assigned to the Protection Domain as their own Consistency Group
* The Protection Domain schedule is configured as snapshots taken every 90 minutes from 7 am until 8 pm What must be changed to meet the required policy?
- A. Revise the schedule tc be 15 minutes
- B. Revise the schedule to be 45 minutes
- C. Revise the schedule to be 60 minutes
- D. Revise the schedule to be 30 minutes
Answer: C
NEW QUESTION # 36
......
Nutanix NCS-Core Certification Exam
How can you start preparation for Nutanix NCS-Core Certification Exam
Introduction of Nutanix NCS-Core Certification Exam
Nutanix Certifications are industry-leading certifications demonstrating specialized knowledge of the Nutanix platform and its features. The NCS-100, NCS-200, and NCS-300 exams cover a wide range of topics from storage to networking to security to management.
In this article, I will walk you through the process of preparing for the NCS-100 exam. The information should also help to clarify the topics covered in the NCS-200 exam, which are sometimes overlapping to some extent. Nutanix NCS-Core Dumps is an up-to-date platform that helps you prepare for the NCS-100 certification test. It has the knowledge and real scenario design, which can help you master all the necessary skills and knowledge points as quickly as possible, and as accurately as possible.
What is the Nutanix NCS-Core Exam?
The Nutanix NCS-Core Exam is designed to test your understanding of the core functionality of the Nutanix platform, including storage, networking, management, and security. The exam covers basic topics such as proper configuration examples for various scenarios, correct use of variables, and operational procedures. More advanced functions are also covered with detailed demonstrations on each topic. It can be taken by anyone who has passed the NCS-100 exam or has equivalent prior experience testing the platform. Updates and changes to the exam and its content will be made regularly-at least once a quarter. Nutanix NCS-Core Dumps helps you speed up your preparation and exam training.
NCS-Core Exam Dumps - PDF Questions and Testing Engine: https://www.torrentvce.com/NCS-Core-valid-vce-collection.html
Realistic NCS-Core Exam Dumps with Accurate & Updated Questions: https://drive.google.com/open?id=1YW7TtUZ0PUqdDZltb0zWX3D7QKx7laLQ