2023 Valid Essentials Real Exam Questions (Updated) 100% Dumps & Practice Exam
[UPDATED 2023] WatchGuard Essentials Questions Prepare with Free Demo of PDF
NEW QUESTION # 40
Which of these actions adds a host to the temporary or permanent blocked sites list? (Select three.)
- A. Add the site to theBlocked Sites Exceptionslist.
- B. In Policy Manager, selectSetup> Default Threat Protection > Blocked Sitesand clickAdd.
- C. On the Firebox System Manager >Blocked Sitestab, selectAdd.
- D. Enable theAUTO-block sites that attempt to connectoption in a deny policy.
Answer: B,C,D
Explanation:
A: You can configure a deny policy to automatically block sites that originate traffic that does not comply with the policy rulese
1.From Policy Manager, double-click the PCAnywhere policy.
2.Click the Properties tab. Select the Auto-block sites that attempt to connect checkbox.
Reference:https://www.watchguard.com/training/fireware/80/defense8.htm
C: The blocked sites list shows all the sites currently blocked as a result of the rules defined in Policy Manager. From this tab, you can add sites to the temporary blocked sites list, or remove temporary blocked sites.
Reference:http://www.watchguard.com/training/fireware/82/monitoa6.htm
D: You can usePolicy Manager to permanently add sites to the Blocked Sites list.
1.select Setup > Default Threat Protection > Blocked Sites.
2.Click Add.
The Add Site dialog box appears.
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#cshid=en-
US/intrusionprevention/blocked_sites_permanent_c.html
NEW QUESTION # 41
Which items are included in a Firebox backup image? (Select four.)
- A. Support snapshot
- B. Log file
- C. Feature keys
- D. Configuration file
- E. Certificates
- F. Fireware OS
Answer: A,B,C,D
NEW QUESTION # 42
A local branch office VPN tunnel route is configured as shown in this image.
On the remote peer device, what must be configured as the remote network address for this tunnel route? (Select one.)
- A. 10.0.1.0/24
- B. 10.0.10.0/24
- C. 10.0.20.0/24
Answer: B
NEW QUESTION # 43
Which tool is used to see a treemap visualization of the traffic through your Firebox? (Select one)
- A. FireBox SystemManager - Blocked Sites list
- B. Log Server
- C. FireWatch
- D. Firebox System Manager - Subscription services
- E. Firebox System Manager - Authentication list
- F. Traffic Monitor
Answer: C
Explanation:
The FireWatch page is separated into tabs of data that is presented in aTreemap Visualization. The treemap is a widget that proportionally sizes blocks in the display to represent the data for that tab. The largest blocks on the tab represent the largest data users. The data is sorted by the tab you select and the type you select from the drop-down list at the top right of the page.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 44
When you configure the Global Application Control action, it is automatically applied to all policies.
- A. False
- B. True
Answer: A
NEW QUESTION # 45
In a Mobile VPN configuration, why would you choose default route VPN over split tunnel VPN? (Select one.)
- A. Default route VPN uses less bandwidth
- B. Default route VPN uses less processing power
- C. Default route VPN allows your Firebox to examine all remote user traffic
- D. Default route VPN automatically allows dynamic NAT
Answer: C
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/mvpn/pptp/mvpn_pptp_internet-access_c.html
The most secure option is to require that all remote user Internet traffic is routed through the VPN tunnel to the XTM device. Then, the traffic is sent back out to the Internet. With this configuration (known as default-route VPN), the XTM device is able to examine all traffic and provide increased security, although it uses more processing power and bandwidth.
NEW QUESTION # 46
What is one reason that users could see a certificate warning in their web browsers when they connect to Fireware XTM Web UI? (Select one.)
- A. The user or group is not present in the Firebox User database.
- B. The user has been previously added to the Blocked Sites list.
- C. The Firebox or XTM device uses the default self-signed certificate.
- D. The authentication server does not respond after three minutes.
Answer: C
NEW QUESTION # 47
A user receives a deny message that the installation file (install.exe) is blocked by the HTTP-proxy policy and cannot be downloaded. Which HTTP proxy action rule must you modify to allow download of the installation file? (Select one.)
- A. HTTP Request > Authorization
- B. WebBlocker
- C. HTTP Request > Request Methods
- D. HTTP Response > Header Fields
- E. HTTP Response > Body Content Types
Answer: E
NEW QUESTION # 48
Match each WatchGuard Subscription Service with its function.
Prevents accidental or unauthorized transmission of confidential information outside your network.
(Choose one).
- A. Gateway / Antivirus
- B. Reputation Enable Defense RED
- C. APT Blocker
- D. Intrusion Prevention Server IPS
- E. Data Loss Prevention DLP
Answer: E
Explanation:
Explanation/Reference:
Data Loss Prevention (DLP) watches for accidental and intentional breaches of private/sensitive data through an organizational policy. Provides a library of over 200 rules to protect organization data and has the ability to parse over 30 different file formats including Microsoft Office formats and PDFs.
Reference: http://www.tomsitpro.com/articles/network-security-solutions-guide, 2-866-6.html
NEW QUESTION # 49
Clients on the trusted network need to connect to a server behind a router on the optional network. Based on this image, what static route must be added to the Firebox for traffic from clients on the trusted network to reach a server at 10.0.20.100? (Select one.)
- A. Route to 10.0.20.0/24, Gateway 10.0.2.1
- B. Route to 10.0.20.0, Gateway 10.0.2.254
- C. Route to 10.0.10.0/24, Gateway 10.0.10.1
- D. Route to 10.0.20.0/24, Gateway 10.0.2.254
Answer: D
Explanation:
Explanation/Reference:
We must add a trusted static route to the 10.0.20.0/24 network through the 10.0.2.254 gateway.
NEW QUESTION # 50
Match each WatchGuard Subscription Service with its function.
Cloud based service that controls access to website based on a site's previous behavior. (Choose one).
- A. WebBlocker
- B. Application Control
- C. Data Loss Prevention DLP
- D. Intrusion Prevention Server IPS
- E. Reputation Enable Defense RED
- F. QuarantineServer
Answer: E
Explanation:
Reputation Enable Device (RED) is a cloud-based reputation service that controls user's ability to get main access to web malicious sites. Works in concert with the WebBlocker module.
Reference:http://www.tomsitpro.com/articles/network-security-solutions-guide, 2-866-6.html
NEW QUESTION # 51
When you examine the log messages In Traffic Monitor, you see that some network packets are denied with an unhandled packet log message. What does this log massage mean? (Select one.)
- A. The packet is denied because it does not match anyfirewall policies.
- B. The packet is denied because it matched an IPS signature.
- C. The packet is denied because it matched a policy.
- D. The packet is denied because the site is on the Blocked Sites List.
Answer: A
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/intrusionprevention/unhandled_pkts_about_c.html
NEW QUESTION # 52
Match each WatchGuard Subscription Service with its function.
Uses full-system emulation analysis to identify characteristics and behavior of zero-day malware. (Choose one).
- A. WebBlocker
- B. Gateway / Antivirus
- C. DataLoss Prevention DLP
- D. Application Control
- E. Quarantine Server
- F. APT Blocker
- G. Reputation Enable Defense RED
- H. Intrusion Prevention Server IPS
- I. Spam Blocker
Answer: F
Explanation:
APT Blocker is intended to stop malware and zero-day threats that are trying to invade anorganization's network.
APT Blocker uses a next-gen sandbox to get detailed views into the execution of a malware program. After first running through other security services, files are fingerprinted and checked against an existing database - first on theappliance and then in the cloud. If the file has never been seen before, it is analyzed using the system emulator, which monitors the execution of all instructions. It can spot the evasion techniques that other sandboxes miss.
Reference:http://www.watchguard.com/wgrd-products/security-modules/apt-blocker
NEW QUESTION # 53
After you enable spamBlocker, your users experience no reduction in the amount of spam they receive. What could explain this? (Select three.)
- A. spamBlocker Virus Outbreak Detection is not enabled.
- B. The spamBlocker action for Confirmed Spam is set to Allow.
- C. The Maximum File Size to Scan option is set too high.
- D. A spamBlocker exception is configured to allow traffic from sender *.
- E. Connections cannot be resolved to the spamBlocker servers because DNS is not configured on the Firebox.
Answer: B,D,E
NEW QUESTION # 54
You configured four Device Administrator user accounts for your Firebox. To see a report of witch Device Management users have made changes to the device configuration, what must you do? (Select two.)
- A. Connect to Report Manager or Dimension and view the Audit Trail report for your device.
- B. Configure your device to send audit trail log messages to your WatchGuard Log Server or Dimension Log Server.
- C. Start Firebox System Manager for the device and review the activity for the Management Users on the Authentication List tab.
- D. Open WatchGuard Server Center and review the configuration history for managed devices.
Answer: A,D
NEW QUESTION # 55
With the policies configured as shown in this image, HTTP traffic can be sent and received through branch office VPN tunnel.1 and tunnel.2.
- A. False
- B. True
Answer: A
NEW QUESTION # 56
Which of these threats can the Firebox prevent with the default packet handling settings? (Select four.)
- A. Malware in downloaded files
- B. Flood attacks
- C. Access to inappropriate websites
- D. Denial of service attacks
- E. Viruses in email messages
- F. Port scans
- G. IP spoofing
Answer: B,D,F,G
NEW QUESTION # 57
The IP address for the trusted interface on your Firebox is 10.0.40.1/24, but you want to change the IP address for this interface. How can you avoid a network outage for clients on the trusted network when you change the interface IP address to 10.0.50.1/24? (Select one.)
- A. Create a 1-to-1 NAT rule for traffic from the 10.0.40.0/24 subnet to addresses on the 10.0.50.0/24 subnet.
- B. Add a route to 10.0.40.0/24 with the gateway 10.0.50.1.
- C. Add 10.0.40.1/24 as a secondary IP address for the interface.
- D. Add IP addresses on the 10.0.40.0/24 subnet to the DHCP Server IP address pool for this interface.
Answer: C
NEW QUESTION # 58
......
The WatchGuard Essentials (Fireware Essentials) Exam is an excellent certification program for IT professionals, network administrators, and security analysts who are responsible for implementing and maintaining WatchGuard's Firebox security solutions. The exam covers a wide range of topics, including basic networking concepts, firewall fundamentals, VPN setup and configuration, web security, and email security. The hands-on lab exercises are designed to test the candidate's ability to configure and troubleshoot WatchGuard's Firebox security appliances, making this certification highly valuable for anyone looking to enhance their security skills and knowledge.
Essentials Deluxe Study Guide with Online Test Engine: https://www.torrentvce.com/Essentials-valid-vce-collection.html
NEW 2023 Certification Sample Questions Essentials Dumps & Practice Exam: https://drive.google.com/open?id=1-JpwmioWkmVbHcvan-3Fo5jesYfejOJH